Canon printer imageCLASS MF4880dw User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF4880dw User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
21 Basic Operation 4 Neatly place the documents face up.• Place the document under the load limit guides (A). • Make sure that the paper stack does not exceed the load limit marks (B). # 5 Align the document guides tightly to the width of the document. IMPORTANTIMPORTANT If the document guides are too loose or too tight, this may result in misfeeds or paper jams. IMPORTANTIMPORTANT • While scanning documents, do not add or remove documents. • When scanning is complete, remove the document from the...
Page 22
![Page 22
22
Load Paper
Before loading paper, check the paper is the right type. If you load inappropriate paper
repeatedly, this may cause paper jams.
1Step Check if the type of paper is appropriate.
Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details
about the available paper or precautions, see [Basic Operation] [Loading paper ] in
the e-Manual.
To prevent paper jams, do not use any of the following:
• Wrinkled or creased paper
• Curled or rolled paper
• To r n...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-21.png "Page 22
22
Load Paper
Before loading paper, check the paper is the right type. If you load inappropriate paper
repeatedly, this may cause paper jams.
1Step Check if the type of paper is appropriate.
Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details
about the available paper or precautions, see [Basic Operation] [Loading paper ] in
the e-Manual.
To prevent paper jams, do not use any of the following:
• Wrinkled or creased paper
• Curled or rolled paper
• To r n...")
22 Load Paper Before loading paper, check the paper is the right type. If you load inappropriate paper repeatedly, this may cause paper jams. 1Step Check if the type of paper is appropriate. Paper such as Legal, Letter, Statement, Executive, and envelopes can be used. For details about the available paper or precautions, see [Basic Operation] [Loading paper ] in the e-Manual. To prevent paper jams, do not use any of the following: • Wrinkled or creased paper • Curled or rolled paper • To r n...
Page 23
23 Basic Operation Loading Paper in the Paper Cassette This section describes how to load letter paper in the Paper Cassette. When loading envelopes or paper with a letterhead, see ”Loading Envelopes or Paper with a Letterhead” ( →p.25). 1 Lift the dust cover. 2 Spread the paper guides a little wider than the paper size. 3 Gently load the paper into the paper cassette with the print side face up, until the edge of the paper stack me ets the back of the paper cassette. • Make sure that the paper...
Page 24
24 5 Close the dust cover. 6 Specify the loaded paper size and type (→p.25). Loading Paper in the Multi-Purpose Tray 1 Spread the paper guides a little wider than the paper. 2 Gently load the paper into the paper cassette with the print side face up, and adjust the paper guides tightly to the width of the paper. IMPORTANTIMPORTANT If the paper guides are too loose or too tight, this may result in misfeeds or paper jams. 3 Specify the loaded paper size and type (→p.26).
Page 25
25 Basic Operation Loading Envelopes or Paper with a Letterhead This section describes how to load envelopes and paper with a letterhead. Envelopes Loading Orientation Load the paper properly by following the instructions below. #$ #$ 1-sided printing Load the paper with the printed side face up.2-sided printing (MF4890dw/MF4880dw only) Load the paper with the printed side face down. When printing with portrait layout When printing with landscape layout When printing with portrait layoutWhen...
Page 26
![Page 26
26
Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight or , and then press
[OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Size>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲] or [▼] to...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-25.png "Page 26
26
Setting a Paper Size and Type
Make sure that the Paper Settings match the size and the type of the loaded paper.
1 Press [ ] (Paper Settings).
2 Press [▲] or [▼] to highlight or , and then press
[OK].
3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK].
•
To specify the paper size manually, select < Custom Size>, and then refer to
“Specify a Paper Size Manually” at the bottom of this page to specify the size.
Paper Size
LTR
LGL
STMT
EXEC
4 Press [▲] or [▼] to...")
26 Setting a Paper Size and Type Make sure that the Paper Settings match the size and the type of the loaded paper. 1 Press [ ] (Paper Settings). 2 Press [▲] or [▼] to highlight or , and then press [OK]. 3 Press [▲] or [▼] to highlight the desired paper size, and then press [OK]. • To specify the paper size manually, select < Custom Size>, and then refer to “Specify a Paper Size Manually” at the bottom of this page to specify the size. Paper Size LTR LGL STMT EXEC 4 Press [▲] or [▼] to...
Page 27
![Page 27
27
Basic Operation Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode).
• By default, the Quiet mode is set to . To change this setting to < On>,
and specify the time to switch to the Quiet mode automatically, press
[
] (Menu) ,
and then specify a time.
• When the Quiet mode is On, the processing speed of functions becomes
slower.
• The Quiet mode cannot be used with some paper sizes or types.
• The Special mode has higher priority than the...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-26.png "Page 27
27
Basic Operation Switch to the Quiet Mode
You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode).
• By default, the Quiet mode is set to . To change this setting to < On>,
and specify the time to switch to the Quiet mode automatically, press
[
] (Menu) ,
and then specify a time.
• When the Quiet mode is On, the processing speed of functions becomes
slower.
• The Quiet mode cannot be used with some paper sizes or types.
• The Special mode has higher priority than the...")
27 Basic Operation Switch to the Quiet Mode You can switch to and cancel the Quiet mode, by pressing [ ] (Quiet Mode). • By default, the Quiet mode is set to . To change this setting to < On>, and specify the time to switch to the Quiet mode automatically, press [ ] (Menu) , and then specify a time. • When the Quiet mode is On, the processing speed of functions becomes slower. • The Quiet mode cannot be used with some paper sizes or types. • The Special mode has higher priority than the...
Page 28
![Page 28
28
Use the Toner Saver Mode
You can set whether or not to conserve toner when copying or faxing. When using the
Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light
colors, may not be clearly reproduced.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Sw
...
4 Press [▲] or [▼] to highlight...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-27.png "Page 28
28
Use the Toner Saver Mode
You can set whether or not to conserve toner when copying or faxing. When using the
Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light
colors, may not be clearly reproduced.
1 Press [ ] (Menu).
2 Press [▲] or [▼] to highlight , and then press [OK].
3 Press [▲] or [▼] to highlight , and then press [OK].
Preferences
Sound Volume Control
Display Settings
Toner Saver Mode
Paper Feed Method Sw
...
4 Press [▲] or [▼] to highlight...")
28 Use the Toner Saver Mode You can set whether or not to conserve toner when copying or faxing. When using the Toner Saver mode, the output may not be clear, as subtle details, such as thin lines and light colors, may not be clearly reproduced. 1 Press [ ] (Menu). 2 Press [▲] or [▼] to highlight , and then press [OK]. 3 Press [▲] or [▼] to highlight , and then press [OK]. Preferences Sound Volume Control Display Settings Toner Saver Mode Paper Feed Method Sw ... 4 Press [▲] or [▼] to highlight...
Page 29
![Page 29
29
Make a Basic Copy ………………………………………………\
…… 30
Copy by Saving Paper ………………………………………………\
… 31
Enlarge or Reduce Copies …………………………………………… 31
Adjust the Image Quality for Copy …………………………………… 32Adjusting the density ………………………………………………\
32
Se lec
ting the Document Type ……………………………………… 32
Adjusting the sharpness …………………………………………… 33
Make Double-Sided Copies (MF4890dw/MF4880dw Only) ………… 34
C o
py Multiple Pages onto One Sheet ……………………………… 35
Collate Copies ………………………………………………\
………… 35
Copy a...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-28.png "Page 29
29
Make a Basic Copy ………………………………………………\
…… 30
Copy by Saving Paper ………………………………………………\
… 31
Enlarge or Reduce Copies …………………………………………… 31
Adjust the Image Quality for Copy …………………………………… 32Adjusting the density ………………………………………………\
32
Se lec
ting the Document Type ……………………………………… 32
Adjusting the sharpness …………………………………………… 33
Make Double-Sided Copies (MF4890dw/MF4880dw Only) ………… 34
C o
py Multiple Pages onto One Sheet ……………………………… 35
Collate Copies ………………………………………………\
………… 35
Copy a...")
29 Make a Basic Copy ………………………………………………\ …… 30 Copy by Saving Paper ………………………………………………\ … 31 Enlarge or Reduce Copies …………………………………………… 31 Adjust the Image Quality for Copy …………………………………… 32Adjusting the density ………………………………………………\ 32 Se lec ting the Document Type ……………………………………… 32 Adjusting the sharpness …………………………………………… 33 Make Double-Sided Copies (MF4890dw/MF4880dw Only) ………… 34 C o py Multiple Pages onto One Sheet ……………………………… 35 Collate Copies ………………………………………………\ ………… 35 Copy a...
Page 30
![Page 30
30
Make a Basic Copy
1 Place your documents (→p.19).
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.16).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
. ..
2-Sided: Off
1
+
-
01
4 Press [ ] (Start).
Canceling Copy Jobs
Press [ ] (Stop) twice.
* It is...](http://img.usermanuals.tech/thumb/14/987/w300_printer-imageclass-mf4880dw-1478272381_d-29.png "Page 30
30
Make a Basic Copy
1 Place your documents (→p.19).
IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in
misfeeds or paper jams.
2 Switch to the Copy mode (→p.16).
3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.•
Press [ ] (Clear) to delete the entered copy quantity.
Copy: Press Start
100% LTR
Density: 0
Original Type: Text
. ..
2-Sided: Off
1
+
-
01
4 Press [ ] (Start).
Canceling Copy Jobs
Press [ ] (Stop) twice.
* It is...")
30 Make a Basic Copy 1 Place your documents (→p.19). IMPORTANTIMPORTANTIf the document guides are too loose or too tight, this may result in misfeeds or paper jams. 2 Switch to the Copy mode (→p.16). 3 Enter the desired copy quantity (1 to 99) with the alphanumeric keys.• Press [ ] (Clear) to delete the entered copy quantity. Copy: Press Start 100% LTR Density: 0 Original Type: Text . .. 2-Sided: Off 1 + - 01 4 Press [ ] (Start). Canceling Copy Jobs Press [ ] (Stop) twice. * It is...