Canon printer imageCLASS MF3110 User Manual

							Printing Documents4-3
Printing from Your Computer
4
Printing Documents
The general steps for printing a document are explained below. 
1Load paper in the cassette or the multi-purpose feeder.
For details on how to load paper, see Loading Paper, on p. 2-4.
2Open the document in an application.
3Select the command to print. 
In most cases, click [Print] in the [File] menu.
The [Print] dialog box appears.
4From the [Select Printer] list box or the [Name] pull-down list in 
the [Print] dialog box, select the printer to be used.
5Click [Preference] or [Properties].
NOTE
Depending on the application you are using, select the printer to be used in the [General] 
tab sheet in the [Print] dialog box, then specify the print settings in the corresponding tab 
sheet. (Only for Windows 2000.)
6Specify the required settings ➞ click [OK].
7Click [Print] or [OK].
Printing starts.
NOTE
To cancel printing, click [Cancel].
LD_Basic_US.book  Page 3  Wedn esday, June 30, 2004  2:02 PM 
						

							Printing Documents4-4
Printing from Your Computer
4
Canceling Printing
1Open the [Printers and Faxes] (Windows 98/Me/2000: [Printers]) 
folder.
●On Windows XP:
❑
Click [start] on the Windows task bar  ➞ select [Printers and Faxes].
● On Windows 98/Me/2000:
❑
Click [Start] on the Windows task bar  ➞ select [Settings]  ➞ [Printers].
2Double-click the corresponding printer driver icon.
3Right click the print job  ➞ click [Cancel Printing].
NOTE
You can also cancel a print job using [Status Monitor] on the operation panel of the 
machine. (See Confirming and Deleting a Print Job, on p. 7-2.)
LD_Basic_US.book  Page 4  Wedn esday, June 30, 2004  2:02 PM 
						

							More Information4-5
Printing from Your Computer
4
More Information
For detailed information on all printing features, see Chapter 2, Printing, in the 
Software Guide.
LD_Basic_US.book  Page 5  Wedn esday, June 30, 2004  2:02 PM 
						

							More Information4-6
Printing from Your Computer
4
LD_Basic_US.book  Page 6  Wednesday, June 30, 2004  2:02 PM 
						

							CHAPTER
Documents You Can Copy5-1
5Copying
This chapter explains how to make copies, adjust scan settings to improve the image quality, 
and enlarge or reduce the copy sizes. It also describes the special copy features.
Documents You Can Copy
For information on the types of documents you can copy, their requirements, and 
details on setting up documents, see Chapter 3, Document Handling.
LD_Basic_US.book  Page 1  Wednesday, June 30, 2004  2:02 PM 
						

							Making Copies5-2
Copying
5
Making Copies
NOTE
•When making copies on LTR-size paper after having continuously copied on paper 
smaller than LTR-size paper, the copies may be dirty. To prevent copies from being dir ty, 
wait about 1 minute before making copies.
•When making copies of a small size or heavy paper*, etc., the copy speed may be 
slightly slower than usual.
* The paper type should be selected in the Menu. (See Specifying the Paper Type, on p. 
2-12.)
•If you intend to make a copy and print with a thermal transfer printer using the same 
sheet of paper, make the copy first. Failure to do so may make copies dirty or cause a 
paper jam.
•When copying onto transparencies, remove each transparency from the output tray as it 
is output.
1Place the document on the platen glass.
For details on how to place documents, see Placing a Document on the Platen Glass, 
on p. 3-3.
2Press [COPY].
3Use the numeric keys to enter the number of copies.
You can set up to 99 copies.
4Adjust any necessary settings for your document.
•Specify the size and the type of the paper you load in the cassette or the 
multi-purpose feeder. (See Specifying the Paper Size and Type (Common for 
Cassette and Multi-Purpose Feeder), on p. 2-11.)
•Press [Image Quality] to select the scanning resolution. (See Adjusting the Image 
Quality (Resolution), on p. 5-6.)
•Press [Exposure] to select the scanning exposure. (See Adjusting the Exposure 
(Density), on p. 5-6.)
•Press [Enlarge/Reduce] to select the copy ratio. (See Setting Enlarging/Reducing, 
on p. 5-4.)
LD_Basic_US.book  Page 2  Wednesday, June 30, 2004  2:02 PM 
						

							Making Copies5-3
Copying
5
5Press [Start].
NOTE
To cancel copying, press [Stop/Reset] ➞ follow the instructions in the LCD.
You can also cancel copying using [Status Monitor]. (See Confirming and Deleting a Copy 
Job, on p. 7-1.)
LD_Basic_US.book  Page 3  Wedn esday, June 30, 2004  2:02 PM 
						

							Setting Enlarging/Reducing5-4
Copying
5
Setting Enlarging/Reducing
You can enlarge or reduce the copy size using preset copy ratios or using custom 
copy ratios.
Enlarging/Reducing Using Preset Copy Ratios
1Press [Enlarge/Reduce].
2Press [ (-)] or [ (+)] to select the copy ratio ➞ press [Set].
You can select from the following:
-200%  MAX.
-129%  STMT  ➞ LT R  
-100%
- 78%          ➞ LT R
-64% 
-50%  MIN.
NOTE
•If the  setting of  menu in the Menu is set to 
 or , the preset copy ratios will be as follows:
A: 50%, 70%, 100%, 141% and 200%;
AB: 50%, 70%, 81%, 86%, 100%, 115%, 122%, 141% and 200%.
•Enlarging or reducing using preset copy ratio is not available with the 2 on 1 copy 
function.
•To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display 
 ratio 
➞ press [Set].
You can also return the ratio to 100% using a custom copy ratio. (See Enlarging/
Reducing Using Custom Copy Ratios, on p. 5-5.)
LD_Basic_US.book  Page 4  Wedn esday, June 30, 2004  2:02 PM 
						

							Setting Enlarging/Reducing5-5
Copying
5
Enlarging/Reducing Using Custom Copy Ratios
1Press [Enlarge/Reduce] twice.
2Use the numeric buttons to enter the copy ratio ➞ press [Set].
•You can enter the copy ratio from 50% to 200%, selectable in 1% increments.
•Even after entering the copy ratio, you can use [ (-)] or [ (+)] to adjust the copy 
ratio. To increase the copy ratio, press [ (+)]. To decrease the copy ratio, press 
[ (-)].
NOTE
•Enlarging or reducing using a custom copy ratio is not available with the 2 on 1 copy 
function.
•To return the copy ratio to 100%, press [Enlarge/Reduce] several times to display 
 ratio 
➞ press [Set].
You can also return the ratio to 100% using a preset copy ratio. (See Enlarging/
Reducing Using Preset Copy Ratios, on p. 5-4.)
➞ZOOM  50-200%
 -       80%      + 80%        LTR 
      TEXT/PHOTO01
LD_Basic_US.book  Page 5  Wedn esday, June 30, 2004  2:02 PM 
						

							Improving Copied Image5-6
Copying
5
Improving Copied Image
Adjusting the Image Quality (Resolution)
You can adjust image quality to the appropriate level best suited for a document 
with text or photos. Three modes are available for adjusting the image quality.
1Press [Image Quality].
2Press [Image Quality] repeatedly until the image quality you want 
appears.
You can select from the following:
-  for text-only documents
-  for photographs
-  for documents with text and photographs
NOTE
Copy exposure automatically changes to manual mode when  or 
 is set.
Adjusting the Exposure (Density)
You can adjust the copy exposure automatically or manually according to how light 
or dark your document is.
■Adjusting Automatically
1Press [Exposure] twice to select the auto mode  ➞ press [Set].
The copy exposure is adjusted automatically.
NOTE
Image quality mode automatically changes to  when  is set. 
➞EXPOSURE
  AUTO EXPOSURE100%        LTR
  A   TEXT01
LD_Basic_US.book  Page 6  Wedn esday, June 30, 2004  2:02 PM