Canon printer imageCLASS MF247dw User Manual
Here you can view all the pages of manual Canon printer imageCLASS MF247dw User Manual. The Canon manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 611
4Shakethetonercartridge5or6timesasshownbelowtoevenlydistributethetoner insidethecartridge.5Installthetonercartridge. Align the right and left projections () with the toner cartridge guides, and push securely all the way in. 6Closethetonercover,andlowertheoperationpanel. Ifyoucannotclosethetonercover Make sure that the toner cartridge is inserted properly.Forcing it closed may cause damage. LINKS ReplacingTonerCartridges(P.599) Maintenance 603
Page 612
HowtoReplaceTonerCartridges 1469-0A5 Read the precautions in MaintenanceandInspections(P.9) and Consumables(P.10) before replacing the toner cartridges. 1Lifttheoperationpanel. Ifyoucannotlifttheoperationpanel Make sure the feeder is completely closed. If a thick original such as a book is placed on the platen glass, remove the original. Forcing the operation panel up may cause damage....
Page 613
4Removethereplacementtonercartridgefromtheprotectivebag.5Shakethetonercartridge5or6timesasshownbelowtoevenlydistributethetoner insidethecartridge,andthenplaceitona 5atsurface.6Pullthesealingtapestraightout. The full length of the sealing tape is approximately 19 3/4" (50 cm). Whenpullingoutthesealingtape If the sealing tape remains inside the toner cartridge, the quality of printouts, including faxes, may deteriorate. Also note that it will not be...
Page 614
If the sealing tape becomes stuck when pulling it out, keep pulling until it is completely removed. 7Installthetonercartridge. Align the right and left projections () with the toner cartridge guides, and push securely all the way in. 8Closethetonercover,andlowertheoperationpanel. Ifyoucannotclosethetonercover Make sure that the toner cartridge is inserted properly. Forcing it closed may cause damage. LINKS BeforeReplacingtheTonerCartridge(P.602) Maintenance 606
Page 615
RelocatingtheMachine 1469-0A6 The machine is heavy. Make sure to follow the procedures below when moving the machine to avoid injury, and also make sure to read the safety precautions before you begin. ImportantSafetyInstructions(P.2) 1TurnOFFthemachineandcomputer. When you turn OFF the machine, data that is waiting to be printed is deleted. Fax documents that were received by using the Memory Reception function, faxes that are waiting to be sent, and reports that are automatically printed...
Page 616
Lift by the carrying grips on the front of the machine. 6Carefullyplacethemachineatthenewinstallationsite. For installation steps after moving, see "Getting Started". ManualsIncludedwiththeMachine(P.660) Maintenance 608
Page 617
PrintingReportsandLists 1469-0A7 You can check fax results and the machine settings by printing reports and lists. TXResultReport You can check the logs of sent documents. TXResultReport(P.610) CommunicationManagementReport You can check the logs of sent and received documents. CommunicationManagementReport(P.613) RXResultReport You can check the logs of received fax documents. RXResultReport(P.615) ConsumablesStatusReport You can check the consumables status installed in the machine....
Page 618
TXResultReport 1469-0A8 You can check the fax or e-mail logs of sent documents as well as documents saved to a shared folder by printing a TX Result Report. The report can be printed either every time a transmission is completed or only when a sending error occurs. or Select the print setting Select if you do not want to print TX Result Reports. Select to print a TX Result Report every time you send a document. Select to print a TX Result Report only when a sending error occurs. Example:...
Page 619
Result "OK" indicates that the transmission was completed successfully while "NG" and three digits (an error code) indicates that the transmission failed ( WhenanErrorCodeAppears(P.560) ). Sent/Error For e-mail, TX Result Reports indicate the transmission result between the machine and the mail server, not between the machine and the destination address. Even if the transmission fails, a three-digit error code will not be printed. To check the error code, print a Communication...