Canon printer imageCLASS D761 User Manual

3-12
3
Printer Properties
■Finishing Tab
Specifies how final output is collated and printing pages in reverse output order. Check the 
check boxes to collate the document or print it in reverse output order. 

3-13
3
Printer Properties
■Paper Source
Specifies the paper source and paper type settings.
Paper Source lets you specify paper feed method. Select from Cassette or Multi-purpose 
Tr a y.
Paper Type lets you select from following types of paper:
•Plain Paper (including colored paper, recycled paper: 17-20lb bond / 64-80g/m
2)
•Transparencies*
•Tracing Paper* (tracing paper, thin paper: 15-19lb bond / 52-63g/m
2)
•Special Paper 1* (thick paper)
•Special Paper 2* (postcards, envelopes: 21-32lb bond /...

3-14
3
Printer Properties
■Quality Tab
Specifies the resolution, halftoning method, brightness, and contrast settings.
Resolution lets you specify the printer’s resolution in dots per inch (600,300).
Halftones is the process of converting a greyscale image to black dots and white (unprinted) 
dots that simulate the grey shades in the original image. Different halftone patterns give 
different grey shade results.
Brightness is the relative proportion of light and dark areas. Decreasing brightness darkens...

3-15
3
Printer Properties
Detailed Settings
Details... accesses the settings for toner saver, and Image Refinement.
To n e r  S a v e thins the black areas of print data, so toner consumption is reduced.
Image Refinement is a printer technology from Canon, with which the printer automatically 
senses and refines the jagged edges and ragged curves of characters and graphics. 

3-16
3
Printer Properties
The CAPT for Windows NT 4.0/2000/XP has two main dialog boxes: the Printer Properties 
dialog box and the Default Document Properties* dialog box.
Printer Properties
To view the printer properties, select Properties from the File menu in the Printers (in 
Windows XP, Printers and Faxes) folder, or click the right mouse button on the Canon 
PC1200/iC D700 icon in the Printers (in Windows XP, Printers and Faxes) folder and select 
Properties from the pop-up menu.
Default Document...

3-17
3
Printer Properties
■General Tab
Specifies to print a test page and separator pages. Refer to your Windows operating system 
documentation for more information.
■
Por ts Tab
Lets you specify the port to which the printer is attached. Refer to your Windows operating 
system documentation for more information. 

3-18
3
Printer Properties
■Scheduling Tab
Lets you define print spooling settings. Refer to your Windows operating system 
documentation for more information.
“Spool print documents so program finishes printing faster” and “Start printing 
immediately” are set automatically when you install the printer driver.
■
Sharing Tab
Specifies the printer-sharing settings. Refer to your Windows operating system documentation 
for more information. 

3-19
3
Printer Properties
■Security Tab
Lets you specify security settings. Refer to your operating system documentation for more 
information. 

3-20
3
Printer Properties
■Paper Selection Tab
This printer driver supports three custom paper sizes. Using the custom forms defined on the 
Forms tab in the print server’s Properties dialog box, you can add information about the 
custom paper sizes. Form definitions must conform to the printer’s specifications.
Selected Paper shows the three sizes names.
Change Paper… opens the Change Paper dialog. This dialog contains a listing of the 
available papers, and their definitions (Available Paper has...

3-21
3
Printer Properties
■Page Setup Tab
Specifies paper size, scaling, number of copies, orientation, and pages per sheet.
Default settings depend on the country/region of purchase.
Page Size lets you select the paper size you are working with in your application. (A3, 
B4(JIS), A4, B5(JIS), A5, Letter, Legal, Executive, Statement, Envelope DL, Envelope #10, 
Envelope C5, Envelope Monarch, and 3 custom paper sizes.)
Output Size lets you select the paper size to print on. If your output size is set to...