Canon printer imageCLASS D1180 User Manual

Settings from a PC
10-4
Starting the Remote UI
Starting the Remote UI
To start the Remote UI, follow the procedure described below.
Before you start the Remote UI, perform the followings:Select  in  located in , and verify the IP address of the 
machine. If you do not know the IP address, consult with your network administrator. (See “Confirming IP Address 
Settings,” in the e-Manual.)
If the IP address is not displayed, check if the machine is correctly connected to the computer. For details, see “Set...

Settings from a PC
10-5
Starting the Remote UI
4 
Enter the required data.
The required data differs depending on the 
authentication mode you are using.
■	For default settings:
①	 Select [Administrator Mode] or [End-User 
Mode].
②	Enter the password or user name and click 
[OK].
■	In case no management mode is set, and 
system manager ID and password are set:
①	 Select [Administrator Mode] or [End-User 
Mode].
②	For Administrator Mode, enter the system 
manager password, and click OK. For End-
User...

Settings from a PC
10-6
Starting the Remote UI
■	For Department ID Management mode:
	 Enter the department ID and password, and 
click [OK].
■	For User Management mode:
	 Enter the user ID and password, and click 
[OK].
If no password is set, you can log on without 
entering a password.
5 
Operate the machine.
Now you can manage the machine on the web 
browser.
For details, see “Settings from a PC,” in the e-
Manual. 

Maintenance 
11
Maintenance 
This chapter describes how to perform routine cleaning operations and replace a toner cartridge.
Cleaning the Machine ...............................................11-2
Exterior  ........................................................................\
......... 11-2
Fixing Unit  ........................................................................\
... 11-2
Automatic Feeder Cleaning  .......................................... 11-3
Scanning Area...

11-2
Maintenance 
Cleaning the Machine
Cleaning the Machine
Note the following before cleaning your machine:Make sure no documents are stored in memory when you turn OFF the main power switch 
and disconnect the power cord.
Use a soft cloth to avoid scratching the components.
Do not use tissue paper, paper towels, or similar materials for cleaning; they can stick to 
the components or generate static charges.
Never use volatile liquids such as thinner, benzene, acetone, or any other chemical cleaner to...

11-3
Maintenance 
Cleaning the Machine
2 
Press  or  to select , then press [OK].
  8 . A D J U S T . / C L E A N I N G M E N U
3 
Press  or  to select , then press [OK].
  1 . F I X . U N I T   C L E A N I N G A D J U S T . / C L E A N I N G
4 
Press  or  to select , then press [OK].
  1 . C L E A N   P A P E R   P R T F I X   U N I T   C L E A N I N G
Make sure that LTR paper is loaded in a paper 
source.
5 
Press  to select .
<   Y E S                       N O   > O K   T O   P R I N T ?
The cleaning...

11-4
Maintenance 
Cleaning the Machine
3 
Press  or  to select , then press [OK].
  2 . F E E D E R   C L E A N I N G A D J U S T . / C L E A N I N G
4 
Load 10 sheets of blank LTR paper into 
the ADF, then press [OK].
P R E S S   O K   K E Y S E T   1 0   S H E E T S   I N   A D F
ADF cleaning starts. When finished, the display 
returns to the standby mode.
Scanning Area
Keep the scanning area clean to avoid dirty copies 
or faxes to be sent.
Platen Glass
Clean the platen glass and the underside of the...

11-5
Maintenance 
Cleaning the Machine
ADF
If your documents have black streaks or appear 
dirty after copying them using the ADF, this may be 
caused by pencil lead rubbing off the documents 
and onto the roller. Clean the ADF scanning area 
and roller.
1 
Turn OFF the main power switch and 
disconnect the power cord.
2 
Open the ADF cover.
3 
Clean the rollers (A) inside the ADF with a 
cloth dampened with water. Then wipe 
the area with a soft, dry cloth.
Do not dampen the cloth too much, as this may...

11-6
Maintenance 
Cleaning the Machine
7 
Close the ADF.
Be careful not to get your fingers caught. 

11-7
Maintenance 
Replacing the Toner Cartridge
Replacing the Toner Cartridge
This section describes how to replace or handle the toner cartridges and precautions on 
storing them.
When a Message Appears
Toner cartridges are consumable products. If the toner is running low or out during printing, a message 
appears in the display.
MessageWhen it is Displayed Contents and Remedies
TONER LOW
PREPARE NEW TONER The toner is running low.
Distribute toner in the toner 
cartridge. (See “Redistributing 
Toner,”...