Canon printer imageCLASS D1180 User Manual

Fax (D1180/D1170/D1150) 
6-30
Selecting Image Quality
Selecting Image Quality
You can adjust the image quality of the document you send. The higher image quality you 
set, the better the output will be, but the longer the transmission will take. The default 
setting is .
1 
Place documents.
2 
Press  [SEND/FAX]/ [FAX].
3 
Press  [SEND/FAX] repeatedly to 
select , then press [OK].
S E L E C T : O K F A X
 For the D1150, skip this step.
4 
Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M...

Fax (D1180/D1170/D1150) 
6-31
2-Sided Documents
2-Sided Documents
You can set the machine to automatically turn over 2-sided documents that are placed in the 
ADF, and scan each side separately.
1 
Place documents in the ADF.
2 
Press  [SEND/FAX]/ [FAX].
3 
Press  [SEND/FAX] repeatedly to 
select , then press [OK].
S E L E C T : O K F A X
For the D1150, skip this step.
4 
Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19....

Fax (D1180/D1170/D1150) 
6-32
Sending Documents at a Preset Time (Delayed Sending)
Sending Documents at a Preset Time 
(Delayed Sending)
Delayed sending enables you to start transmission at a specified time. You can store up to 
70 delayed sending jobs. The default setting is .
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  1 . D E L A Y E D   S E N D T X / R X   S E T T I N G S
4 
Press  or  to select ,...

Fax (D1180/D1170/D1150) 
6-33
Sending Documents at a Preset Time (Delayed Sending)
10
 Specify the destination.
T E L = 0 1 2 X X X X X X X F A X   N U M B E R
Ex.
For details, see “Specifying Destinations,” on p. 6-
19.
If  in  in 
 is set to  and you 
specify a fax number using 
 – ,  [numeric 
keys] and  [ Tone], you must enter the fax 
number again for confirmation. Enter the same fax 
number you entered in step 10, then press [OK].
11
  Press  [Start].
The document is scanned and stored into...

Fax (D1180/D1170/D1150) 
6-34
Changing Density Level
Changing Density Level
This setting enables you to preset the standard density level on a nine-step scale. The 
default setting is  on a scale of 1 to 9. The level you define here applies when you select 
the “standard” level (in the middle of the scale) using 
 [Density] on the operation panel.
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R...

Fax (D1180/D1170/D1150) 
6-35
Standard Send Settings
Standard Send Settings
This mode enables you to specify the standard scan settings for density and resolution.
Storing the Standard Send Settings
You can change and store the Standard Send 
Settings. The default settings are as follows:: 
: 
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S...

Fax (D1180/D1170/D1150) 
6-36
Standard Send Settings
2 
Press  or  to select , then press [OK].
  4 . T X / R X   S E T T I N G S M E N U
3 
Press  or  to select , then press [OK].
  2 . T X / R X   C O M M O N   S E T . T X / R X   S E T T I N G S
4 
Press  or  to select , 
then press [OK].
  1 . T X   S E T T I N G S T X / R X   C O M M O N   S E T .
5 
Press  or  to select , then press [OK].
1 0 . I N I T   S T A N D A R D   S E T T X   S E T T I N G S
6 
Press  to select .
<   Y E S...

Fax (D1180/D1170/D1150) 
6-37
Printing the TX Terminal ID
Printing the TX Terminal ID
The TX Terminal ID setting enables you to specify the details included in the Terminal ID 
information printed on faxed documents. Information such as your fax number and name 
can be included to let the recipient know who sent the document. You can set the position of 
the Terminal ID information on the paper. The default settings are as follows:: 
: 
–
–
1 
Press  [Menu].
2 
Press  or  to select , then press [OK].
  4...

Fax (D1180/D1170/D1150) 
6-38
Printing the TX Terminal ID
9 
Press  or  to select  or 
, then press [OK].
                                  F A X T E L E P H O N E   #   M A R K
: “ TEL” is printed before the fax/
telephone number.
: “FAX” is printed before the fax/
telephone number.
10
  Press  [Stop/Reset] to return to the 
standby mode.
–
– 

Fax (D1180/D1170/D1150) 
6-39
ECM Transmission
ECM Transmission
ECM (Error Correction Mode) reduces the effect of system and line errors on documents that 
occur during sending or receiving with another fax machine that supports ECM. If the other 
machine does not support ECM, this setting is ignored. If transmission speed appears to be 
extremely slow, you may be able to speed up transmission time by turning ECM off. The 
default setting is .
If you want to transmit using ECM, it is necessary that ECM...