Canon printer Color imageCLASS MF9150c User Manual

							11-20
Transporting the Machine
Maintenance
4 
If you are using the stack bypass tray, fold 
stack bypass tray extension, push back 
the auxiliary tray into place, and then 
close the stack bypass tray.
5 
Pull out the paper drawer gently.
6 
Hold the paper drawer with both hands 
and remove it from the machine.
Remove the Cassette Feeding Unit-AC1 from the 
machine if it is installed. To remove the Cassette 
Feeding Unit-AC1, perform the installation 
procedure in reverse. (See the sheet “Cassette 
Feeding Unit-AC1 Setup Instruction.”) 
						

							11-21
Transporting the Machine
Maintenance
7 
Pick up the machine using the hand grips 
on the left, right and back of the machine.
Be sure at least two people carry the machine.
Do not lift the machine by any of its 
attachments. Dropping the machine can cause 
personal injury.
If you have a back problem, make sure to check 
the weight of this machine before carrying. 
(See “Specifications
,” on p. 14-2.)
If you need to install the Cassette Feeding Unit-
AC1 in the machine, place the feeder at the 
installation site first, and then transport the 
machine to the site. For directions on how to 
install the Cassette Feeding Unit-AC1, see the 
sheet “Cassette Feeding Unit-AC1 Setup 
Instruction.” –
–
– 
						

							11-22
Transporting the Machine
Maintenance 
						

							Troubleshooting
This chapter explains how to respond to paper and original jams, as well as to error messages.
Troubleshooting
Chapter
12
Clearing Jams .............................................................12-2
Original Jams  ...................................................................... 12-3
Paper Delivery Tray  ........................................................... 12-5
Duplex Unit  ........................................................................\
. 12-6
Stack Bypass Tray  .............................................................. 12-8
Paper Drawer 1  ................................................................12-10
Optional Paper Drawer (Paper Drawer 2)  ...............12-11
Inside of the Machine  ....................................................12-13
Fixing Unit  ........................................................................\
.12-16
Back Cover  ........................................................................\
.12-18
When the Message Does Not Disappear  ................12-19
If the Delivery Feeder Unit Is Not Installed  
Correctly  ...................................................................12-22
Error Messages.........................................................12-25
Error Codes  ...............................................................12-30
If  is displayed  .................12-36
Reloading the Paper  ......................................................12-36
Changing the Paper Size Setting  ..............................12-36
If a Power Failure Occurs  .........................................12-39
If You Cannot Solve a Problem  ................................12-40
Customer Support (U.S.A.)  ...........................................12-40
Customer Support (Canada)  .......................................12-40    
						

							12-2
Clearing Jams
Troubleshooting
Clearing Jams
When , , or  appears on the display, remove the jammed paper from the machine. The screen 
indicating the location of the paper jam and the procedure for clearing the paper jam 
appears on the display, and it remains there until the paper jam is entirely cleared.
Check the following if you experience repeated paper jams:Check that the paper you are using meets the requirements for use. (See “Paper 
Requir

ements,” on p. 2- 7.)
Make sure you have removed any scraps of paper from the inside of the machine.
Fan and tap the paper stack on a flat surface before loading it in the machine.
When removing jammed paper or when inspecting the inside of the machine, do not allow necklaces, bracelets, or other 
metal objects to touch the inside of the machine, as this may result in burns or electrical shock.
The fixing unit and its surroundings inside the printer are hot during use. Make sure the fixing unit is completely cool 
before removing the jammed paper. Touching the fixing unit when it is still hot may result in burns.
If loose toner comes into contact with your skin or clothing, wash with cold water. Warm water will set the toner.
When removing paper which has become jammed inside the machine, remove the jammed paper gently to prevent the 
toner on the paper from scattering and getting into your eyes or mouth. If the toner gets into your eyes or mouth, wash 
them immediately with cold water and immediately consult a physician.
When removing jammed original or paper, take care not to cut your hands on the edges of the original or paper.
After clearing all paper jams, remove your hands from the machine immediately. Even if the machine is not in operation, 
your hands, hair, or clothing may get caught in the feed rollers, which could result in personal injury or damage if the 
machine suddenly starts printing.
Remove jammed paper while the power of the printer is on. If the power is turned off, the data being printed will be 
deleted. When you remove the fixing unit to remove jammed paper, however, the data being printed will be deleted 
because you have to turn the machine OFF.
Applying excess force may result in tearing paper or damaging the parts in the printer. When removing jammed paper, 
pull out the paper in the most appropriate direction, judging from the position of the paper.
Applying excess force may result in tearing paper or damaging the parts in the printer. When removing jammed paper, 
pull out the paper in the most appropriate direction, judging from the position of the paper.
Do not place any object on or touch the transfer belt of the delivery feeder unit. The transfer belt of the delivery feeder 
unit is supplied with a function that cleans itself, therefore, do not clean the belt even when the toner is on it. If the 
delivery feeder unit is broken or transfer belt is damaged, this may result in misfeeds or deterioration in print quality.
If the error message still remains after having removed the jammed paper without handling the front cover or top cover, 
open and close the front cover to reset the machine.
–
–
–
–
–
–
–
–
–
–
–
–
–
– 
						

							12-3
Clearing Jams
Troubleshooting
1 
Open the feeder cover.
2 
Hold both sides of any jammed original 
and gently pull it out.
Do not force a jammed original out of the 
machine.
If the jammed original cannot be removed easily,  
proceed to the next step.
3 
Open the inner cover, holding it by its 
front tab (A).
4 
Lift the release lever (A) until it clicks into 
place.
Original Jams
If a screen similar to the one shown below appears on the display, remove the jammed original from the 
feeder. Then press the right Any key to display the next procedure. 
						

							12-4
Clearing Jams
Troubleshooting
5 
Remove the jammed original.
Do not force a jammed paper out of the machine 
as it may tear.
6 
Return the release lever (A) to its original 
position.
7 
Close the inner cover.
8 
Close the feeder cover.
9 
Load the original in the feeder again. 
						

							12-5
Clearing Jams
Troubleshooting
1 
Hold both sides of any jammed paper and 
gently pull it out.
Do not force a jammed paper out of the machine.
If the jammed paper cannot be removed easily,  
proceed to the next step.
If unfixed toner is on the removed paper, it may 
adhere to the paper to be printed next.
2 
Open and close the front cover to reset 
the machine.
If you are using the stack bypass tray, close it 
before opening the front cover. Use the handle 
(A) to gently close the front cover.
Be careful not to get your fingers caught.
Paper Delivery Tray
If a screen similar to the one shown below appears on the display, remove the jammed paper from the output 
tray. Then press the right Any key to display the next procedure. 
						

							12-6
Clearing Jams
Troubleshooting
1 
Lift the scanning platform (A) until it is 
locked. 
2 
Open the inner cover, holding it by its 
center tab (A).
3 
Hold both sides of any jammed paper and 
gently pull it out.
Do not force a jammed paper out of the machine.
If the jammed paper cannot be removed easily,  
proceed to the next step.
4 
Close the inner cover.
Duplex Unit
If a screen similar to the one shown below appears on the display, remove the jammed paper from the duplex 
unit. Then press the right Any key to display the next procedure. 
						

							12-7
Clearing Jams
Troubleshooting
5 
Lower the scanning platform.
Be careful not to get your fingers caught.
6 
Open and close the front cover to reset 
the machine.
If you are using the stack bypass tray, close it 
before opening the front cover.
Close the front cover gently holding the handle 
(A).
Be careful not to get your fingers caught.