Canon printer Color imageCLASS MF9150c User Manual

Copying
4-42
Erasing Shadows/Lines
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
Original Frame Erase
This mode erases the dark borders and frame lines that appear around the copy if the original is smaller than 
the selected paper size. You can also use this mode to...

Copying
4-43
Erasing Shadows/Lines
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key 
to select  .
■  If you want to set the same width for all four 
borders:
①

  Use [▼], [▲] or 
 (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The default setting is . The 
maximum original frame erase width that you 
can set is .
To enter values in millimeters, press the left Any 
key to select . When entering the...

Copying
4-44
Erasing Shadows/Lines
③ Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].  
The default setting is . The 
maximum original frame erase width that you 
can set is .
If you want to change the value, press 
 
(Clear) before entering the new value.
If you enter a value outside the setting range, a 
message prompting you to enter an 
appropriate value appears on the screen.
–
–
–
④ 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
The display will...

Copying
4-45
Erasing Shadows/Lines
Book Frame Erase
This mode erases the dark borders and the center and contour lines that appear when you copy facing pages 
in a book or bound original onto a single sheet of paper.
The Book Frame Erase mode cannot be used with the N on 1.
You must place an original on the platen glass when using this function.
–
–
1 
Set an original on the platen glass.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select...

Copying
4-46
Erasing Shadows/Lines
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the A/B Sizes, press the left Any key 
to select .
7 
Enter the each erase width value:
■  If you want to specify the erase width 
value for center:
① Use [▼], [▲] or 
 (Scroll Wheel) to select 
, then press [OK].  
To enter values in millimeters, press the left Any 
key to select .
 ② Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The...

Copying
4-47
Erasing Shadows/Lines
② Use [▼], [▲] or  (Scroll Wheel) to enter a 
frame erase width value, then press [OK].
The default setting is . The 
maximum original frame erase width that you can 
set is .
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
9 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
10
  Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
11
  Press  (Main...

Copying
4-48
Erasing Shadows/Lines
1 
Set an original on the platen glass.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , 
then press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
Binding Erase
This mode erases the shadows that appear on copies from binding holes on originals.
Do not place originals with binding holes into the feeder, as this...

Copying
4-49
Erasing Shadows/Lines
6 
Use [▼], [▲] or  (Scroll Wheel) to select 
the original size, then press [OK].
To switch to the inch sizes, press the left Any key 
to select .
7 
Use [▼], [▲] or  (Scroll Wheel) to select 
the hole punch location, then press [OK].
To enter values in millimeters, press the left Any 
key to select .
8 
Use [▼], [▲] or  (Scroll Wheel) to select 
the frame erase width, then press [OK].
The default setting is . The 
maximum original frame erase width that you 
can set is...

Copying
4-50
Erasing Shadows/Lines
10
 Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
11
  Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-51
Adjusting Color Balance
1 
Set documents.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then press 
[OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired color, then press [OK].
Adjusting Color Balance
This mode enables you to adjust the color balance depending on the color of the originals. 
The adjusted color balance can be stored and named...