Canon printer Color imageCLASS MF9150c User Manual

Copying
4-2
Overview of Copy Functions
Overview of Copy Functions
In addition to the enlarging/reducing the copy, you can make 2-sided copies or use the N on 
1 mode, which reduces multiple originals to fit on one sheet of paper.
(p. 4-11)
(p. 4-34)
(p. 4-17) 

Copying
4-3
Overview of Copy Functions
(p. 4-22)(p. 4-30)
(p. 4-36) 

Copying
4-4
Basic Copying Method
Basic Copying Method
This section describes the basic procedure for copying.
1 
Place originals on the platen glass or load 
it them in the feeder.
For details, see “Placing Originals,” on p. 2-4.
Close the feeder after placing your originals.
For originals you can copy, see “Originals 
R

equirements,” on p. 2- 2.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
–
–
–
4 
Make the copy settings you require.
You can specify the...

Copying
4-5
Basic Copying Method
: Makes multiple 
copies. (See “M
aking Multiple Copies,” on p. 4-
59.)
When you press 
 (Reset), all settings will 
return to the Standard mode. If you want to 
keep your own settings as the Standard 
mode, see “Chang
 ing Standard Mode,” on p. 4-
66.
5 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
If you make a mistake when entering values, 
press 
 (Clear) and enter the correct values. The 
copy quantity appears on the right side of the 
Copy top...

Copying
4-6
Canceling Copy Jobs
Canceling Copy Jobs
You can cancel scanning or ongoing jobs.
If you cancel a copy job during scanning, make sure to remove the original.
1 
Press the left Any key to select .
The display will return to the Copy top screen.
 While the machine is scanning, printing, or 
waiting to print, you can cancel a copy job by 
pressing 
 (Stop).
2 
Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-7
Selecting Color Mode
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].  
4 
Use [▼], [▲] or  (Scroll Wheel) to 
display , then 
press [OK].
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the color mode, then press [OK].
: For the automatic 
selection of color or B&W
: For copies in full-color
: For black and white copies
–
–
–
Selecting Color Mode
This section describes how to select the...

Copying
4-8
Selecting Color Mode
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
8 
Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-9
Selecting Paper Source
Selecting Paper Source
You can manually specify a paper source.  
The default setting is .
If you are copying an original with an image that extends all the way to the edges onto the same size paper at a copy ratio 
of 100%, the periphery of the original image may be cut off slightly on the copy. For details, see “Scanning Area,” on p. 11-4.
The suffix  (such as in STMTR), used in paper size designations, indicates that the paper is loaded in a paper drawer or 
the...

Copying
4-10
Selecting Paper Source
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper source, then press [OK].
6 
Use – (numeric keys) to enter the 
desired copy quantity (1 to 99).
7 
Press  (Start).
If you want to copy multiple originals using the 
platen glass, set an original and press 
 (Start) 
once for each page.
8 
Press  (Main Menu) to return to the 
Main Menu screen. 

Copying
4-11
Selecting Paper Source
1 
Set originals.
For details, see “Placing Originals,” on p. 2-4.
2 
Press  (Main Menu).
3 
Use [▼], [▲] or  (Scroll Wheel) to select 
, then press [OK].
4 
Load the paper into the stack bypass tray.
5 
Use [▼], [▲] or  (Scroll Wheel) to select 
the desired paper size, then press [OK].
You can select from the following paper sizes:
, , , , , 
, , , , 
For details, see “P
 aper Requirements,” on p. 2-7.
The available paper sizes will vary depending on 
the country...