Canon PowerShot G15 User Guide

271
Printing	Images
Still	Images
Adding Images to a Photobook
Photobooks	can	be	set	up	on	the	camera	by	choosing	up	to	998	images	on	a	memory	card	and	importing	them	into	the	included	software	on	your	computer,	where	they	are	stored	in	their	own	folder.	This	is	convenient	when	ordering	printed	photobooks	online	or	printing	photobooks	with	your	own	printer.
Choosing	a	Selection	MethodzzPress	the		button,	choose	[Photobook	Set-up]	on	the	[1]	tab,	and	then	choose	how	you	will	select	images.
•	[]	may	be...

272
Printing	Images
Still	Images
Adding	Images	Individually
1	 Choose	[Select].
zzFollowing	the	previous	procedure,	choose	[Select]	and	press	the		button.
2	 Choose	an	image.
zzPress	the		buttons	or	turn	the		dial	to	choose	an	image,	and	then	press	the		button.
XX[]	is	displayed.
zzTo	remove	the	image	from	the	photobook,	press	the		button	again.	[]	is	no	longer	displayed.
zzRepeat	this	process	to	specify	other	images.
zzWhen	finished,	press	the		button	to	return	to	the	menu	screen.
Still	Images
Adding...

273
Printing	Images
Still	Images
Removing	All	Images	from	a	Photobook
1	 Choose	[Clear	All	Selections].
zzFollowing	the	procedure	on	=		272,	choose	[Clear	All	Selections]	and	press	the		button.
2	 Confirm	clearing	the	photobook.
zzPress	the		buttons	or	turn	the		dial	to	choose	[OK],	and	then	press	the		button.  
COPY  

274
Still	ImagesMovies
Using an Eye-Fi Card
Before	using	an	Eye-Fi	card,	always	confirm	that	local	use	is	permitted	(=		2).
Inserting
	a	prepared	Eye-Fi	card	enables	automatic	wireless	transfer	of	images	to	a	computer	or	uploading	to	a	photo-sharing	website.
Images	are	transferred	by	the	Eye-Fi	card.	Refer	to	the	card’s	user	manual	or	contact	the	manufacturer	for	instructions	on	preparing	and	using	cards	or	resolving	transfer	problems.
•	 When	using	an	Eye-Fi	card,	keep	the	following	points	in	mind.
-...

275
Using	an	Eye-Fi	Card
Connection	status	of	Eye-Fi	cards	in	the	camera	can	be	checked	on	the	shooting	screen	(in	regular	information	display	mode)	or	playback	screen	(in	simple	information	display	mode).
(Gray)Not	connectedInterrupted
(Blinking	white) ConnectingNot	communicating
(White)ConnectedError	acquiring	Eye-Fi	card	information*2
(Animated)Transfer	in	progress*1
*	1		Power	saving	(=		42)	on	the	camera	is	temporarily	disabled	during	image	transfer.
*	2		Restart	the	camera.	Repeated	display	of	this...

276
Using	an	Eye-Fi	Card
Checking Connection Information
Check	the	access	point	SSID	used	by	the	Eye-Fi	card	or	the	connection	status,	as	needed.
zzPress	the		button,	choose	[Eye-Fi	Settings]	on	the	[3]	tab,	and	then	press	the		button.
zzChoose	[Connection	info],	and	then	press	the		button.
XXThe	connection	information	screen	is	displayed.
Disabling Eye-Fi Transfer
Configure	the	setting	as	follows	to	disable	Eye-Fi	transfer	by	the	card,	if	necessary.
Choose	[Disable]	in	[Eye-Fi	trans.].
zzPress	the...

277
Appendix
Helpful	information	when	using	the	camera
9
COPY  

278
Troubleshooting
If	you	think	there	is	a	problem	with	the	camera,	first	check	the	following.	If	the	items	below	do	not	solve	your	problem,	contact	a	Canon	Customer	Support	Help	Desk.
Power
Nothing	happens	when	the	power	button	is	pressed.•	Confirm	that	the	battery	is	charged	(=		17).
•	 Confirm	that	the	battery	is	inserted	facing	the	correct	way	(=		18).
•	 Confirm	that	the	memory	card/battery	cover	is	fully	closed	(=		19).
•	 Dirty	battery	terminals	reduce	battery	performance.	Try	cleaning	the...

279
Troubleshooting
No	date	stamp	is	added	to	images.•	Configure	the	[Date	Stamp]	setting	(=		67).	Note	that	date	stamps	are	not	added	to	images	automatically,	merely	because	you	have	configured	the	[Date/Time]	setting	(=		20).
•	 Date	stamps	are	not	added	in	shooting	modes	(=		298	–	299)	in	which	this	setting	cannot	be	configured	(=		67).
[h]	flashes	on	the	screen	when	the	shutter	button	is	pressed,	and	shooting	is	not	possible	(=		57).
[
]	is	displayed	when	the	shutter	button	is	pressed	halfway	(=...

280
Troubleshooting
Shots	look	too	dark	despite	the	flash	firing	(=		57).•	 Shoot	within	flash	range	(=		306).
•	 Adjust	brightness	by	using	flash	exposure	compensation	or	changing	the	flash	output	level	(=		156,	165).
•	 Increase	the	ISO	speed	(=		129).
Subjects	in	flash	shots	look	too	bright,	highlights	are	washed-out.•	Shoot	within	flash	range	(=		306).
•	 Lower	the	flash	and	set	the	flash	mode	to	[!]	(=		25,	55).
•	 Adjust	brightness	by	using	flash	exposure	compensation	or	changing	the	flash	output...