Canon Powershot Elph 340 Hs User Guide

							101
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending Images
Send images wirelessly to destinations registered on the camera as follo\
ws.
Note that when images are sent to a computer, the computer is used 
instead of the camera (=
  103).
1 Choose [Select and send].
zzPress the  buttons to 
choose [Select and send], and then press 
the  button.
2 Choose images.
zzPress the  buttons to 
choose an image to send, and then press 
the  button. [
] is displayed.
zzTo cancel selection, press the  
button again. [] is no longer displayed.
zzRepeat this process to choose additional 
images.
zzAfter you finish choosing images, press 
the  button.
3 Send the images.
zzPress the  buttons to 
choose [], and then press the  
button. Press the  buttons to 
choose the resolution (size) of images 
to send, and then press the  
button.
zzPress the  buttons to 
choose [Send], and then press the < m> 
button.
zzWhen uploading to YouTube, read the 
terms of service, choose [I Agree], and 
press the  button.
zzImage transfer will begin. The screen 
darkens during image transfer.
zzAfter images are uploaded to a Web 
service, [OK] is displayed. Press the 
 button to return to the playback 
screen.
zzAfter sending images to a camera or 
smartphone, [Transfer completed] will be 
displayed, and the display will return to 
the image transfer screen.
  
						

							102
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Adding Comments
Using the camera, you can add comments to images that you send to 
e-mail addresses, social networking services, etc. The number of characters 
and symbols that can be entered may differ depending on the Web service.
1 Access the screen for adding 
comments.
zzPress the  buttons to 
choose [], and then press the  
button.
2	 Add	a	comment	(=  23).
3 Send the image.
zzFollow the steps in “Sending Images” 
(=  101) to send the image.
•	 When a comment is not entered, the comment set in CANON iMAGE 
GATEWAY is automatically sent.
•	Keep your fingers or other objects off the Wi-Fi antenna area (=  3). 
Covering this may decrease the speed of your image transfers.
•	 Depending on the condition of the network you are using, it may take a l\
ong 
time to send movies. Be sure to keep an eye on the camera battery level.\
•	 When sending movies to smartphones, note that the supported image quality 
varies depending on the smartphone. For details, refer to the smartphone\
 user 
manual.
•	 To disconnect from the camera, press the < n> button, press the  
buttons to choose [OK] on the confirmation screen, and then press the < m> 
button. You can also use the smartphone to end the connection.
•	 Up to 50 images can be sent together at once. You can send movies together 
as long as the total playback time is within two minutes. However, Web services 
may limit the number of images or length of movies you can send. For det\
ails, 
refer to the Web service you are using.
•	 On the screen, wireless signal strength is indicated by the following ic\
ons.
[
] high, [] medium, [] low, [] weak
•	 Only images larger than the resolution you selected in step 3 will be re\
sized.
•	 Movies cannot be resized.
•	 To send only one of the displayed images, choose [Resize] on the screen i\
n 
step 1, change the size, and choose [Send this image].
•	 Sending images to Web services will take less time when resending images 
you have already sent that are still on the CANON iMAGE GATEWAY server.
  
						

							103
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
•	Movies will take longer to import since the file size is larger than still images.
•	 To disconnect from the camera, turn off the camera.
•	 You can also specify to save all images or only selected images to the 
computer, and you can change the destination folder. Refer to “Software 
Instruction Manual” ( =
  125) for details.
•	 Windows 7: If the screen in step 2 is not displayed, click the [] icon in the 
taskbar.
•	 Mac OS: If CameraWindow is not displayed, click the [CameraWindow] icon \
in the Dock.
•	 Although you can save images to a computer simply by connecting your 
camera to the computer without using the software, the following limitat\
ions 
apply.
-
 It may take a few minutes after you connect the camera to the computer u\
ntil 
camera images are accessible.
-
 Images shot in vertical orientation may be saved in horizontal orientati\
on.
- Image protection settings may be cleared from images saved to a computer\
.
- Some problems may occur when saving images or image information, 
depending on the operating system version, the software in use, or image\
 
file sizes.
-
 Some functions provided by the software may not be available, such as 
movie editing.
Saving Images to a Computer
When sending images to a computer, use the computer instead of the 
camera.
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software (\
some 
software excluded).
1 Display CameraWindow.
zzWindows: Access CameraWindow by 
clicking [Downloads Images From Canon 
Camera].
zzMac OS: CameraWindow is automatically 
displayed when a Wi-Fi connection is 
established between the camera and 
computer.
2 Import images.
zzClick [Import Images from Camera], and 
then click [Import Untransferred Images].
zzImages are now saved to the Pictures 
folder on the computer, in separate 
folders named by date.
zzClick [OK] in the screen that is displayed 
after image import is complete. For 
instructions on viewing images on a 
computer, refer to “Software Instruction 
Manual” ( =
  125).
  
						

							104
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Establish the connection.
zzConnect to the smartphone as described in 
steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (=
  94 – 95) 
or steps 4 – 6 in “Connecting without an 
Access Point” (=
  98 – 99).
zzAfter a connection is established with the 
smartphone, the smartphone nickname 
is displayed on the camera. (This screen 
will close in about one minute.)
zzYou can now use the smartphone to 
import images from the camera. (The 
camera cannot be used to send images 
to the smartphone.)
zzUse the smartphone to end the 
connection; the camera will automatically 
turn off.
zzFrom now on, you can simply press the 
 button to connect to the registered 
smartphone.
•	 When you are in the vicinity of an access point that you have 
previously connected to, the camera will automatically connect 
to it in step 2. To change access points, select [Switch Network] 
from the screen that will be displayed when the connection is 
being established, and follow steps 5 – 9 in “Connecting to WPS-
Compatible Access Points” (=
  94 – 95).
•	 All images in the camera can be viewed from the connected 
smartphone. Note that if you have assigned the < {> button, [View 
Settings] (=
  109) is not available.
•	 One smartphone can be registered to the < {> button. If you wish to register a 
different smartphone, clear the one currently registered ( =  105) first.
Using the  Button
Once you have registered a smartphone or Image Sync ( =  106) to 
the  button, you can connect to the registered destination simply by 
pressing the < {> button.
Registering a Smartphone to the < {> Button
Once you have connected to a smartphone initially via Wi-Fi by pressing \
the 
 button, you can simply press the  button after that to connect again 
for viewing and saving camera images on connected devices.
1 Press the  button.
2 Choose the destination.
zzPress the  buttons to choose [{], 
and then press the  button.
  
						

							105
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Clearing Registered Destinations
zzPress the  button, and then 
choose [Mobile Device Connect Button] 
on the [3] tab (=
  22).
zzPress the  buttons to choose 
[OK], and then press the  button.
zzAfter a confirmation message is 
displayed, press the  button.
•	Registered destinations are also cleared when you reset Wi-Fi settings 
(=  11 0 ).
Registering Image Sync to the < {> Button
By registering Image Sync to the  button, you can simply press the 
 button to send any unsent images on the memory card to a computer 
via CANON iMAGE GATEWAY. For details on Image Sync, see “Sending 
Images Automatically (Image Sync)” (=
  106).
1 Prepare the camera.
zzRegister [] as the destination (=  87).
zzInstall the software on the destination 
computer, and configure the camera 
settings (=
  91).
2 Press the  button.
3 Choose the destination.
zzPress the  buttons to choose 
[], and then press the  button.
zzThe camera will automatically reconnect 
to any previous access points and send 
the images (=
  106).
zzFrom now on, you can simply press the 
 button to send images.
  
						

							106
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
3 Choose the type of images 
to	send	(only	when	sending	movies	with	images).
zzPress the  button, and then 
choose [Wi-Fi Settings] on the [3] tab 
(=
  22).
zzPress the  buttons to choose 
[Image Sync], and then press the 
 buttons to choose [Stills/
Movies].
•	To choose a Web service as the destination, follow the steps in “Registering 
Other Web Services” (=  89) to update the camera settings.
Sending Images Automatically 
(Image Sync)
Images on the memory card that have not been transferred already can be \
sent to a computer or Web services via CANON iMAGE GATEWAY.
Note that images cannot be sent only to Web services.
Initial Preparations
Install and configure the software on the destination computer.
1 Install the software.
zzInstall the software on a computer 
connected to the Internet (=  91).
2 Register the camera.
zzWindows: In the taskbar, right-click [], 
and then click [Add new camera].
zzMac OS: In the menu bar, click [], and 
then click [Add new camera].
zzA list of cameras linked to CANON 
iMAGE GATEWAY (=  87) is displayed. 
Choose the camera from which images 
are to be sent.
zzOnce the camera is registered and the 
computer is ready to receive images, the 
icon changes to [
].
  
						

							107
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Sending Images
Images sent from the camera are automatically saved to the computer.
If the computer that you intend to send images to is turned off, the images 
will be stored temporarily on the CANON iMAGE GATEWAY server. Stored 
images are regularly erased, so make sure to turn on the computer and 
save the images.
zzFollow the steps in “Connecting to WPS-
Compatible Access Points” (=  94) to 
choose [].
zzOnce the connection is established, the 
images are sent.
zzWhen the images have been sent 
successfully to the CANON iMAGE 
GATEWAY server, [
] is displayed on 
the screen.
zzImages are automatically saved to the 
computer when you turn it on.
zzImages are automatically sent to Web 
services from the CANON iMAGE 
GATEWAY server, even if the computer 
is off.
•	 When sending images, you should use a fully charged battery pack 
or an AC adapter kit (sold separately, =
  120).
•	 Even if images were imported to the computer through a different method, any 
images not sent to the computer via CANON iMAGE GATEWAY will be sent to 
the computer.
•	 Sending is faster when the destination is a computer on the same network\
 as 
the camera, because images are sent via the access point instead of CANO\
N 
iMAGE GATEWAY. Note that images stored on the computer are sent to 
CANON iMAGE GATEWAY, so the computer must be connected to the Internet.
Geotagging Images on the Camera
GPS data recorded on a smartphone using the dedicated CameraWindow 
application ( =  89) can be added to images on the camera. Images are 
tagged with information including the latitude, longitude, and elevation\
.
•	Before shooting, make sure the date and time and your home time 
zone are set correctly. (See “Setting the Date and Time” (=
  12).) 
Additionally, in [Time Zone] (=  11 3 ), specify any shooting 
destinations that are in other time zones.
•	 The smartphone you will use for geotagging must be authorized to 
view the images on the camera ( =
  96, 99).
•	 Others may be able to locate or identify you by using location data 
in your geotagged still images or movies. Be careful when sharing 
these images with others, as when posting images online where 
many others can view them.
  
						

							108
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Shooting Remotely
As you check a shooting screen on your smartphone, you can use it to 
shoot remotely.
1 Secure the camera.
zzOnce remote shooting begins, the 
camera lens will come out. Lens motion 
from zooming may also move the camera 
out of position. Keep the camera still by 
mounting it on a tripod or taking other 
measures.
2 Connect the camera and 
smartphone	(=  85).
zzIn the privacy settings (=  96, 99), 
choose [Yes].
3 Choose remote shooting.
zzIn CameraWindow ( =  89) on the 
smartphone, choose remote shooting.
zzThe camera lens will come out. Do not 
press near the lens, and make sure no 
objects will obstruct it.
zzOnce the camera is ready for remote 
shooting, a live image from the camera 
will be displayed on the smartphone.
zzAt this time, a message is displayed on 
the camera, and all operations except 
pressing the power button are disabled.
4 Shoot.
zzUse the smartphone to shoot.
•	 The camera works in [G] mode during remote shooting. However, 
some FUNC. and MENU settings you have configured in advance 
may be changed automatically.
•	 Movie shooting is not available.
•	 In camera settings, the smartphone must be allowed to view camera 
images (=
  96, 99).
•	 Any jerky subject motion shown on the smartphone due to the connection 
environment will not affect recorded images.
•	 No AF frames are displayed. Capture a test image to check the focus.
•	 Captured images are not transferred to the smartphone. Use the smartphon\
e 
to browse and import images from the camera.
•	 Remote control is also possible from the smartphone assigned to the < {> 
button (=
  104).
  
						

							109
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Editing or Erasing Wi-Fi Settings
Edit or erase Wi-Fi settings as follows.
Editing Connection Information
1 Access the Wi-Fi menu 
(=  92).
2 Choose a device to edit.
zzPress the  buttons to 
choose the icon of the device to edit, and 
then press the  button.
3 Choose [Edit a Device].
zzPress the  buttons to choose 
[Edit a Device], and then press the  
button.
4 Choose a device to edit.
zzPress the  buttons to choose 
the device to edit, and then press the 
 button.
5 Choose an item to edit.
zzPress the  buttons to choose 
an item to edit, and then press the  
button.
zzThe items you can change depend on 
what device or service the camera will 
access.
Configurable	ItemsConnection
4 {c Web 
Services
[Change Device Nickname] ( =
  109)O O O O–
[View Settings] (=
  96, 99) –O– – –
[Erase Connection Info] (=
  11 0 )O O O O–
O : Configurable  –
 : Not configurable
Changing a Device NicknameYou can change the device nickname (display name) that is displayed on \
the camera.
zzFollowing step 5 in “Editing Connection 
Information” (=  109), choose [Change 
Device Nickname] and press the < m> 
button.
zzSelect the input field and press the < m> 
button. Use the keyboard displayed to 
enter a new nickname ( =
  23).
  
						

							11 0
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Before Use
Basic Guide
Advanced Guide
Camera Basics
Auto Mode / Hybrid 
Auto Mode
Other Shooting 
Modes
P Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Erasing Connection InformationErase connection information (information about devices that you have 
connected to) as follows.
zzFollowing step 5 in “Editing Connection 
Information” (=  109), choose [Erase 
Connection Info] and press the < m> 
button.
zzAfter [Erase?] is displayed, press the 
 buttons to choose [OK], and 
then press the  button.
zzThe connection information will be 
erased.
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the ca\
mera 
to another person, or dispose of it.
1 Choose [Wi-Fi Settings].
zzPress the  button, and then 
choose [Wi-Fi Settings] on the [3] tab 
(=
  22).
2 Choose [Reset Settings].
zzPress the  buttons to choose 
[Reset Settings], and then press the 
 button.
3 Restore the default settings.
zzPress the  buttons to choose 
[OK], and then press the  button.
zzThe Wi-Fi settings are now reset.
•	 Resetting the Wi-Fi settings will also clear all Web service settings. Be sure 
that you want to reset all Wi-Fi settings before using this option.
•	 To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the 
[3] tab (=
  11 7 ).