Canon PowerShot ELPH 330 HS User Manual

							131
1
2
3
4
5
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
6Wi-Fi Functions
Returning the Wi-Fi Settings to Default
Return the Wi-Fi settings to default if you transfer ownership of the ca\
mera 
to another person, or dispose of it.
1 Choose [Wi-Fi Settings].
zzPress the  button, and then 
choose [Wi-Fi Settings] on the [3] tab 
(=
  29).
2 Choose [Reset Settings].
zzPress the  buttons to choose 
[Reset Settings], and then press the 
 button.
3 Restore the default settings.
zzPress the  buttons to choose 
[OK], and then press the  button.
XXThe Wi-Fi settings are now reset.
•	 When returning the Wi-Fi settings to defaults, all Web services set using a 
computer will also be erased from the camera. Be sure that you want to r\
eset 
all Wi-Fi settings before using this option.  
To clear the settings completed in “Sending Images to a Computer via C\
ANON 
iMAGE GATEWAY” (=
  128), connect your camera to the computer and use 
CameraWindow to erase the connection information.
•	 To reset other settings (aside from Wi-Fi) to defaults, choose [Reset All] in the 
[3] tab.
 
COPY  
						

							132
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Setting Menu
Customize or adjust basic camera functions for greater 
convenience
7
4
Adjusting Basic Camera  Functions ............................... 133
 
COPY  
						

							133
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Adjusting Basic Camera Functions
Functions can be configured on the [ 3] tab. Customize commonly used 
functions as desired, for greater convenience ( =  29).
Silencing Camera Operations
Silence camera sounds and movies as follows.
zzChoose [Mute], and then choose [On].
•	Operation can also be silenced by holding down the < p> button as you turn 
the camera on.
•	 Sound is not played during movies if you mute camera sounds ( =
  84).  To 
restore sound during movies, press the < o> button. Adjust volume with the 
 buttons, as needed.
Adjusting the Volume
Adjust the volume of individual camera sounds as follows.
zzChoose [Volume], and then press the 
 button.
zzChoose an item, and then press the 
 buttons to adjust the volume.
Hiding Hints and Tips
Hints and tips are normally shown when you choose FUNC. menu 
(=  28) or Menu (=  29) items. If you prefer, you can deactivate this 
information.
zzChoose [Hints & Tips], and then choose 
[Off].
Date and Time
Adjust the date and time as follows.
zzChoose [Date/Time], and then press the 
 button.
zzPress the  buttons to choose 
an item, and then press the  
buttons to adjust the setting.
 
COPY  
						

							134
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
World Clock
To ensure that your shots will have the correct local date and time when you 
travel abroad, simply register the destination in advance and switch to that 
time zone. This convenient feature eliminates the need to change the Date/
Time setting manually.
Before using the world clock, be sure to set the date and time and your 
home time zone, as described in “Setting the Date and Time” (=
  14).
1 Specify your destination.
zzChoose [Time Zone], and then press the 
 button.
zzPress the  buttons to choose 
[ World], and then press the  
button.
zzPress the  buttons to choose the 
destination.
zzTo set daylight saving time (1 hour 
ahead), press the  buttons to 
choose [
].
zzPress the  button.
2 Switch to the destination time 
zone.
zzPress the  buttons to choose 
[ World], and then press the  
button.
XX[] is now shown on the shooting screen 
(=  162).
•	 Adjusting the date or time while in [] mode (=  14) will automatically 
update your [ Home] time and date.
Lens Retraction Timing
The lens is normally retracted for safety about one minute after you press 
the  button in Shooting mode ( =  26). To have the lens retracted 
immediately after you press the < 1> button, set the retraction timing to [0 
sec.].
zzChoose [Lens Retract], and then choose 
[0 sec.].
 
COPY  
						

							135
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Using Eco Mode
This function allows you to conserve battery power in Shooting mode. When 
the camera is not in use, the screen quickly darkens to reduce battery 
consumption.
1	 Configure	the	setting.
zzChoose [Eco Mode], and then choose 
[On].
XX[] is now shown on the shooting 
screen (=  162).
XXThe screen darkens when the camera 
is not used for approximately two 
seconds; approximately ten seconds 
after darkening, the screen turns off. 
The camera turns off after approximately 
three minutes of inactivity.
2 Shoot.
zzTo activate the screen and prepare for 
shooting when the screen is off but the 
lens is still out, press the shutter button 
halfway.
Power-Saving Adjustment
Adjust the timing of automatic camera and screen deactivation (Auto Power 
Down and Display Off, respectively) as needed ( =  26).
zzChoose [Power Saving], and then press 
the  button.
zzAfter choosing an item, press the 
 buttons to adjust it as needed.
•	To conserve battery power, you should normally choose [On] for 
[Auto Power Down] and [1 min.] or less for [Display Off].
•	 The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
•	 These power-saving functions are not available when you have set Eco mode 
(=
  135) to [On].
 
COPY  
						

							136
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Screen Brightness
Adjust screen brightness as follows.
zzChoose [LCD Brightness], and then 
press the  buttons to adjust the 
brightness.
•	 For maximum brightness, press and hold the < p> button for at least one 
second when the shooting screen is displayed or when in single-image display . 
(This will override the [LCD Brightness] setting on the [ 3] tab.) To restore 
the original brightness, press and hold the < p> button again for at least one 
second or restart the camera.
Hiding the Start-up Screen
If you prefer, you can deactivate display of the start-up screen normally 
shown when you turn the camera on.
zzChoose [Start-up Image], and then 
choose [Off].
Formatting Memor y Cards
Before using a new memory card or a card formatted in another device, you 
should format the card with this camera.
Formatting erases all data on a memory card. Before formatting, copy 
images on the memory card to a computer, or take other steps to back them 
up.
1 Access the [Format] screen.
zzChoose [Format], and then press the 
 button.
2 Choose [OK].
zzPress the  buttons to choose 
[Cancel], press the  buttons to 
choose [OK], and then press the  
button.
3 Format the memory card.
zzTo begin the formatting process, press 
the  buttons to choose [OK], 
and then press the  button.
zzWhen formatting is finished, [Memory 
card formatting complete] is displayed. 
Press the  button.
•	 Formatting or erasing data on a memory card only changes file 
management information on the card and does not erase the data 
completely. When transferring or disposing of memory cards, take 
steps to protect personal information if necessary, as by physically 
destroying cards.
 
COPY  
						

							137
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
•	 The total card capacity indicated on the formatting screen may be less than 
the advertised capacity.
Low-Level Formatting
Perform low-level formatting in these cases: [Memory card error] is 
displayed, the camera is not working correctly, card image reading/writing is 
slower, continuous shooting is slower, or movie recording suddenly stops. 
Low-level formatting erases all data on a memory card. Before low-level 
formatting, copy images on the memory card to a computer, or take other 
steps to back them up.
zzOn the screen in step 2 of “Formatting 
Memory Cards” (=  136), press the 
 buttons to choose [Low Level 
Format], and then press the  
buttons to select this option. A [
] icon is 
displayed.
zzFollow steps 2 – 3 in “Formatting Memory 
Cards” (=  136) to continue with the 
formatting process.
•	 Low-level formatting takes longer than “Formatting Memory Cards” ( =  136), 
because data is erased from all storage regions of the memory card.
•	 You can cancel low-level formatting in progress by choosing [Stop]. In this 
case, all data will be erased, but the memory card can be used normally .
File Numbering
Your shots are automatically numbered in sequential order (0001 – 9999) 
and saved in folders that store up to 2,000 images each. You can change 
how the camera assigns file numbers.
zzChoose [File Numbering], and then 
choose an option.
ContinuousImages are numbered 
consecutively (until the 9999th 
shot is taken/saved) even if 
you switch memory cards.
Auto Reset Image numbering is reset to 
0001 if you switch memory 
cards, or when a new folder is 
created.
•	
Regardless of the option selected in this setting, shots may be numbered 
consecutively after the last number of existing images on newly inserted 
memory cards. To start saving shots from 0001, use an empty (or formatted 
(=
  136)) memory card.
•	 Refer to the Software Guide  (=  19) for information on the card folder 
structure and image formats.
Date-Based Image Storage
Instead of saving images in folders created each month, you can have the 
camera create folders each day you shoot to store shots taken that day .
zzChoose [Create Folder], and then choose 
[Daily].
XXImages will now be saved in folders 
created on the shooting date.
 
COPY  
						

							138
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Metric/Non-Metric Display
Change the unit of measurement shown in GPS information for elevation 
(=  85) and elsewhere from m/cm to ft/in as needed.
zzChoose [Units], and then choose [ft/in].
Checking Certification Logos
Some logos for certification requirements met by the camera can be viewed 
on the screen. Other certification logos are printed in this guide, on the 
camera packaging, or on the camera body.
zzChoose [Certification Logo Display], and 
then press the  button.
Display Language
Change the display language as needed.
zzChoose [Language ], and then press 
the  button.
zzPress the  buttons to 
choose a language, and then press the 
 button.
•	 You can also access the [Language] screen in Playback mode by pressing and 
holding the < m> button and immediately pressing the < n> button.
Adjusting Other Settings
The following settings can also be adjusted on the [ 3] tab.
•	 [Video System] (=
  144)
•	 [Ctrl via HDMI] (=
  143)
•	 [Wi-Fi Settings] (=
  106)
 
COPY  
						

							139
1
2
3
4
5
6
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
7Setting Menu
Restoring Defaults
If you accidentally change a setting, you can restore default camera 
settings.
zzChoose [Reset All], and then press the 
 button.
zzPress the  buttons to choose 
[OK], and then press the  button.
XXDefault settings are now restored.
•	 The following functions are not restored to default settings.
-
 Information registered using Face ID ( =  42)
- Shooting mode ( =  55)
- Colors chosen in Color Accent (=  60) or Color Swap ( =  61)
- Movie mode ( =  67)
- Custom white balance data you have recorded ( =  72)
- Wi-Fi settings (=  106)
- [3] tab settings [Date/Time] (=  133), [Time Zone] (=  134), [Video 
System] (=  144), and [Language ] (=  138)
 
COPY  
						

							140
1
2
3
4
5
6
7
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Playback Mode
Wi-Fi Functions
Setting Menu
Appendix
Index
Basic Guide
P Mode
Cover 
Advanced Guide
8Accessories
Accessories
Enjoy the camera in more ways with optional Canon 
accessories and other compatible accessories sold 
separately
8
4
Optional Accessories .............141
Using Optional Accessories ..142
Printing Images
 ...................... 146
 
COPY