Canon PowerShot ELPH 330 HS User Manual

							91
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Image Viewing Options
Still Images
Magnifying Images
1 Magnify an image.
zzMoving the zoom lever toward < k> will 
zoom in and magnify the image. You 
can magnify images up to about 10x by 
continuing to hold the zoom lever.
zzTo zoom out, move the zoom lever 
toward . You can return to single-
image display by continuing to hold it.
2 Move the display position and 
switch images as needed.
zzTo move the display position, press the 
 buttons.
zzWhile	[] is displayed, you can switch 
to	[] by pressing the  button. 
To switch to other images while zoomed, 
press the  buttons. Press the 
 button again to restore the original 
setting.
•	 You	can	return	to	single-image	display	from	magnified	display	by	pressing	the	 button.
Approximate Position of  Displayed Area
Still ImagesMovies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each 
image is displayed for about three seconds.
Choose a slideshow transition and 
start playback.
zzPress the 	button,	choose	[.] in 
the menu, and choose the desired option 
(=
  28).
XXThe slideshow will start a few seconds 
after	[Loading	image]	is	displayed.
zzPress the  button to stop the 
slideshow.
•	 The camera’s power-saving functions ( =  26) are deactivated 
during slideshows.
•	 To pause or resume slideshows, press the < m> button.
•	 You can switch to other images during playback by pressing the < q> 
buttons. For fast-forward or fast-rewind, hold the < q> buttons down.
•	 In image search mode ( =
  88), only images matching search conditions are 
played.
 
COPY  
						

							92
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Changing Slideshow Settings
You can set up slideshows to repeat, and you can change the transitions 
between images and the display duration of each image.
1 Access the setting screen.
zzPress the  button, and then 
choose	[Slideshow]	on	the	[ 1] tab 
(=  91).
2	 Configure	the	settings.
zzChoose	a	menu	item	to	configure,	and	then choose the desired option ( =  29).
zzTo start the slideshow with your settings, 
choose	[Start]	and	press	the	 
button.
zzTo return to the menu screen, press the 
 button.
•	 [Play	Time]	cannot	be	modified	when	[Bubble]	is	chosen	in	[Effect].
Still Images
Auto Playback of  Similar Images (Smart 
Shuffle)
Based on the current image, the camera offers four images similar to it 
that you may wish to view. After you choose to view one of those images, 
the camera offers four more images. This is an enjoyable way to play back 
images in an unexpected order. Try this feature after you have taken many 
shots, in many kinds of scenes.
1	 Choose	Smart	Shuffle.
zzPress the  button, and then choose 
[] in the menu (=  28).
XXFour candidate images are displayed.
2 Choose an image.
zzPress the  buttons to 
choose the image you want to view next.
XXYour chosen image is displayed in the 
center, surrounded by the next four 
candidate images.
zzFor full-screen display of the center 
image, press the  button. To restore 
the original display, press the  
button again.
zzPress the  button to restore 
single-image display.
 
COPY  
						

							93
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
•	 Only	still	images	shot	with	this	camera	are	played	back	using	Smart	Shuffle.
•	 Smart	Shuffle	is	not	available	in	the	following	cases:
-
 There are less than 50 shots taken with this camera
- An unsupported image is currently displayed
- Images	are	shown	in	filtered	display	( =  88)
- During group playback ( =  89)
Still ImagesMovies
Protecting Images
Protect important images to prevent accidental erasure by the camera 
(=  96).
zzPress the  button, and then choose 
[:] in the menu (= 	28).	[Protected]	is displayed.
zzTo cancel protection, repeat this process 
and	choose	[:] again, and then press 
the  button.
•	 Protected images on a memory card will be erased if you format the 
card (=  136, 137).
•	 Protected images cannot be erased using the camera’s erasure function. To 
erase	them	this	way,	first	cancel	protection.
 
COPY  
						

							94
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Using the Menu
1 Access the setting screen.
zzPress the  button and choose 
[Protect]	on	the	[ 1] tab (=  29).
2 Choose a selection method.
zzChoose	a	menu	item	and	a	setting	as	desired ( =  29).
zzTo return to the menu screen, press the 
 button.
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 in “Using the Menu” 
(= 	94),	choose	[Select]	and	press	the	 button.
2 Choose an image.
zzPress the  buttons to choose an 
image, and then press the < m> button. 
[
] is displayed.
zzTo cancel selection, press the < m> 
button	again.	[] is no longer displayed.
zzRepeat	this	process	to	specify	other	images.
3 Protect the image.
zzPress the   button. A 
confirmation	message	is	displayed.
zzPress the  buttons to choose 
[OK],	and	then	press	the	 button.
•	 Images will not be protected if you switch to Shooting mode or turn 
the	camera	off	before	finishing	the	setup	process	in	step	3.
Selecting a Range
1 Choose [Select Range].
zzFollowing step 2 in “Using the Menu” 
(= 	94),	choose	[Select	Range]	and	press the  button.
2 Choose a starting image.
zzPress the  button.
zzPress the  buttons to choose an 
image, and then press the < m> button.
 
COPY  
						

							95
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
3 Choose an ending image.
zzPress the 	button	to	choose	[Last	image], and then press the < m> button.
zzPress the  buttons to choose an 
image, and then press the  button.
zzImages	before	the	first	image	cannot	be	selected as the last image.
4 Protect the images.
zzPress the  button to choose 
[Protect],	and	then	press	the	 
button.
Specifying All Images at Once
1 Choose [Select All Images].
zzFollowing step 2 in “Using the Menu” 
(= 	94),	choose	[Select	All	Images]	and	press the  button.
2 Protect the images.
zzPress the  buttons to choose 
[Protect],	and	then	press	the	 
button.
•	 To	cancel	protection	for	groups	of	images,	choose	[Unlock]	in	step	4	of	“Selecting	a	Range”	or	in	step	2	of	“Specifying	All	Images	at	Once”.
 
COPY  
						

							96
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Still ImagesMovies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when 
erasing images, because they cannot be recovered. However, protected 
images (=
  93) cannot be erased.
1 Choose an image to erase.
zzPress the  buttons to choose an 
image.
2 Erase the image.
zzPress the  button, and then choose 
[a] in the menu (=  28).
zzAfter	[Erase?]	is	displayed,	press	the		buttons	to	choose	[Erase],	and	then press the  button.
XXThe current image is now erased.
zzTo cancel erasure, press the < q> 
buttons	to	choose	[Cancel],	and	then	press the  button.
Erasing All Images
You can erase all images at once. Be careful when erasing images, 
because they cannot be recovered. However, protected images (=  93) 
cannot be erased.
Choosing a Selection Method
1 Access the setting screen.
zzPress the  button, and then 
choose	[Erase]	on	the	[1] tab (=  29).
2 Choose a selection method.
zzChoose	a	menu	item	and	a	setting	as	desired ( =  29).
zzPress the  buttons to choose 
a selection method, and then press the 
 button.
zzTo return to the menu screen, press the 
 button.
 
COPY  
						

							97
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Choosing Images Individually
1 Choose [Select].
zzFollowing	step	2	in	“Choosing	a	Selection	Method”	(see	above),	choose	[Select]	and press the  button.
2 Choose an image.
zzOnce	you	choose	an	image	following	step	2	in	“Choosing	Images	Individually”	(= 	94),	[] is displayed.
zzTo cancel selection, press the < m> 
button	again.	[] is no longer displayed.
zzRepeat	this	process	to	specify	other	images.
3 Erase the image.
zzPress the   button. A 
confirmation	message	is	displayed.
zzPress the  buttons to choose 
[OK],	and	then	press	the	 button.
Selecting a Range
1 Choose [Select Range].
zzFollowing	step	2	in	“Choosing	a	Selection	Method” (= 	96),	choose	[Select	Range]	and	press	the	< m> button.
2 Choose images.
zzFollow	steps	2	–	3	in	“Selecting	a	Range”	(=  94) to specify images.
3 Erase the images.
zzPress the 	button	to	choose	[Erase],	and then press the  button.
Specifying All Images at Once
1 Choose [Select All Images].
zzFollowing	step	2	in	“Choosing	a	Selection	Method” (= 	96),	choose	[Select	All	Images] and press the  button.
2 Erase the images.
zzPress the  buttons to choose 
[OK],	and	then	press	the	 button.
 
COPY  
						

							98
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Still ImagesMovies
Rotating Images
Change	the	orientation	of	images	and	save	them	as	follows.
1 Choose [\].
zzPress the  button, and then choose 
[\] in the menu (=  28).
2 Rotate the image.
zzPress the  or  button, depending 
on the desired direction. Each time you 
press the button, the image is rotated 
90°. Press the  button to complete 
the setting.
Using the Menu
1 Choose [Rotate].
zzPress the  button and choose 
[Rotate]	on	the	[1] tab (=  29).
2 Rotate the image.
zzPress the  buttons to choose an 
image.
zzThe image is rotated 90° each time you 
press the  button.
zzTo return to the menu screen, press the 
 button.
•	 Movies	with	an	image	quality	of	[]	or	[] cannot be rotated.
•	 Rotation	is	not	possible	when	[Auto	Rotate]	is	set	to	[Off]	(=  99).
 
COPY  
						

							99
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
Deactivating Auto Rotation
Follow these steps to deactivate automatic rotation by the camera, which\
 
rotates images shot in vertical orientation so they are displayed vertic\
ally on 
the camera.
zzPress the 	button,	choose	[Auto	Rotate]	on	the	[1] tab, and then choose 
[Off]	(=  29).
•	 Images cannot be rotated ( = 	98)	when	you	set	[Auto	Rotate]	to	[Off].	Additionally,	images	already	rotated	will	be	displayed	in	the	original orientation.
•	 In	Smart	Shuffle	(= 	92)	mode,	even	if	[Auto	Rotate]	is	set	to	[Off],	images	shot	vertically	will	be	displayed	vertically,	and	rotated	images will be displayed in the rotated orientation.
Image Categories
You can organize images by tagging them as favorites. By choosing a 
category	in	filtered	playback,	you	can	restrict	the	following	operations	to	all	of those images.
•	 Viewing ( =
  84), Viewing Slideshows ( =  91), Protecting Images 
(=  93), Erasing Images ( = 	96),	Adding	Images	to	the	Print	List	(DPOF)	(=  150), Adding Images to a Photobook ( =  153)
Still ImagesMovies
Tagging Images as Favorites
zzPress the  button, and then choose 
[] in the menu (=  28).
XX[Tagged	as	Favorite]	is	displayed.
zzTo untag the image, repeat this process 
and	choose	[] again, and then press 
the  button.
Using the Menu
1 Choose [Favorites].
zzPress the  button and choose 
[Favorites]	on	the	[1] tab (=  29).
 
COPY  
						

							100
1
2
3
4
6
7
8
9
Preliminary Notes and 
Legal Information
Contents: Basic 
OperationsCamera Basics
Auto Mode/Hybrid 
Auto Mode
Other Shooting 
Modes
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
Cover 
5
Advanced Guide
Playback Mode
2 Choose an image.
zzPress the  buttons to choose an 
image, and then press the < m> button. 
[
] is displayed.
zzTo untag the image, press the < m> 
button	again.	[] is no longer displayed.
zzRepeat	this	process	to	choose	additional	images.
3 Finish the setup process.
zzPress the   button. A 
confirmation	message	is	displayed.
zzPress the  buttons to choose 
[OK],	and	then	press	the	 button.
•	 Images will not be tagged as favorites if you switch to Shooting 
mode	or	turn	the	camera	off	before	finishing	the	setup	process	in	step 3.
•	 Favorite images will have a three-star rating () when transferred 
to computers running Windows 8, Windows 7 or Windows Vista. (Does not 
apply to movies.)
Editing Still Images
•	 Image editing ( =  100 – 103) is only available when the memory 
card	has	sufficient	free	space.
Still Images
Resizing Images
Save a copy of images at a lower resolution.
1 Choose [Resize].
zzPress the  button and choose 
[Resize]	on	the	[1] tab (=  29).
2 Choose an image.
zzPress the  buttons to choose an 
image, and then press the < m> button.
3 Choose an image size.
zzPress the  buttons to choose the 
size, and then press the  button.
XX[Save	new	image?]	is	displayed.
 
COPY