Canon Powershot Elph 160 User Guide

61
Still ImagesMovies
Viewing
After shooting images or movies, you can view them on the screen as 
follows.
1 Enter Playback mode.
zzPress the  button.
zzYour last shot is displayed.
2 Browse through your images.
zzTo view the previous image, press the 
 button. To view the next image, 
press the  button.
zzPress and hold the  buttons to 
browse through images quickly.
zzMovies are identified by a [] icon. To 
play movies, go to step 3.
3 Play movies.
zzTo start playback, press the  button, 
press the...

62
Still ImagesMovies
Switching Display Modes
Press the  button to view other information on the screen, or to hide 
the information. For details on the information displayed, see “Playb\
ack 
(Detailed Information Display)” (=
  103).
No Information 
Display Simple 
Information  Display Detailed 
Information  Display
Still ImagesMovies
Overexposure Warning (for Image Highlights)Washed-out highlights in the image flash on the screen in detailed 
information display ( =  62).
Still ImagesMovies
Histogram...

63
Still ImagesMovies
Finding Images Matching Specified 
Conditions
Find desired images quickly on a memory card full of images by filtering 
image display according to your specified conditions. You can also protect 
(=
  65) or delete (=  67) these images all at once.
Shot DateDisplays the images shot on a specific date.
Still image/MovieDisplays only still images or movies.
1 Choose the first condition for 
image display or navigation.
zzPress the  button, choose 
[] in the menu, and choose a...

64
Still ImagesMovies
Viewing Slideshows
Automatically play back images from a memory card as follows. Each 
image is displayed for about three seconds.
zzPress the  button, choose [.] in 
the menu, and choose the desired option 
(=
  21).
zzThe slideshow will start after [Loading 
image] is displayed for a few seconds.
zzPress the  button to stop the 
slideshow.
•
 The camera’s power-saving functions ( =  19) are deactivated 
during slideshows.
• To pause or resume slideshows, press the < m> button.
•...

65
Changing Slideshow SettingsYou can set up slideshows to repeat, and you can change the transitions 
between images and the display duration of each image.
1 Access the setting screen.
zzPress the  button, and then 
choose [Slideshow] on the [1] tab 
(=
  22).
2 Configure the settings.
zzChoose a menu item to configure, and 
then choose the desired option ( =  22).
zzTo start the slideshow with your settings, 
choose [Start] and press the  
button.
zzTo return to the menu screen, press the 
 button....

66
Using the Menu
1 Access the setting screen.
zzPress the  button and choose 
[Protect] on the [1] tab (=  22).
2 Choose a selection method.
zzChoose a menu item and an option as 
desired (=  22).
zzTo return to the menu screen, press the 
 button.
Choosing Images Individually
1 Choose [Select].
zzFollowing step 2 in “Using the Menu” 
(=  66), choose [Select] and press the 
 button.
2 Choose an image.
zzPress the  buttons to choose an 
image, and then press the < m> button. 
[
] is displayed.
zzTo...

67
Still ImagesMovies
Erasing Images
You can choose and erase unneeded images one by one. Be careful when 
erasing images, because they cannot be recovered. However, protected 
images (=
  65) cannot be erased.
1 Choose an image to erase.
zzPress the  buttons to choose an 
image.
2 Erase the image.
zzPress the  button.
zzAfter [Erase?] is displayed, press the 
 buttons to choose [Erase], and 
then press the  button.
zzThe current image is now erased.
zzTo cancel erasure, press the  
buttons to choose...

68
2 Choose an image.
zzOnce you choose an image following 
step 2 in “Choosing Images Individually” 
(=
  66), [] is displayed.
zzTo cancel selection, press the  
button again. [] is no longer displayed.
zzRepeat this process to specify other 
images.
3 Erase the image.
zzPress the  button. A confirmation 
message is displayed.
zzPress the  buttons to choose 
[OK], and then press the  button.
Specifying All Images at Once1 Choose [Select All Images].
zzFollowing step 2 in “Choosing a Selection 
Method”...

69
2 Rotate the image.
zzPress the  buttons to choose an 
image.
zzThe image is rotated 90° each time you 
press the  button.
zzTo return to the menu screen, press the 
 button.
•
 Rotation is not possible when [Auto Rotate] is set to [Off] (=  69).
Deactivating Auto Rotation
Follow these steps to deactivate automatic image rotation, which rotates\
 
images based on the current camera orientation.
zzPress the  button, choose [Auto 
Rotate] on the [1] tab, and then choose 
[Off] (=
  22).
•
 Images cannot...

70
5 Review the new image.
zzPress the  button. [Display new 
image?] is displayed.
zzPress the  buttons to choose 
[Yes], and then press the  button.
zzThe saved image is now displayed.
•
 Editing is not possible for images shot at a resolution of [] or [] 
(=  35).
• Images cannot be resized to a higher resolution.
Still Images
Correcting Image Brightness (i-Contrast)
Excessively dark image areas (such as faces or backgrounds) can be 
detected and automatically adjusted to the optimal brightness....