Canon Pixma Mx922 User Guide

							4.Adjust the amount of extension from the paperIf necessary, adjust the amount of extension using the  Amount of Extension slider.
Moving the slider to the right increases the amount extending off the paper, and moving the slider to the left decreases the amount.It is recommended to set the slider at the second position from the right for most cases.
Important
 When the  Amount of Extension  slider is set to the rightmost position, the back side of the
paper may become smudged.
5.
Complete the setup
Click  OK.
When you execute print, the data is printed without any margins on the paper.
Important
 When a page size that cannot be used for borderless printing is selected, the size is automatically
changed to the valid page sizes for borderless printing.
 When  Borderless  is selected, the  Printer Paper Size , Duplex Printing , Stapling Side  settings, and
the  Stamp/Background...  (Stamp... ) button on the  Page Setup tab appear grayed out and are
unavailable.
 When  Envelope , High Resolution Paper , or T-Shirt Transfers  is selected from the  Media Type list
on the  Main tab, you cannot perform borderless printing.
 Depending on the type of the media used during borderless printing, the print quality may deteriorate
at the top and bottom of the sheet or stains may form.
 When the ratio of the height to the width differs from the image data, a portion of the image may not
be printed depending on the size of the media used. In this case, crop the image data with an application software according to the paper size.
Note
 When  Plain Paper  is selected for  Media Type on the Main tab, borderless printing is not
recommended. Therefore, the message for media selection appears. When you are using plain paper for test printing, select  Plain Paper, and click OK.
Expanding the Range of the Document to Print Setting a large amount of extension allows you to perform borderless printing with no problems. However,the portion of the document extending off the paper range will not be printed and for this reason, the
subjects around the perimeter of a photo may not be printed.
Try borderless printing once. When you are not satisfied with the result of borderless printing, reduce theamount of extension. The extension amount decreases as the  Amount of Extension slider is moved to the
left.
Important
 When the amount of extension is decreased, an unexpected margin may be produced on the print,
depending on the size of the paper.
Note
 When the  Amount of Extension  slider is set to the leftmost position, image data will be printed in
the full size. If you set this when printing the address side of a postcard, the postal code of the sender is printed in the correct position.
 When  Preview before printing  is checked on the Main tab, you can confirm whether there will be
no border before printing.
 
						

							Fit-to-Page Printing
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to beused is as follows:
1.
Open the  printer driver setup window
2.
Set fit-to-page printing
Select  Fit-to-Page  from the Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the machine from the  Printer Paper Size list.
When the  Printer Paper Size  is smaller than the  Page Size, the page image will be reduced. When
the  Printer Paper Size  is larger than the Page Size, the page image will be enlarged.
The current settings are displayed in the settings preview on the left side of the printer driver.
 
						

							5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
 
						

							Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printing
Select  Scaled  from the  Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:
•
Select a Printer Paper Size
When the printer paper size is smaller than the  Page Size, the page image will be reduced. When
the printer paper size is larger than the  Page Size, the page image will be enlarged.
 
						

							•
Specify a scaling factor
Directly type in a value into the  Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
Click  OK.
When you execute print, the document will be printed with the specified scale.
Important
 When the application software which you used to create the original has the scaled printing function,
configure the settings on your application software. You do not need to configure the same setting in
the printer driver.
Note
 Selecting  Scaled changes the printable area of the document.
 
						

							Page Layout Printing
The page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the  printer driver setup window
2.
Set page layout printing
Select  Page Layout  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the machine from the  Printer Paper Size list.
Setting the layout of two pages of the document from left to right is complete.
4.
Set the number of pages to be printed on one sheet and the page order
If necessary, click  Specify..., specify the following settings in the  Page Layout Printing dialog box,
and click  OK.
 
						

							Pages
To change the number of pages to be printed on a single sheet of paper, select the number of pages
from the list.
Page Order
To change the page arrangement order, select a placement method from the list.
Page Border
To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
 
						

							Tiling/Poster Printing
The tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print these pages on separate sheets of paper. You can also paste the pages together to create a large print like a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the  printer driver setup window
2.
Set tiling/poster printing
Select  Tiling/Poster  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the machine from the  Printer Paper Size list.
This completes the setup for dividing the document into 2 and performing tiling/poster printing.
4.
Set the number of image divisions and the pages to be printed
 
						

							If necessary, click Specify..., specify the following settings in the  Tiling/Poster Printing dialog box,
and then click  OK.
Image Divisions
Select the number of divisions (vertical x horizontal). As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing
the number of divisions allow you to create a larger poster.
Print Cut/Paste in marginsTo leave out words Cut and Paste, uncheck this check box.
Note
 This feature may be unavailable when certain printer drivers or operating environments are
used.
Print Cut/Paste lines in margins
To leave out cut lines, uncheck this check box.
Print page range
Specifies the printing range. Select  All under normal circumstances.
To reprint only a specific page, select  Pages and enter the page number you want to print. To specify
multiple pages, enter the page numbers by separating them with commas or by entering a hyphen
between the page numbers.
Note
 You can also specify the print range by clicking the pages in the settings preview.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the document will be divided into several pages during printing.
Printing Only Specific Pages
If ink becomes faint or runs out during printing, you can reprint only the specific pages by following the procedure below:
1.
Set the print range
In the settings preview on the left of the  Page Setup tab, click the pages that do not need to be
printed.
The pages that were clicked are deleted, and only the pages to be printed are displayed.
 
						

							Note
 Click the deleted pages to display them again.
 Right-click the settings preview to select Print all pages or Delete all pages .
2.
Complete the setup
After completing the page selection, click  OK.
When you execute print, only specified pages will be printed.
Important
 Since tiling/poster printing enlarges the document when printing it, the print results may become
coarse.