Canon Pixma Mx7600 Quick Start Guide

7 Before Using the Machine
Operation Panel
(1) ON/OFF button
Turns the machine on and off. Before turning on the machine, make sure the Document 
Cover is closed.
(2) COPY button
Switches the machine to copy mode. Flashes when you turn on the machine.
(3) FAX button
Switches the machine to fax mode.
(4) SCAN button
Switches the machine to scan mode. In scan mode, the machine scans a document to 
your computer according to the settings selected. To use this button, the machine must 
be connected to a...

8Before Using the Machine
(12) Redial/Pause button
Redials the last number called using the Numeric buttons. Also enters pauses between 
or after numbers when dialing or registering numbers.
(13) Coded Dial button
Press this button and a two-digit code to display a pre-registered fax/telephone number 
or group.
(14) Stop/Reset button
Cancels operations such as copying, scanning, or faxing, or a print job in progress.
(15) Black button (top) / Color button (bottom)
Press the Black button to start black &...

9
Before Using the Machine
How to Navigate Menus on the LCD
You can make good use of the various functions of the machine with the menu screen and the 
settings screen on the LCD.
This section describes how to use the menu screen and the settings screen.
(1) COPY button
(2) FAX button
(3) SCAN button
(4) MEMORY CARD button
(5) LCD (Liquid Crystal Display)
(6) Menu button
(7) Settings button
(8){ }  [  ]  buttons
(9) OK button
(10) Back button
„ Basic Operation on the Menu Screen
You can perform various...

10Before Using the Machine
 Copy mode
Copy menu screen
Standard copy (page 32)
Special copy (page 35)
Two-sided copy
2-on-1 copy
4-on-1 copy
Borderless copy
Image repeat
Collated copy
Fade-restored copy
Frame erase
Maintenance/settings (page 11)
 Fax mode
FAX menu screen
Receive mode settings (page 87)
FAX priority mode
FAX only mode
DRPD*
TEL priority mode
Memory reference (page 95)
Print memory list
Print specified document
Delete specified doc.
Print reports/lists (page 99)
Activity report
Telephone...

11
Before Using the Machine
 Maintenance/settings
Maintenance screen
Nozzle check (page 114)
Cleaning (page 116)
Deep cleaning (page 117)
Ink quality maintenance (page 122)
Sheet cleaning (page 128)
Auto head align (page 118)
Manual head align (page 119)
Head alignment print (page 118)
Roller cleaning (page 125)
Bottom plate cleaning (page 126)
Device settings screen
FAX settings*
User settings
TX settings
RX settings
Print settings*
Prevent paper abrasion
Extended copy amount
Two-sided output setting...

12Before Using the Machine
„Basic Operation on the Settings Screen
You can change the print settings such as page  size, media type, etc. on the settings screen 
either in the copy mode, in the memory card m ode, in the fax mode, or when printing directly 
from a PictBridge compliant device.
This section describes the procedure to change the  settings, taking the steps to specify the page 
size for the memory card mode to  4 x 6 (101 x 152) as an example.
1Display the settings screen.
(1)Press the...

13
Before Using the Machine
4Change the setting.
(1) Use the  [ or  ] button to change the setting.
Example: Change to  4 x 6 (101 x 152) here.
5Complete setting.
(1)Press the  Settings button.
The LCD returns to the previous screen.
Note
For details on the setting Items
z For the settings in the copy mode, see “Setting Items” on page 33.
z For the settings in the memory card mode, see “Setting Items” on page 41.
z For the settings in the fax mode, see “Changing the Print Settings” on page 93.
You can...

14Before Using the Machine
Turning the Machine On and Off
Turn on the machine before printing.
„Turning on the Machine
1Press the  ON/OFF button to turn on the 
machine.
The  COPY  button flashes and then remains lit 
green.
2If you are using the machine connected to a 
computer, turn on your computer.
„ Turning off the Machine
1To turn off the machine, press the  ON/OFF 
button.
When a selected mode button (e.g.,  COPY button) 
stops flashing, the machine is turned off after all the 
lamps on the...

15 Before Using the Machine
zScreen-saver Mode
The LCD goes out if the machine is not operated for about five minutes*.
* You cannot change the wait time before the LCD goes out.
Note
When you want to restore the display, perform any operation such as copying, faxing, or scanning, 
or press any button except for the ON/OFF button. When you press the ON/OFF button while the 
machine is in Screen-saver mode, the machine turns off.
 

16Before Using the Machine
Handling the Original Document
This section describes how to load the original document on the Platen Glass or in the ADF.
„Original Document Requirements
The original documents you load on the Platen Glass or in the ADF for copying, scanning, or 
faxing must meet these requirements:
„Loading Original Documents
Load originals to copy, scan, or fax on the Platen Glass or in the ADF.
Platen GlassADF
Document type
zPaper documents
zPhotographs
zBooks
zDocuments that are not...