Canon Pixma Mx492 User Guide

Loading Documents in the ADF (Auto Document Feeder)
Note
•
To scan a document at optimum quality, load it on the platen glass.
1.
Make sure that any original has been removed from the platen glass.
2.
Open the document tray.
3.
Insert the document in the document tray until you hear a beep sound.
Load the document WITH THE SIDE TO SCAN FACING UP in the document tray.
Originals You Can Load
Note
•
When you set the alarm to be silent in  Sound control of Dev. user settings , the alarm will not
beep even if...

How to Load Originals for Each FunctionLoad the original in the correct position according to the function to use. If you do not load the original
correctly, it may not be scanned properly.
Loading the Original to Be Aligned with the alignment mark •
Load originals to copy or fax
•
In the scan mode,
◦
select  Auto scan  for Document type  to scan text documents, magazines, or newspapers
◦
select Document  or Photo  for Document type  and specify a standard size (A4, Letter, etc.) for
Scan size  to scan...

◦select Photo for Document type  and specify Auto scan(A) -Singl  for Scan size  to scan one
original•
Scan one printed photo, postcard, business card, or disc with a software application on a computer
Place the original WITH THE SIDE TO SCAN FACING DOWN, with 0.4 inch (1 cm) or more space between the edges (diagonally striped area) of the platen glass. Portions placed on the diagonally striped
area cannot be scanned.
Loading Two or More Originals on the platen glass
•
In the scan mode,
◦
select  Auto...

Originals You Can Loadplaten glassItemDetailsTypes of originals- Text document, magazine, or newspaper
- Printed photo, postcard, business card, or disc (BD/DVD/CD, etc.)
- Documents that are not suitable for the ADFSize (width x height)Max. 8.5 x 11.7 inches (216 x 297 mm)Quantity1 sheet or multiple sheets*ThicknessMax. 0.20 inch (5 mm)
* Two or more originals can be loaded on the platen glass depending on the selected function.
How to Load Originals for Each Function
ADF (Auto Document Feeder)...

•Photo or thick paper
155
 

Replacing a FINE Cartridge
Replacing a FINE Cartridge
Checking the Ink Status
156
 

Replacing a FINE CartridgeWhen remaining ink cautions or errors occur, the message will appear on the LCD to inform you of the error.
Take appropriate action according to the message.
A Message Is Displayed
Note
•
For precautionary notes on handling FINE cartridges, see Notes on FINE cartridges .
Replacing Procedure When you need to replace a FINE cartridge, follow the procedure below.
1.
Make sure that the power is turned on.
2.
Open the front cover (A).
The paper output tray (B) opens.
Note
•
Remove...

Caution•
Do not hold the FINE cartridge holder to stop or move it forcibly. Do not touch the FINEcartridge holder until it stops completely.
Important
•
The inside of the machine may be stained with ink. Be careful not to stain your hands orclothing when replacing the FINE cartridge. You can easily wipe off the ink from the inside of
the machine with tissue paper or the like.
•
Do not touch the metallic parts or other parts inside the machine.
•
If the paper output cover is left open for more than 10...

•Discard the empty FINE cartridge according to the local laws and regulations regarding disposalof consumables.6.
Take a new FINE cartridge out of its package and remove the protective tape (D) gently.
Important
•
If you shake a FINE cartridge, ink may spill out and stain your hands and the surrounding area.
Handle a FINE cartridge carefully.
•
Be careful not to stain your hands and the surrounding area with ink on the removed protectivetape.
•
Do not reattach the protective tape once you have removed...

Important•
Insert the FINE cartridge gently so that it does not hit the electrical contacts on the FINE
cartridge holder.
8.
Push the FINE cartridge in and up firmly until it snaps into place.
You hear an electronic sound once.
160