Canon Pixma Mx300 Quick Start Guide

							97 Appendix
Reading the On-screen Manuals
For detailed instructions on installing the on-screen manuals, refer to your setup sheet.
You can view the on-screen manuals in the following way:
To view the on-screen manual, double-click the XXX On-screen Manual shortcut icon on the 
desktop, or click Start > All Programs (or Programs) > Canon XXX Manual > XXX On-screen 
Manual (where “XXX” is your machine’s name).
System Requirements
Browser: Windows HTML Help Viewer
To view the on-screen manual, double-click the XXX On-screen Manual alias (where “XXX” is your 
machine’s name) on the desktop.
System Requirements
Browser: Help Viewer
NotezMicrosoft® Internet Explorer 5.0 or later must be installed.
zThe on-screen manual may not be displayed properly depending on your operating system or 
Internet Explorer version. We recommend that you keep your system up to date with Windows 
Update.
Note
zThe on-screen manual may not be displayed properly depending on your operating system. We 
recommend that you keep your system up to date.
zWe recommend using Safari as your Web browser to view the HTML format on-screen 
manuals. If Safari is not installed on your computer, download it from Apple Inc. website and 
install it.
 
						

							98Appendix
Specifications
General Specifications
Printing resolution (dpi)4800 (horizontal)* x 1200 (vertical)
* Ink droplets can be placed with a pitch of 1/4800 inch at minimum.
InterfaceUSB 2.0 High Speed*
* A computer that complies with USB 2.0 Hi-Speed standard is required. Since the 
USB 2.0 Hi-Speed interface is fully upwardly compatible with USB Full-Speed (USB 
1.1), it can be used at USB Full-Speed (USB 1.1).
Print width8 inches / 203.2 mm max.
(for Borderless Printing: 8.5 inches / 216 mm)
Acoustic noise levelApprox. 39.5 dB (A)
* When printing in the highest print quality mode on Photo Paper Pro.
Operating environmentTemperature: 5 to 35°C (41 to 95°F)
Humidity: 10 to 90% RH (no condensation)
Storage environmentTemperature: 0 to 40°C (32 to 104°F)
Humidity: 5 to 95% RH (no condensation)
Power supplyAC 100-240 V, 50/60 Hz
Power consumptionPrinting (Copy): Approx. 13 W
Standby (minimum): Approx. 1.7 W
OFF: Approx. 1.0 W
External dimensionsApprox. 18.4 (W) x 17.3 (D) x 6.9 (H) inches /
Approx. 465 (W) x 440 (D) x 174 (H) mm
* With the Paper Support and Paper Output Tray retracted.
WeightApprox. 7.0 kg (Approx. 15.5 lb.)
* With the FINE Cartridges installed.
Canon FINE CartridgesNozzles:
Black: 320 nozzles
Cyan/Magenta/Yellow: 384 x 3 nozzles
Copy Specifications
Multiple copy1 - 99 pages
Intensity adjustment9 positions, Auto intensity (AE copy)
Zoom25% - 400% (1% unit)
Scan Specifications
Scanner driverTWAIN / WIA (Windows Vista and Windows XP only)
Maximum scanning sizeA4/Letter, 8.5 x 11.7 / 216 x 297 mm
Scanning resolutionOptical resolution (horizontal x vertical) max: 600 dpi x 1200 dpi
Interpolated resolution max: 19200 dpi x 19200 dpi
Gradation (Input/Output)16bit/8bit
48bit/24bit (RGB each 16bit/8bit)
 
						

							99 Appendix
Fax Specifications
Applicable linePublic Switched Telephone Network (PSTN)
CompatibilityG3 / Super G3 (Mono & Color Fax)
Data compressing systemMH, MR, MMR, JPEG
Modem typeFax modem
Modem speed33600 / 31200 / 28800 / 26400 / 24000 / 21600 / 19200 / 16800 / 14400 / 12000 / 9600 
/ 7200 / 4800 / 2400 bps
Automatic fallback
Transmission speedBlack & white: Approx. 3 seconds/page at 33.6 Kbps, ECM-MMR, transmitting from 
memory 
(Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 
for others, both in standard mode or Canon FAX Standard chart No.1, standard mode.)
Color: Approx. 1 minute/page at 33.6 Kbps, ECM-JPEG, transmitting from memory 
(Based on Canon COLOR FAX TEST SHEET.)
Scanning image processingHalftones: 256 levels of gray
Density adjustment: 3 levels
MemoryTransmission/reception: 50 pages
(Based on ITU-T No.1 chart for US specifications and Canon FAX Standard chart No.1 
for others, both in standard mode.)
Fax resolutionBlack & white STANDARD: 8 pels / mm x 3.85 lines / mm (203 pels / inch x 98 lines / 
inch)
Black & white FINE, PHOTO: 8 pels / mm x 7.70 lines / mm (203 pels / inch x 196 lines 
/ inch)
Color: 200 x 200 dpi
DialingAutomatic dialing
Coded speed dialing (20 destinations)
Regular dialing (with numeric buttons)
Automatic redialing
Manual redialing (with the Redial/Pause button)
Telephone NetworkingAutomatic reception
Automatic fax/tel switchover
DRPD (Distinctive Ring Pattern Detection)
Remote reception by telephone (Default ID: 25)
ECM deactivation
Activity report (after every 20 transactions)
Non-delivery report
TTI (Transmit Terminal Identification)
Telephone Specifications
ConnectionTelephone/answering machine (CNG detecting signal)/data modem
 
						

							100Appendix
Camera Direct Print (PictBridge)
Paper size4 x 6 / 101.6 x 152.4 mm, 5 x 7 / 127.0 x 177.8 mm*, Credit card, 8 x 10 / 203.2 x 
254.0 mm, A4, Letter, Wide*
* Can be selected only on certain Canon-brand PictBridge compliant devices.
Paper typeDefault (Selections based on the machine setting), Photo (Photo Paper Plus Glossy, 
Glossy Photo Paper, Glossy Photo Paper “Everyday Use”, Photo Paper Glossy, Photo 
Paper Plus Semi-gloss, Photo Stickers), Fast Photo (Photo Paper Pro), Plain Paper 
(A4/Letter only)
LayoutDefault (Selections based on the machine setting), Borderless, Bordered, N-up (2, 4, 
9, 16)
*1, 35-up*2
*1
Layout compatible with Canon-brand sticker above. Refer to “Printing Media” in the 
User’s Guide on-screen manual.
*2Selected photos are printed in 35 mm film style layout (contact printing layout).
This print setting is only available with certain Canon-brand PictBridge compliant 
devices.
You can print shooting Info (Exif Data) on photos in list format, or in the margins of 
specified photos.
Select Layout, then select the item displayed with the [i] icon.
(Note that this print setting cannot be used for some models.)
Image optimizeDefault (Selections based on the machine setting), On, Off, “VIVID”*, “NR” (Noise 
Reduction)*, “Face”*, “Red eye”*
* If using a Canon PictBridge compliant camera, you can select it.
Print data & file no.Default (Off: No printing), Date, File No., Both, Off
TrimmingDefault (Off: No trimming), On (follow camera’s setting), Off
 
						

							101 Appendix
zOmniPage SE: Windows 2000 Professional SP2 and SP3 not supported
zMP Navigator EX: QuickTime v6.4 or later is needed (Macintosh only)
zSome functions may not be available with Windows Media Center
zTo upgrade from Windows XP to Windows Vista, first uninstall software bundled with the Canon 
inkjet printer.
Specifications are subject to change without notice.
Minimum System Requirements
Note
Conform to the operating system’s requirements when higher than those given here.
Operating System
Processor
RAMWindows Vista
Pentium II (including compatible processors)
300 MHz
128 MB
Windows XP SP1, SP2
Pentium II (including compatible processors)
300 MHz
128 MB
Windows 2000 Professional SP2, SP3, SP4
Pentium II (including compatible processors)
300 MHz
128 MB
Note: Operation can only be guaranteed on a PC pre-
installed Windows Vista, XP or 2000.Mac OS X v.10.4
Intel processor
PowerPC G3
256 MB
Mac OS X v.10.2.8 - v.10.3
PowerPC G3
128 MB
Note: Hard disk must be formatted 
as Mac OS Extended (Journaled) or 
Mac OS Extended.
BrowserInternet Explorer 6.0- Safari
Hard Disk Space800 MB
Note: For bundled software installation.450 MB
Note: For bundled software 
installation.
CD-ROM DriveRequired
Other restrictionsXGA 1024 x 768
Additional System Requirements for On-Screen Manuals
Browser: Windows HTML Help Viewer
Note: Microsoft Internet Explorer 5.0 or later must be 
installed. The on-screen manual may not be displayed 
properly depending on your operating system or Internet 
Explorer version. We recommend that you keep your 
system up to date with Windows Update. Browser: Help Viewer
Note: The on-screen manual may not be displayed properly 
depending on your operating system or Help Viewer 
version. We recommend that you keep your system up to 
date with Software Update.
 
						

							102Safety Precautions
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use the 
machine safely. Do not attempt to use the machine in any way not described in this manual.
Warning
zThis product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities, 
please move away from this product and consult your doctor.
zYou may cause an electric shock, fire, or damage the machine if you ignore any of these safety 
precautions.
Choosing a locationDo not place the machine close to flammable solvents such as alcohol or thinners.
Power supplyNever attempt to plug in or unplug the machine from the power supply when your hands are wet.
Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist 
the power cord. Do not place heavy objects on the power 
cord.
Never plug the machine into a power socket that is shared 
with other equipment (extension lead/cord, 2- or 3-way 
adapter, etc.).
Never use the machine if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange noises around the machine, immediately unplug 
the machine at the power supply and call for service.
Periodically, unplug the machine and use a dry cloth to wipe 
off any dust or dirt collected on the plug and the power outlet. 
If the machine is placed at a location exposed to a lot of dust, 
smoke, or high humidity, the dust collected on the plug 
absorbs moisture and may cause insulation failure and fire.
If you hear thunder, disconnect the power supply of the machine and refrain from using it. Leaving 
the machine plugged in may cause fire, electric shock, or damage to the machine, depending on 
the thunder storm.
Use the power cable included with the machine.
 
						

							103 Safety Precautions
Cleaning the machineUse a damp cloth to clean the machine. Never use 
flammable solvents such as alcohol, benzene or thinners.
If flammable solvents come in contact with electrical 
components inside the machine, it could cause a fire or 
electric shock.
Always unplug the machine from the power outlet before cleaning the machine.
If you accidentally switch the machine on while cleaning it, you could injure yourself or damage 
the machine.
Maintaining the 
machineDo not attempt to disassemble or modify the machine. There are no user serviceable parts inside 
the machine.
The machine contains high-voltage components. Never attempt any maintenance procedure not 
described in this guide.
Working around the 
machineDo not use highly flammable sprays near the machine.
This could cause a fire or electric shock if the spray comes into contact with electrical components 
inside the machine.
Caution
You may cause injury or damage the machine if you ignore any of these safety precautions.
Choosing a locationDo not install the machine in a location that is unstable or subject to excessive vibration.
Do not install the machine in locations that are very humid or dusty, in direct sunlight, outdoors, or 
close to a heating source.
To avoid the risk of fire or electric shocks, install the machine in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation 
free).
Do not place the machine on a thick rug or carpet.
Do not place the machine with its back attached to the wall.
Power supplyEnsure that the area around the power outlet is kept clear at 
all times so you can easily unplug the power cord if 
necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/cord.
 
						

							104Safety Precautions
Working around the 
machineNever put your hands or fingers in the machine while it is printing.
When moving the machine, carry the machine at both ends.
Do not place any object on the machine.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents 
(alcohol, thinners, etc.) on top of the machine.
If any foreign object (metal or liquid) fall into the machine, unplug the power cord and call for 
service.
Do not transport or store the machine on a slant, vertically or upside-down, as the ink may leak 
and damage the machine.
When loading a thick book on the Platen Glass, do not press hard on the Document Cover. The 
Platen Glass may break and cause injury.
FINE Cartridges (Ink 
Cartridges)For safety reasons, store FINE Cartridges (Ink Cartridges) out of the reach of small children.
If a child ingests any ink, consult a doctor immediately.
Do not shake FINE Cartridges (Ink Cartridges).
Ink may spill out and stain clothing or the surrounding area.
Never touch the electrical contacts or Print Head Nozzles on 
a FINE Cartridge (Ink Cartridge) after printing. The metal 
parts may be very hot and could cause burns.
Do not throw FINE Cartridges (Ink Cartridges) into fire.
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should always be followed to reduce 
the risk of fire, electric shock and injury to persons, including the following:
1. Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink or 
laundry tub, in a wet basement or near a swimming pool.
2. Avoid using this product during an electrical storm. There may be a remote risk of electric 
shock from lightning.
3. Do not use this product to report a gas leak in the vicinity of the leak.
SAVE THESE INSTRUCTIONS
 
						

							105 Safety Precautions
Legal Limitations on Use of Your Product and Use of 
Images
It may be unlawful to make copies of, scan, print, or use reproductions of the following documents. 
The list provided is non-exhaustive. When in doubt, check with a legal representative in your 
jurisdiction.
zPaper money
zMoney orders
zCertificates of deposit
zPostage stamps (canceled or uncanceled)
zIdentifying badges or insignias
zSelective service or draft papers
zChecks or drafts issued by governmental 
agencies
zMotor vehicle licenses and certificates of title
zTraveler’s checks
zFood stamps
zPassports
zImmigration papers
zInternal revenue stamps (canceled or uncanceled)
zBonds or other certificates of indebtedness
zStock certificates
zCopyrighted works/works of art without 
permission of copyright owner
 
						

							106Safety Precautions
Users in the U.S.A.
„Pre-Installation Requirements for MX300
Order Information
When ordering service from the telephone company for this equipment, the following may be 
required.
Universal Service Order Code (USOC): RJ11C
The Facility Interface Code (FIC): 02LS2
Service Order Code (SOC): 9.0F
„Connection of the Equipment
This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.
On the bottom of this equipment is a label that contains, among other information, a product identifier 
in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the telephone 
company.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming 
call. In most but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the 
number of devices that may be connected to a line, as determined by the total RENs, contact the 
local telephone company. The REN for this product is part of the product identifier that has the format 
US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is 
a REN of 0.3).
A plug and jack used to connect this equipment to the premises wiring and telephone network must 
comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant 
telephone cord and modular plug is provided with this product. It is designed to be connected to a 
compatible modular jack that is also compliant. See installation instructions for details.
Connection to party lines is subjected to state tariffs. Contact the state public utility commission, 
public service commission or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure the 
installation of this equipment does not disable your alarm equipment. If you have questions about 
what will disable alarm equipment, consult your telephone company or a qualified installer.
„In Case of Equipment Malfunction
Should any malfunction occur which cannot be corrected by the procedures described in this guide, 
disconnect the equipment from the telephone line cable, turn off the power and disconnect the power 
cord. The telephone line cable should not be reconnected or the main power switch turned ON until 
the problem is completely resolved. Users should contact their local authorized Canon Facsimile 
Service Dealer for the servicing of equipment.
Information regarding Authorized Service Facility locations can be obtained by calling the Canon 
Customer Center.
„Rights of the Telephone Company
If this equipment causes harm to the telephone network, the telephone company may temporarily 
disconnect service. The telephone company also retains the right to make changes in facilities and 
services that may affect the operation of this equipment. When such changes are necessary, the 
telephone company is required to give adequate prior notice to the user. However, if advance notice 
is not possible, the telephone company will notify the customer as soon as possible. Also, the 
customer will be advised of his/her right to file a compliant with the FCC if he/she believes it is 
necessary.