Canon Pixma Mp640 Quick Start Guide


7
USB Connection
Install the Software
Click Exit to complete the installation.
If Restart  is displayed, follow the instruction to restart the computer.Next, read "Loading Paper" on page 47!After restarting the computer, remove the Setup CD-ROM and keep it in a safe place.
When using Macintosh, it is necessary to restart the computer before sca\
nning using 
the Operation Panel on the machine for the first time.
 

0Network Connection
N o t e s   o n   N e t w o r k   C o n n e c t i o n
■
Before connecting the machine to the network, make 
sure that configuration of the computer and access 
point or router is complete, and that the computer is 
connected to the network.The configuration, router functions, setup procedures and security 
settings of the network device vary depending on your system 
environment. For details, refer to your device's instruction manual or 
contact its manufacturer.
•
In an...

Network Connection
Select Connection Type
Wireless ConnectionWired ConnectionAn "Ad-hoc connection," which 
establishes a direct connection to the 
computer over a wireless connection 
without using an access point, is not 
supported. 
Be sure to prepare an access point.
Go to "Wireless Setup" on page 22.
Go to "Wired Setup" on page 29.
Select the method to connect the machine to the network.
Connect to your network 
environment over a 
wireless connection.
Connect to...

Network Connection
For details on how to check the following information, refer to the manu\
al of your access point or router, 
or contact its manufacturer.
C h e c k   t h e   I n f o r m a t i o n   f o r   W i r e l e s s   C o n n e c t i o n
■
The following information is required to connect to your access point or\
 router.
Check your access point or router for the following information, then wr\
ite it down.
Access Point Name/Network Name:
Network Key:
* Also referred to as SSID.
* Also...


312
A
B
Network Connection
Wireless Setup
Select Wireless LAN setup, 
then press the OK button.
Use the Easy-Scroll Wheel (A) to select 
Settings, then press the OK button. Select Yes, then press the OK button.
When wireless connection is enabled, the 
Wi-Fi lamp (B) lights blue.
 


456
Network Connection
Wireless Setup
Select Easy settings, then press the 
OK button.When one of the above screens is displayed, enter the network key 
you wrote down on page 22, then press the 
OK button.
If the above screen is not displayed, go to step .
If you are living in an apartment, nearby access 
points in use may be detected.
•
Select the access point name you wrote 
down on page 22, then press the 
OK 
button.
Enter upper and lower case letters of the alphabet correctly.
•
Use the...


78
C
Network Connection
Wireless Setup
Make sure that the network key is correct, then press the OK 
button.
If Failed to connect to the access point.  appears, press the OK button, make sure that the network 
key is correct, then enter it again. If a connection still cannot be est\
ablished, refer to the printed manual: 
Network Setup Troubleshooting .
•
When the completion screen appears, press the 
OK button, then press the HOME button 
(C).
The standby screen returns.
Next, read...

1
A
32
B
Network Connection
Wireless Setup Using WPS (Wi-Fi Protected Setup)
Use the Easy-Scroll Wheel (A) to select 
Settings, then press the OK button.Select Wireless LAN setup, 
then press the OK button.Select Yes, then press the OK button.
When wireless connection is enabled, the 
Wi-Fi lamp (B) lights blue.
 


564
Network Connection
Wireless Setup Using WPS (Wi-Fi Protected Setup) 
Select Push button method, then press the OK button. Press the OK button.
To use the PIN code method for setup, select PIN method in step , then press the OK button. Follow the on-screen instructions to 
operate the machine and access point. When the setup is complete, the co\
mpletion screen appears. Press the  OK button to return to the 
Settings screen.  
A timeout error occurs if setup is not completed within 10...


78
C
Network Connection
Wireless Setup Using WPS (Wi-Fi Protected Setup)
If the timeout error screen appeared repeatedly, or if another error appeared, refer to the printed manual: Network Setup Troubleshooting.
•
Press and hold the WPS button on the access point 
(for about 5 seconds), then press the  OK button on the 
machine within 2 minutes.
For details on the WPS button pressing, refer to the manual of 
your access point.
Next, read "Confirm 
Connection Status" on 
page 32!When...