Canon Pixma Mp640 Quick Start Guide

							Make sure to read this manual before using the machine. Please keep it i\
n hand for future reference.
Getting Started
Read Me First
Photo All-In-One
series
 
						

							Model Number: K10344 (MP640)
S y m b o l s   U s e d   i n   T h i s   D o c u m e n t
■
Instructions as notes for operation or additional explanations. Instructions including important information. Be sure to read these indi\
cations.
Descriptions for operations that take some time to complete.
Indicates operations in Windows.
Indicates operations in Macintosh.
Macintosh, Mac, and AirPort are trademarks of Apple Inc., registered in the U.S. and other countries.
• Microsoft is a registered trademark of Microsoft Corporation.
•
Windows is a trademark or registered trademark of Microsoft Corporation \
in the U.S. and/or other countries.
•
Windows Vista is a trademark or registered trademark of Microsoft Corporation in \
the U.S. and/or other countries.
•
Internet Explorer is a trademark or registered trademark of Microsoft Co\
rporation in the U.S. and/or other countries.
•
Bonjour is a trademark of Apple Inc., registered in the U.S. and other countries.
•
 
						

							
Contents
A f t e r   I n s t a l l i n g   t h e   M a c h i n e   . . . . . . . . . . . . . . . .
Loading Paper   .............................................................
Introduction of Manuals   ...............................................
Solution Menu ..............................................................
Try Using the Machine   .................................................
Try Copying   .................................................................
Print Photos from a Computer   .....................................
Print Photos from a Memory Card  
...............................
47
47
50
51
52
53
56
57
R e f e r e n c e   I n f o r m a t i o n   . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Setup Using WCN  
(Windows Connect Now)   .............................................
58
58
Devices Required to Connect to Computers 
 ...........
P r e p a r a t i o n    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Check the Included Items   ........................................
2
2
2
Preparation 
 ..................................................................
3
N e t w o r k   C o n n e c t i o n   . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wireless Setup   ............................................................
20
22
Wireless Setup Using WPS (Wi-Fi Protected Setup)   ..
Confirm Connection Status  ..........................................
Install the Software   ......................................................
Install the Software (Registration)   ...............................
Install the Software (Information) ................................. 26
32
34
41
45
Check the Information for Wireless Connection 
 ...... 22
H a r d w a r e   S e t u p    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
S e l e c t   C o n n e c t i o n   M e t h o d    . .
 . . . . . . . . . . . . . . . .
U S B   C o n n e c t i o n    . .
 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install the Software  ......................................................
14
14
Select Connection Method 
 ..........................................
13
13
Turn the Power On  
......................................................
Install the Print Head   ...................................................
Install the Ink Tanks   .....................................................
4
4
5
8
Align the Print Head ..................................................... 11 Notes on Network Connection 
 ................................. 20
Wired Setup   ................................................................. 29
Select Connection Type  
............................................... 20
 
						

							Preparation
Preparation
Preparation
Ethernet cable
Router, etc.
Access point or 
wireless router
USB cable
D e v i c e s   R e q u i r e d   t o   C o n n e c t   t o   C o m p u t e r s
■
A USB cable is required.
USB Connection Network Connection
Wired 
Connection
An access point or router that supports IEEE802.11b/g is 
required.A network device (router, etc.) and Ethernet cable are 
required.
Wireless 
Connection
 
						

							
A
Preparation
Preparation
Before turning on the machine, remove all orange tape and protective she\
ets from 
the inside and outside of the machine.The Print Head is placed inside 
of the Paper Output Tray (A). 
Open the Paper Output Tray and 
take it out.
Print Head
(BK, M, C, PGBK, Y) power cord
Manuals•
Setup CD-ROM (containing the drivers, applications and on-screen manual\
s)
•
Warranty
•
C h e c k   t h e   I n c l u d e d   I t e m s
■
Do not install the machine where an object may fall 
on it. The object may fall inside the machine, resulting 
in malfunction.
•
Do not place any object on top of the machine. It may 
fall into the machine when opening covers, resulting 
in malfunction.
•
Choosing a Location
□
Matte Photo Paper MP-101 (for Automatic Print Head Alignment)
• 5 ink tanks A USB cable is necessary to connect the machine with your 
computer (USB connection only).
•
 
						

							12
A
C
B
34
D
FE
Hardware Setup
Turn the Power On
Plug the power cord into the back 
left of the machine, then connect 
the other end to the wall outlet. When the above 
screen is displayed, 
press the OK button 
and go to the next 
step.
Do NOT connect the USB cable or 
Ethernet cable at this stage.
•
The machine may make some operating 
noises. This is normal operation.
•
Make sure that the Document Cover 
(A) is closed.
•
Open the Operation Unit (B) and 
press the ON button (C) to turn on the 
machine.Use the 
{ or 
} button (D) on the Operation 
Panel to select the language for the LCD (E), 
then press the OK button.
If an unintended language is displayed on the LCD, press the  Back button (F) to return to 
the Language selection  screen.
•
Hardware Setup
 
						

							1
A
CB
C
D
2
Hardware Setup
Install the Print Head
Open the Paper Output Tray (A), then lift the Scanning Unit (Cover) (B) 
until it stops.
Handle the Print Head carefully. Do not 
drop or apply excessive pressure to it.
•
The Print Head Holder makes a noise as it moves. This is normal operation.
•
Close the Document Cover (C) and lift it with the Scanning Unit (Cove\
r).
If the Print Head Holder does not move, make sure that the machine is tu\
rned on.
•
Make sure that the Print Head Holder 
(D) moves to the installation position.
 
						

							
345
E
F
G
H
Hardware Setup
Install the Print Head
Remove the Print Head from the 
silver package.
There may be some transparent or light blue ink on the inside of the bag\
 the Print Head 
comes in, or the inside of the protective cap - this has no effect on print quality. Be careful not 
to get ink on yourself when handling these items.
•
Remove the orange protective cap.
Firmly raise the Print Head Lock Lever (E) of the Print Head Holder un\
til it 
stops.
Do not touch the inside of the Print Head Holder (F). The machine may not print 
properly if you touch it.
• Do not touch the inside (G) or metal parts (H) of the Print Head. The machine may not print 
properly if you touch them.
•
 
						

							
67
Hardware Setup
Install the Print Head
Tilt the Print Head forward and set it in place as shown.Lower the Print Head Lock Lever completely.
Do not knock the Print Head against the sides of the holder.
•
Install in a well-lit environment.
• Hold the Print Head Lock Lever firmly and lower it gently.
•
Once you have installed the Print Head, do not remove 
it unnecessarily.
•
 
						

							A
B
C
1
1
2
2
Hardware Setup
Install the Ink Tanks
Handle the ink tanks carefully. Do not drop or 
apply excessive pressure to them.
•
Be sure to use the supplied ink tanks.
• If the Scanning Unit (Cover) is left open for more 
than 10 minutes, the Print Head Holder moves 
to the right. In this case, close and reopen the 
Scanning Unit (Cover).
•
Pull the orange tape (1) in the direction of the 
arrow to peel off the protective film and remove 
the film (2) completely.
While pressing down with your left thumb, twist off 
the orange protective cap (A) located on the bottom 
of the ink tank.
Do not push the sides of the ink tank; ink may splash.
• Do not touch the electrical contacts (B) or open ink port (C) 
on the ink tank. The machine may not print properly if you 
touch them.
•