Canon Pixma Mp550 User Guide

Advanced Guide > About Bluetooth Communication > Troubleshooting 
Troubleshooting 
Troubleshooting
Printer Cannot be Registered
Printing Does Not StartPage top
Page 731 of 877 pagesTroubleshooting
JownloadedtfromtManualsPrinterFcomtManuals  

Advanced Guide > About Bluetooth Communication > Troubleshooting > Troubleshooting
Troubleshooting
This section describes how to solve the problems occurred during the use of the Bluetooth unit.
Problems related to the printers hardware, MP Driver s installation, and so on, are also described in 
Troubleshooting.
Page top
Page 732 of 877 pagesTroubleshooting
JownloadedtfromtManualsPrinterFcomtManuals  

Advanced Guide > About Bluetooth Communication > Troubleshooting > Printer Cannot be Registered
Printer Cannot be Registered
Check 1: Have MP Drivers been installed? 
If MP Drivers are not yet installed, insert the Setup CD-ROM
 into the computers disc drive, then
perform Custom Install and select MP Drivers.
Check 2: Is unsupported Bluetooth driver used? 
Confirm that the Bluetooth driver installed on your  computer is supported.
Toshiba W indows Vista or W indows XP computer 
In W indows Vista, click...

Page top
Page 734 of 877 pages
Printer Cannot be Registered
JownloadedtfromtManualsPrinterFcomtManuals 

Advanced Guide > About Bluetooth Communication > Troubleshooting > Printing Does Not Start
Printing Does Not Start
Check 1: Is Bluetooth unit ready for use? 
Make sure that the Bluetooth settings screen can be displayed on the LCD of the printer. If the
screen cannot be displayed, Bluetooth communication is disa bled. Remove the Bluetooth unit from
the printer and attach it once again.
Attaching to and Removing from the Printer
Make sure that the Bluetooth settings screen can be  displayed on the LCD of...

6.Click OK.
Check 4: Is the message This document failed to print displayed?
Do not retry printing. Check the error message on the LCD.
Clear the error according to 
An Error Message Is Displayed on the LCD.
W hen you use a Microsoft Bluetooth driver, make sur e that the Printing (HCRP) service is
effective on your computer. 
Click Control Panel, Bluetooth Devices under Hardwa re and Sound (Printers and Other
Hardware in non-Vista W indows), then select the pri nter to be used for Bluetooth
communication...

Advanced Guide > About Bluetooth Communication > Specifications
Specifications
Communication
method
Bluetooth v2.0
Maximum Speed1.44 Mbps
OutputBluetooth Power Class 2
Communication 
distanceLine-of-sight distance: approx. 33 ft./10 m * 
* It may vary depending on factors including the presence of obstacles between
communication equipment, radio wave conditions, the pre sence of magnetic
fields around microwave ovens and locations where electro static and radio
interference occur, the types of software...

Advanced Guide > Changing the Machine Settings 
Changing the Machine Settings 
Changing the Machine Settings on the LCD
Changing Machine Settings from Your ComputerPage top
Page 738 of 877 pages
Changing the Machine Settings
JownloadedtfromtManualsPrinterFcomtManuals  

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD 
Changing the Machine Settings on the LCD 
Changing the Machine Settings on the LCD
Plain paper feed settings
Print settings
Advanced settings
Mobile phone print setting
Bluetooth settings
PictBridge print settings
Language selection
Reset setting
Page top
Page 739 of 877 pages
Changing the Machine Settings on the LCD
JownloadedtfromtManualsPrinterFcomtManuals  

Advanced Guide > Changing the Machine Settings > Changing the Machine Settings on the LCD > Changing the Machine
Settings on the LCD
Changing the Machine Settings on the LCD
This section describes the procedure to change the settings i n the Device settings screen, taking the
steps to specify Extended copy amount as an example .
1.Make sure that the machine is turned on.
2.Select  Settings on the HOME screen, then press the OK button.
The Settings screen is displayed.
3.Select  Device settings, then...