Canon Pixma Mp540 User Guide

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication 
Printing Data via Bluetooth Communication 
Preparation
Installing the MP Drivers
Setting the Printer
Registering the Printer
Deleting the Printer
Page top
Page 611 of 758 pages Printing Data via Bluetooth Communication
 

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Preparation
Preparation
In order to print via Bluetooth communication with Windows, the following system requirements must be
satisfied.
Computer
A computer in which an internal Bluetooth module is installed or a computer to which an optional
Bluetooth adapter (available from various manufacturers) is attached.
OS
Microsoft Windows Vista (Satisfying any one of the following conditions is needed)
Bluetooth Devices...

The operations may vary depending on your operating program. In this case, refer to your
computers operation manual.
Page top
Page 613 of 758 pages Preparation
 

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Installing the MP
Drivers
Installing the MP Drivers
Note
If you use the printer connecting with a computer, the MP Drivers have already been installed. In this
case, move to the next step.
Setting the Printer
Before connecting the Bluetooth unit to the printer for wireless printing, first the USB cable must be
connected between the printer and computer, and the MP Drivers must be installed using the Setup CD-...

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Setting the Printer
Setting the Printer
This section describes the procedures for checking the settings of the Bluetooth unit on the LCD of the
printer in preparation for Bluetooth printing.
The screens may differ depending on the printer you are using.
If you need more information about the Bluetooth settings, see 
Setting Bluetooth Printing.
1.Make sure that the Bluetooth unit is attached and the printer is...

After checking the Bluetooth settings using the LCD, register the printer on your computer.
Registering the Printer
Page top
Page 616 of 758 pages Setting the Printer
 

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Registering the Printer
Registering the Printer
Register the printer as a Bluetooth device using Bluetooth Devices under Control Panel.
Note
The following procedure is described assuming that Windows Vista has been installed in your
computer.
Before registering the printer on Bluetooth Devices under Control Panel, enable the Bluetooth
function of your computer.
For more information, refer to your computers...

5.Select the device name of the printer and click Next.
Select the same device name as that checked under Setting the Printer.
Note
If the device name is not displayed, see Check 3: Is the printer name which you want to register
displayed in Printer List?.
6.Select Dont use a passkey, and then Next.
Page 618 of 758 pages Registering the Printer
 

Note
If you set a passkey on the printer, select Use the passkey found in the documentation and
input the passkey then click Next.
For more information about a passkey, see Bluetooth Settings Screen.
7.Click Finish.
8.Check that the device name selected at step 5 is registered on the Devices page,
and click OK.
Now, the settings for printing via Bluetooth communication are ready.
Note
In Windows Vista, the Windows needs to install driver software for your Bluetooth Peripheral
Device screen may be...

Advanced Guide > About Bluetooth Communication > Printing Data via Bluetooth Communication > Deleting the Printer
Deleting the Printer
This section describes the procedure to delete the registered printer.
If you want to re-register the printer as a Bluetooth device, first follow the procedure below to delete the
printer, and then re-register it.
For the procedure to re-register the printer, see 
Registering the Printer.
1.Log into a user account with the administrator privilege.
2.Click Control Panel,...