Canon Pixma Mp520 Quick Start Guide

57 Routine Maintenance
5Adjust the print head position.
(1)Check the printed patterns and use the [ or ] 
button to input the number of the least 
noticeable pattern in column A.
(2)Repeat the same procedure until you finish inputting the pattern number for columns B to 
K, then press the OK button.
(3)Confirm the displayed message and press the OK button.
The second pattern is printed.
Note
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable vertical 
white...

58Routine Maintenance
(4)Check the printed patterns and use the [ or ] 
button to input the number of the pattern in 
columns L and M that has the least noticeable 
horizontal streaks, then press the OK button.
Note
If it is difficult to pick the best pattern, pick the setting that produces the least noticeable horizontal 
white streaks.
(C) Less noticeable horizontal white streaks
(D) More noticeable horizontal white streaks
(C) (D)
MP520_QSG_US.book  Page 58  Thursday, May 31, 2007  5:55 PM
 

59 Routine Maintenance
Cleaning Your Machine
This section describes the cleaning procedure that is needed to maintain your machine.
„Cleaning the Exterior of the Machine
Be sure to use a soft cloth such as eyeglasses cleaning cloth and wipe off dirt on the surface 
with it gently. Smooth out wrinkles on the cloth if necessary before cleaning.
Caution
zDo not use tissue paper, paper towels, or similar materials for cleaning. Paper tissue powders or fine 
threads may remain inside the machine and cause...

60Routine Maintenance
„Cleaning the Platen Glass and Document Cover
With a clean, soft, lint-free cloth, wipe the Platen Glass (B) and the inner side of the Document 
Cover (white sheet) (A) gently. Make sure not  to leave any residue, especially on the Platen 
Glass.
Caution
Be sure to turn off the power and disconnect the power cord before cleaning the machine.
Important
The inner side of the Document Cover (white sheet) (A) is easily damaged, so wipe it gently.
Note
If the Document Cover comes off,...

61 Routine Maintenance
„Cleaning the Paper Feed Roller (Roller Cleaning)
Clean the paper feed roller if paper is not fed properly.
zCleaning the Paper Feed Roller of the Rear Tray
Cleaning the paper feed roller of the Rear Tray will wear the roller, so perform this only when 
necessary.
1Make sure that the machine is turned on, and then remove any paper from the 
Rear Tray and Front Tray.
2Clean the paper feed roller.
(1)Press the HOME button.
The HOME screen is displayed.
(2)Select Settings, then press...

62Routine Maintenance
zCleaning the Paper Feed Roller of the Front Tray
1Turn off the machine.
2Load five or more sheets of A4 or Letter-sized plain paper in the Front Tray.
3Hold the Rear Cover Lever and then press to the right and pull to remove the Rear 
Cover.
4Rotate the paper feed roller toward you using a cotton swab or the like to wipe off 
dust or stain.
Note
Paper is loaded to aid the cleaning process and will not be printed on.
Important
Be sure not to touch the Cleaner (A).
Note
zPaper loaded...

63
Routine Maintenance
5Reattach the Rear Cover.
Hold the Rear Cover so that the Rear Cover Lever comes to the left. Align the protrusions at 
the right edge of the cover with the slots at the rear of the machine and press on the lever to 
reattach the Rear Cover.
6To remove dust after cleaning or dry the wet paper feed roller, perform the copy 
operation from the Front Tray twice.
(1) Load two sheets of A4 or Letter-sized plain paper in the Front Tray.
(2) Turn on the machine, and then press the Paper...

64Routine Maintenance
„Cleaning the Inside of the Machine (Bottom Plate Cleaning)
This section describes how to clean the inside of the machine. If the inside of the machine 
becomes dirty, printed paper may get dirty, so we recommend performing cleaning regularly.
1Make sure that the machine is turned on, and then remove any paper from the 
Rear Tray.
2Open the Front Tray, and then extend the Output Paper Support.
3Fold a single sheet of A4 or Letter-sized plain paper in half widthwise, and then 
unfold...

65
Routine Maintenance
5Perform bottom plate cleaning.
(1) Press the  HOME button.
The  HOME  screen is displayed.
(2) Select  Settings , then press the  OK button.
The  Settings  screen is displayed.
(3) Select  Maintenance , then press the  OK button.
The  Maintenance  screen is displayed.
(4) Select  Bottom plate cleaning , then press the OK button.
The confirmation sc reen is displayed.
(5) Select  Ye s, then press the  OK button.
The paper cleans the inside of the machine as it feeds through the...

66Routine Maintenance
„Cleaning the Protrusions Inside the Machine
If protrusions inside the machine are stained, wipe off any ink from the protrusions using a cotton 
swab or the like.
Caution
Be sure to turn off the power and disconnect the power cord before cleaning the machine.
MP520_QSG_US.book  Page 66  Thursday, May 31, 2007  5:55 PM