Canon Pixma Ix7000 Quick Start Guide

							WindowsMacintosh
A
7
To Use the Printer by Connecting to a Computer
When the Start Setup screen appears, click  Next.
Follow any on-screen instructions to proceed with the 
installation. Go to the next step without performing Print Head 
Alignment.
If you can agree to Extended Survey Program, 
click Agree. 
If you click Do not agree, the Extended Survey 
Program will not be installed.  
(This has no effect on the printer's functionality.)
Important Information for the Installation
The screen does not appear on Mac OS X 
v.10.3.9.
•
About Extended Survey Program
□
The product serial number is required when 
registering the product. The serial number 
is located inside the printer (as shown in the 
illustration). Necessary Information for the User 
Registration
□
When opening the Top Cover (A), the Print Head 
Holder moves automatically.
•
 
						

							WindowsMacintosh
1089
0To Use the Printer by Connecting to a Computer
Select Setup in the pop-up menu, 
then click Register Printer.
If the above screen is not displayed, 
start again from step . Be sure to 
select LAN connection in step   .
•
If the 
Setup Preparations 
screen appears, make sure that 
preparation is complete, then 
click OK.
If the following screen appears
□
On the Canon IJ Network Tool 
screen, select LAN connection, 
then click OK.
After the computer restarts, Canon IJ 
Network Tool starts automatically.
Click Restart .
Remove the Setup CD-ROM and keep it in 
a safe place.
 
						

							WindowsMacintosh
1112-A
Mac OS X v.10.5.x
Mac OS X v.10.3.9 12-C
Mac OS X v.10.4.x12-B
Mac OS X v.10.5.x 12-A
Mac OS X v.10.4.x 12-B
Mac OS X v.10.3.912-C
1
To Use the Printer by Connecting to a Computer
When the Cancel Setup screen 
appears, then click 
Cancel.
The Printer Setup Utility will start up.
When the You have no printers 
available. screen appears, click  Cancel.
•
Wait for a while, then select Canon iX7000 
series
 and click Add.
The alphanumeric characters after  Canon iX7000 series is 
the printer's Bonjour service name or MAC address.
•
If the printer has not been detected, make sure of the 
following.
•
The printer is turned on.
−
The firewall function of any security software is turned 
off.
−
The printer is connected to the network device with the 
LAN cable.
−
The printer is not set to use access control (MAC 
address filtering).
−
Now you can use the printer 
on additional computers.
Proceed to the section that relates to your operating 
system for further installation instructions.
□
 
						

							WindowsMacintosh
234
1
12-BMac OS X v.10.3.9 12-C
Mac OS X v.10.4.x
To Use the Printer by Connecting to a Computer
Click More Printers in the Printer 
Browser window.
Make sure that iX7000 series
 is added 
to the list of printers.
Select Canon IJ Network in 
the pop-up menu, select 
iX7000 
series  in the list of printers, 
then click Add.
When the Printer List window 
appears, click 
Add.
Now you can use the printer 
on additional computers.
 
						

							WindowsMacintosh
1 2 3
12-C
Mac OS X v.10.3.9
To Use the Printer by Connecting to a Computer
When the Printer List window appears, click 
Add. Select Canon IJ Network in the pop-up menu, select 
iX7000 series
 in the list of printers, then click Add. Make sure that iX7000 series
 is added to 
the list of printers.
Now you can use the printer 
on additional computers.
 
						

							1 2
A
B
C
D
E
3
G
F
After Installing the Printer
Loading Paper
Pull out the Cassette slowly with 
both hands, then remove the 
Cassette Cover (E).
This section explains how to load 
paper in the Cassette (A) and the 
Rear Tray (B).
The Cassette supports plain paper (C) 
only. To print photo paper / Hagaki (D), 
be sure to load it in the Rear Tray.
Pull the Cassette out slowly with both 
hands until it stops, then lift its front 
slightly and pull it out.
Pinch the Paper Guides (F) and (G), 
then move them to both edges.
Load plain paper.
Load paper with the printing side 
facing down.
After Installing the Printer
 
						

							56
H
4
After Installing the Printer
Pinch the Paper Guide on the right, then slide it to set the 
Paper Guides against both edges of the paper.
The Paper Guide will stop when it aligns with the 
corresponding mark of paper size.
Pinch the Paper Guide, then align it with the 
paper size.
There may be a little space between the Paper Guide 
and the paper stack.
•To print on specialty paper, be sure to load it in the Rear Tray.
•
Attach the Cassette Cover, then insert 
the Cassette against the back end of the 
printer.
Make sure that the paper stack does not exceed the line (H).
Pull and extend the Cassette to load paper larger 
than A4. 
For details on how to load paper, refer to 
"Loading Paper in the Cassette" in "Loading 
Paper" in the on-screen manual:  Basic Guide.
•
 
						

							I
J
2
2
1
L
K
78 9 10
After Installing the Printer
Load paper in the center of the 
Rear Tray.
Load paper in portrait orientation with 
the printing side facing up.
Move the Paper Guides 
(K) to both edges.
Open the Paper Support (I).
For details on media sizes and types you 
can use, refer to "Loading Paper" in the on-
screen manual: 
Basic Guide.
•
Slide the left and right Paper Guides 
against both edges of the paper.
Make sure that the paper stack does not 
exceed the line (L).
Pull out the Front Tray Extension (J) beforehand.
•Preparation for printing is now complete!
 
						

							After Installing the Printer
 
G e t t i n g   S t a r t e d  
B a s i c   G u i d e
  
A d v a n c e d  
G u i d e  
Introduction of Manuals               
Describes how to set up and use 
your printer. Introduces the printer 
and its functions, the included 
manuals and application sof t ware. Describes basic operations 
and media, and gives an 
introduction to other functions 
available.
Describes various operating 
procedures to make full use of 
printer.
T h e   f o l l o w i n g   m a n u a l s   a r e   s u p p l i e d   w i t h   t h e   p r i n t e r.
( t h i s   m a n u a l ) o n - s c r e e n   m a n u a l s
For details on opening the on-screen manuals, refer to page 58   Tr o u b l e s h o o t i n g
 
Describes troubleshooting tips 
for problems you may encounter 
when using the printer.  N e t w o r k   S e t u p  
Tr o u b l e s h o o t i n g  
 
						

							After Installing the Printer
S o l u t i o n   M e n u   i s   a   g a t e w a y   t o   f u n c t i o n s   a n d   i n f o r m a t i o n   t h a t   a l l o w   y o u   t o   m a k e   f u l l   u s e   o f   t h e   p r i n t e r !
Open various applications and on-screen manuals with a single click.
If you have a problem with printer settings, click the Change settings or find solutions to 
problems. in Solution Menu to open My Printer (Windows only).
Solution Menu
Example: Windows Vista
You can start Solution Menu from the Canon Solution Menu icon on the desktop (Windows) or 
on the Dock (Macintosh). Click this button to open the on-screen manuals.
Click this button to access the website containing 
free printing materials exclusive for the printer. 
(Internet connection is required.)
*The buttons displayed vary depending on 
the country or region of purchase.