Canon Pixma Ix7000 Quick Start Guide

Make sure to read this manual before using the printer. Please keep it in hand for future reference.
Getting Started
Read Me First
series
Photo Printer
 

Model Number: K10338 (iX7000)
Macintosh and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
• Microsoft is a registered trademark of Microsoft Corporation.
•
Windows is a trademark or registered trademark of Microsoft Corporation \
in the U.S. and/or other countries.
•
Windows Vista is a trademark or registered trademark of Microsoft Corporation in \
the U.S. and/or other countries.
•
Adobe, Adobe RGB and Adobe RGB (1998) are either registered trademarks or trademarks of...


Contents
After Installing the PrinterThis section describes how to load paper and introduces various features\
.
Set Up the PrinterTurn on the printer, then install the Print Head and 
ink tanks.
USB ConnectionWired LAN Connection
USB Connection
Install the software and connect the 
printer to a computer.
Setup Additional Computers
Install the software on additional computers to 
use the printer on them.
Wired LAN Connection
Install the software and connect the 
printer to a network.
Using on...

Set Up the Printer
Preparation
LAN cable
Router, etc.
USB cable
D e v i c e s   R e q u i r e d   t o   C o n n e c t   t o   C o m p u t e r s
■
The USB cable supplied with the printer is required.
USB Connection Wired LAN Connection
A network device (router, etc.) and LAN cable are required.
Set Up the Printer
 

Set Up the Printer
C h e c k   t h e   I n c l u d e d   I t e m s
■
5 ink tanks
Print Head
Before turning on the printer, remove all orange tapes and protective sheets from the inside and outs\
ide of the printer.
power cord clear ink tank
USB cable Cassette
The USB cable is used during the network setup 
procedure.
Manuals•
Setup CD-ROM  
(containing the drivers, applications and on-screen manuals)
•
Warranty
•
cleaning sheets
• (PBK, BK, Y, M, C)
 


B
A
12
Set Up the Printer
Installing the Cassette
Insert the Cassette (B) against the back end of 
the printer.
Choosing a Location
□
Do not install the printer where an object may 
fall on it. The object may fall inside the printer, 
resulting in malfunction.
•
Do not place any object on top of the printer. It 
may fall into the printer when opening covers, 
resulting in malfunction.
•
Cleaning sheets are used for cleaning the Transport Roller.
Store the cleaning sheets in the Cleaning Sheet...


2
1 3
AB
Set Up the Printer
Turn the Power On
Make sure that the POWER lamp (B) lights green.
Turn on the printer (A).
Plug the power cord into the back right of the 
printer, then connect the other end to the wall 
outlet.
Do NOT connect the USB cable or LAN cable at this 
stage.
•
 


12B
AC
Set Up the Printer
Install the Print Head
Handle the Print Head carefully. Do not drop or apply 
excessive pressure to it.
•
The Print Head Holder makes a noise as it moves. This is normal operation.
•
If the Print Head Holder does not move, make sure that the printer is tu\
rned on.
•
Open the Paper Output Tray (A) and the Top 
Cover (B). Make sure that the Print Head Holder (C) 
moves to the installation position.
 


5
4
FG
D
E
3
Set Up the Printer
Remove the Print Head from the 
silver package.
There may be some transparent or light color ink on the inside of the ba\
g the Print Head comes in, 
or the inside of the protective cap - this has no effect on print quality. Be careful not to get ink on 
yourself when handling these items. 
•
Remove the orange protective cap.Firmly raise the Print Head Lock Lever (D) of the Print Head Holder 
until it stops.
Do not touch the inside (F) or metal parts (G) of the Print...


7
6
Set Up the Printer
Lower the Print Head Lock Lever completely.
Tilt the Print Head forward and set it in place as shown.
Hold the Print Head Lock Lever firmly and lower it gently.
•
Once you have installed the Print Head, do not remove it 
unnecessarily.
•
Do not knock the Print Head against the sides of the holder.
•