Canon Pixma Ix7000 Quick Start Guide

WindowsMacintosh
15
To Use the Printer by Connecting to a Computer
When the Setup Completion  dialog box appears, remove the USB cable, then click 
Finish .
To change the port name, click  Set Port Name. For details, refer to "Changing the Port Name" in the 
printed manual:  Network Setup Troubleshooting .
•
If 
Unsafe Removal of Device  is displayed, click OK.
•
When the Set Printer IP Address dialog box appears, 
click Connect.
If the printer is detected automatically, the  Set...

WindowsMacintosh
F
I
G
H
D
E
0To Use the Printer by Connecting to a Computer
Important Information for the Installation
Load two sheets of A4 or Letter-sized plain paper into the 
Cassette (D) by referring to "Loading Paper" on page 54, 
then click Execute.Print Head Alignment
□
Pull out the Front Tray Extension (I) beforehand.
•
Wait until the pattern printing ends (about 5 minutes 
after printing starts).
Do not open the Top Cover (E) while printing.
On the Print Head Alignment
 screen,...

WindowsMacintosh
16
To Use the Printer by Connecting to a Computer
After restarting the computer, remove the Setup CD-ROM 
and keep it in a safe place.
Next, read "Loading Paper" on 
page 54!
To use the printer on additional computers, refer to 
"Setup Additional Computers" on page 42.
•
Important Information for the Installation
Click Exit to complete the installation.
If 
Restart  is displayed, follow the instruction to restart the 
computer.
If you can agree to Extended...

WindowsMacintosh
32
1
To Use the Printer by Connecting to a Computer
Wired LAN Connection
Connect the printer to the computer with a USB cable.
Make sure the printer is turned on.
Turn on the computer, then 
insert the Setup CD-ROM 
into the CD-ROM drive.
The USB Port is located on the right side at the back of the 
printer. The lower port is for USB.
•If the CD-ROM folder does not open automatically, double-click 
the CD-ROM icon on the desktop.
•
Double-click the 
Setup icon of the CD-ROM...

WindowsMacintosh
45 6
To Use the Printer by Connecting to a Computer
Click Easy Install.
The drivers, application software, and on-screen 
manuals are installed all together.
If you want to select particular items to install, click 
Custom Install.
•
Click Install.
Follow any on-screen instructions to proceed with the 
software installation.
Read the License Agreement screen carefully and 
click Yes.
 

WindowsMacintosh
7 8
To Use the Printer by Connecting to a Computer
When the Start Setup screen appears, click  Execute.Click Restart.
The Print Head Alignment  screen appears after the computer has been restarted.
 

WindowsMacintosh
F
D
E
A
BC
To Use the Printer by Connecting to a Computer
Important Information for the Installation
Load two sheets of A4 or Letter-sized plain paper into the Cassette (A) by referring 
to "Loading Paper" on page 54, then click  Execute.
Pull out the Front Tray Extension (F) beforehand.
•
Wait until the pattern printing ends (about 5 minutes after printing sta\
rts).
Do not open the Top Cover (B) while printing. When the pattern (C) shown is printed, Print Head...

WindowsMacintosh
9
To Use the Printer by Connecting to a Computer
Remove the Setup CD-ROM and keep it in a safe place.
Important Information for the Installation
Click Exit to complete the installation.
Canon IJ Network Tool starts automatically.
The product serial number is required when 
registering the product. The serial number 
is located inside the printer (as shown in the 
illustration). Necessary Information for the User 
Registration
□
If you can agree to Extended Survey Program,...

WindowsMacintosh
1110
To Use the Printer by Connecting to a Computer
If the Setup Preparations screen 
appears, make sure that preparation 
is complete, then click  OK.Select Setup in the pop-up menu, select 
iX7000 series in 
Printers, then click OK.
If no printer is detected, make sure of the following, then click  Update.
•
The printer is connected to the computer with a USB cable.
−
The printer is turned on.
−
On the Canon IJ Network Tool screen, 
select LAN connection, then click OK.
If...

WindowsMacintosh
GH
12
To Use the Printer by Connecting to a Computer
When the above screen appears, remove the Cap (G) of the printer, connect a network 
device with a LAN cable (H), then click  Yes.
If the following screen appears
□
When the Set Printer IP Address screen appears, 
click Connect.
If no connection is established even after  Connect is 
clicked, refer to "The Set Printer IP Address Screen 
is Displayed" in the printed manual:  Network Setup 
Troubleshooting .
•
If the...