Canon Pixma Ip90 Quick Start Guide

							Appendix87
Accessory Options
The following options are available for this printer.
Confirm the product names when you purchase the options.
„Canon Cradle Kit CK-51B
This option is a kit that consists of a stand dedicated to this printer and a portable kit 
LK-51B (battery charger and lithium-ion battery). The lithium-ion battery can be 
charged with the printer placed upright.
„Canon Portable Kit LK-51B
This option is a battery kit that consists of a battery charger and a lithium-ion battery. 
Use this kit together with the printer in locations where there is no power supply 
(during business trip, etc.).
„Canon Li-ion Battery LB-51
This option is available as an additional lithium-ion battery for the portable kit LK-51B. 
QSG_Spec.fm  Page 87  Monday, October 25, 2004  2:48 PM
 
						

							Appendix
88
„Canon Automobile Power Unit PU-100U
This option is a unit that allows you to su pply power from a cigarette lighter outlet to 
your printer for operation or battery charging.
„ Bluetooth Unit BU-10
This option is a unit that allows you to print wireless from a Bluetooth compatible 
computer.
For further information on the installation or the Bluetooth settings, refer to the 
Bluetooth Unit BU -10 User’s Guide.
QSG_Spec.fm  Page 88  Monday, October 25, 2004  2:48 PM
 
						

							Appendix89
Traveling Abroad with the Printer
Before traveling abroad with the printer, ensure that the following notes.
„About Universal AC Adapter and Power Cord
The Universal AC Adapter can be used abroad  to power the printer from power supplies 
ranging from AC 100 V to 240 V. However, the specification of the power cord differs for 
each country, please purchase the power cord suitable for the specification of each 
country.
*1 Power Cord
*2 Universal AC Adapter
(1) Power Cord
The specification of the power cord changes with each country.
(2) Universal AC Adapter
Universal AC Adapter is not dependent on the specification of each country. It is 
common also abroad and can use.
„Fill Out the CIWS Card
Fill out the CIWS Card (Canon International Warranty System) with the date of purchase 
and the name of where the printer was purchased. Carry this warranty card with you 
when you travel, so you can request repa irs or servicing of the printer at your 
destination. For details, refer to the CIWS card.
*1 *2
QSG_Spec.fm  Page 89  Monday, October 25, 2004  2:48 PM
 
						

							Appendix
90
„The Cautions When Carrying Printer
• Pack up firmly in the case of carrying bag.  For details, refer to Transporting Printer.
• Be careful not to give it the strong vibration which puts a serious thing on the  carrying bag, and a shock. Printer itself  sometimes breaks down, and ink sometimes 
leaks out.
• When you remove the power cord, check that the POWER lamp is off completely. If  the power cord is pulled out while the POWER  lamp is on or flashing, it will become 
the failure.
Note X-ray and any other baggage inspection devices have no 
adverse effect on this printer.
QSG_Spec.fm  Page 90  Monday, October 25, 2004  2:48 PM
 
						

							Appendix91
Specifications
Printer
Printing resolution: 4800* x 1200 dpi. max. (*Ink droplets can be placed in a pitch of 1/4800 inch at minimum.)
Print speed *
*Print speed may vary with the content of the 
document and the processing speed of the 
host computer. Black printing 
Max Speed (Custom Setting 5): 16 ppm
Standard: 12.7 ppm
Color printing 
Max Speed (Custom Setting 5): 12 ppm
Standard: 7.2 ppm
Print width: 203.2 mm max. (8.0 in) (for Borderless Printing: 215.9 mm/8.5 in)
Resident print control mode: Canon extended mode
Receive buffer: 42 KB
Interface: USB/IrDA Ver.1.1/Direct Print Port/Bluetooth Ver.1.1(option)
Acoustic noise level: Approx. 40 dB (A) (in the highest print quality mode)
Operating environment: Temperature: 5 to 35°C (41 to 95°F) Humidity: 10 to 90%RH (no condensation)
Storage environment: Temperature: 0 to 40°C (32 to 104°F) Humidity: 5 to 95% RH (no condensation)
Power supply: AC 100-240 V, 50/60 Hz
Power consumption: Standby: 1 W or lower Printing: Approx. 10 W
OFF: Approx. 0.2 W
Dimensions 
(with Paper Support and Paper Output Tray retracted): 310 (W) x 174 (D) x 51.8 (H) mm
12.20 (W) x 6.85 (D) x 2.04 (H) in
Weight: Approx. 1.8 kg (4 lb.)
Print Head: Black: 160 x 2 nozzles (600 dpi) Cyan, Magenta, Yellow: 128 x 2 x 3 nozzles per each color (600 dpi)
Ink Tanks: Capacity (pages): Black (BCI-15 Black) approx. 185
*1, approx. 450*2
Color (BCI-16 Color) approx. 100*2
*1
 1500 characters per page, normal text, at standard and plain  paper mode with Windows XP printer driver
*2 Based on printing the ISO JIS-SCID No.5 pattern at standard and plain paper mode with Windows XP printer driver
QSG_Spec.fm  Page 91  Monday, October 25, 2004  2:48 PM
 
						

							Appendix
92
Universal AC Adapter
Dimensions: 4.65 (W) x 2.28 (D) x 1.02 (H) in
Weight: Approx. 200 g (0.44 lb)
Rated input: AC 100 to 240 V
Rated output: DC 16 V, 1.8 A
Camera Direct Print 
•Canon Bubble Jet Direct
Compatible Paper Card #1 (Photo Paper Pro 4×6 /101.6×152.4 mm), Card #2 (Photo Paper Plus Glossy, Photo Paper Plus Semi-Gloss, or Glossy Photo 
Paper 4×6 /101.6×152.4 mm), Card #3 (Photo Paper Plus Glossy 
5×7 /127.0×177.8 mm), LTR (Photo Paper Pro, Photo Paper Plus 
Glossy, Photo Paper Plus Semi-Gloss, or Glossy Photo Paper Letter 
size), A4 (Photo Paper Pro, Photo Paper Plus Glossy, Photo Paper 
Plus Semi-Gloss, or Glossy Photo Paper A4 size)
Layout Print Standard: Borderless/with border, Index Print: 6-80 images  (Depending on the size of print media)
Print Quality Standard
Effect Exif Print compatible
DPOF Version Ver. 1.00 compatible (Index print, number of copies, select images,  print special characters (date))
•PictBridge
Paper size Default (Photo Paper Plus Glossy 10 x 15 cm/4×6), 10 x 15 cm/ 4×6 (Photo Paper Plus Glossy, Photo Paper Pro, Photo Paper Plus 
Semi-Gloss, Glossy Photo Paper, or Photo Stickers), 13 x 18 cm/5 
x 7 (Photo Paper Plus Glossy)*, A4/8.5×11 (Photo Paper Plus 
Glossy A4/Letter, Photo Paper Pro A4/Letter, Photo Paper Plus 
Semi-Gloss A4/Letter, Glossy Photo Paper A4/Letter, Plain Paper 
A4/Letter), Credit Card (Glossy Photo Paper)
*If using a Canon PictBridge-compatible camera, you can select it.
Paper Type Default (Photo Paper Plus Glos sy), Photo (Photo Paper Plus Glossy), 
Fast Photo (Photo Paper Pro), Plain Paper
Layout Default (Borderless), Borderless, Bordered, 2-up/4-up/9-up/16- up*
*When 4×6 is selected from “Paper Size”, these options may be available in “Layout”. For details on “Layout”, see the 
Quick Start 
Guide.
Trimming Off (No trimming)
Image optimize Default (Exif Print), “VIVID”*, “NR” (Noise Reduction) *, “VIVID+NR”*
*If using a Canon PictBridge-compatible camera, you can select it.
Date print Default (Off: No printing)
QSG_Spec.fm  Page 92  Monday, October 25, 2004  2:48 PM
 
						

							Appendix93
BJ Printer Driver System Requirements
• Use a computer equipped on which Windows XP, Windows 2000, Windows Me, or Windows 98 can operate.
• USB interface or IrDA Ver.1.1
•CD-ROM drive
• Available hard-disk space for printer driver installation (including temporary files)
Windows XP/Windows 2000: 150MB
Windows Me/Windows 98: 65MB
USB operation can only be guaranteed on a PC with pre-
installed Windows XP, Windows 2000, Windows Me, or 
Windows 98. • Use a Macintosh series computer equipped with USB  interface on which Mac OS X v.10.2.1 or later can operate.
•USB interface
•CD-ROM drive
• Available hard-disk space for printer driver installation Mac OS X v.10.2.1 or later: 340 MB
• The following functions are not supported: -Duplex Printing
- Poster Printing
- Fit to Page Printing
-Booklet Printing
- Reverse Order Printing (except for Mac OS X v.10.3.x)
- Photo Optimizer PRO
Additional System Requirements for Electric Manual
•15 MB free hard disk space
• Windows: Microsoft® Internet Explorer 5.0 or later.
• Macintosh: Microsoft® Internet Explorer 5.0 or later, Safari 1.0 or later.
QSG_Spec.fm  Page 93  Monday, October 25, 2004  2:48 PM
 
						

							Appendix
94
Safety Precautions
Please read the safety warnings and cautions provided in this manual to ensure that you use 
your printer safely. Do not attempt to use printer in any way not described in this manual. 
WarningYou may cause an electric shock/fire or damage the printer if you ignore any of 
these safety precautions.
Choosing a location Do not place the printer close to  flammable solvents such as alcohol or thinners.
Power supply Never attempt to plug in or unplug the printer from the power supply when your hands are wet. Always push the plug all the way into the power outlet.
Never damage, modify, stretch or excessively bend or twist the power cord. 
Do not place heavy objects on the po wer cord or universal AC adapter.
Never plug the printer into a power socket that is shared with other 
equipment (extension lead/cord, 2- or 3- way adapter, etc.).
Never use the printer if the power cord is bundled or knotted.
If you detect smoke, unusual smells or strange no ises around the printer, immediately unplug the 
printer at the power supply and call for service.
Periodically, unplug the printer and use a dry cloth to wipe off any dust or dirt 
collected on the plug and the power outlet. If the printer is placed at a location 
exposed to a lot of dust, smoke, or high humidity, the dust collected on the 
plug absorbs moisture and may cause insulation failure and fire .
Use the universal AC adapter that came with the printer (CANON, K30244). Do not use it for other 
products. 
Cleaning the printer Use a damp cloth to clean the printer. Never use flammable solvents such as  alcohol, benzene or thinners.
If flammable solvents come in contact  with electrical components inside the 
printer, it could cause a fire or electric shock.
Always unplug the printer from the power outlet before cleaning the printer.
If you accidentally switch the printer on while cleaning it, you could injure yourself or damage the 
printer.
Maintaining the printer Do not attempt to disassemble or modify the printer. There are no user serviceable parts inside  the printer.
The printer contains high-voltage components. Never attempt any maintenance procedure not 
described in this guide.
Working around the 
printer Do not use flammable sprays near the printer.
This could cause a fire or electric shock if the sp
ray comes into contact with electrical components 
inside the printer.
QSG_Safty.fm  Page 94  Mo nday, October 25, 2004  2:49 PM
 
						

							Appendix95
Caution You may cause injury or damage the printer if you ignore any of these safety 
precautions.
Choosing a location Do not install the printer in a location that is unstable or subject to excessive vibration.
Do not install the printer in locations that are very humid or dusty, in direct sunlight, outdoors, or 
close to a heating source.
To avoid the risk of fire or electric shocks, install the printer in a location with an ambient 
temperature range of 5°C to 35°C (41°F to 95°F) and humidity of 10% to 90% (condensation free).
Do not place the printer on a thick rug or carpet.
Power supply Ensure that the area around the po wer outlet is kept clear at all times so you 
can easily unplug the power cord if necessary.
Never remove the plug by pulling on the cord.
Do not use an extension lead/ cord.
Working around the 
printer Never put your hands or fingers in the printer while it is printing.
Do not place any object on the printer.
Do not carry or store the printer with the round side down.
A failure can result.
Do not place metal objects (paper clips, staples, etc.) or containers of flammable solvents (alcohol, 
thinners, etc.) on top of the printer.
If any foreign object (metal or liquid) fall into
 the printer, unplug the power cord and call for 
service.
Print Heads and ink tanks For safety reasons store Print Heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately.
Do not shake print heads or ink tanks.
Ink may leak out and stain clothing or the surrounding area.
Never touch the electrical contacts on a Print Head after printing.
The metal parts may be very hot and could cause burns.
Universal AC Adapter When you pack the universal AC adapter for travel or storage, never wrap the cord around the body 
of AC adapter to prevent the cord from splitting or  separating from the body of the AC adapter and 
causing a short circuit.
QSG_Safty.fm  Page 95  Mo nday, October 25, 2004  2:49 PM
 
						

							Appendix
96
Regulatory Information
Color Printer Model: K10249
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not 
cause harmful interference, and (2) this device must accept an y interference received, including interference that may cause 
undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of 
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential 
installation. This equipment generates, uses and can radiate  radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee 
that interference will not occur in a particular installation.  If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver. 
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Use of a shielded cable is required to comply with Class B limits in Subpart B of Part 15 of the FCC Rules.
Do not make any changes or modifications to the equipment un less otherwise specified in the manual. If such changes or 
modifications should be made, you could be required to stop operation of the equipment.
Canon U.S.A., Inc.
One Canon Plaza
Lake Success, NY 11042
1-516-328-5600
Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the 
interference-causing equipment standard entitled “Dig ital Apparatus”, ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils numériques de Classe B 
prescrites dans la norme sur le matériel brouilleur: “Appa reils Numériques”, NMB-003 édictée par l’Industrie Canada.
QSG_Regu.fm  Page 96  Monday, October 25, 2004  2:49 PM