Canon Pixma Ip4700 User Guide

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver> Canon IJ Status Monitor 
Canon IJ Status Monitor 
The Canon IJ Status Monitor is an application software that shows the status of the printer and the
progress of printing on the W indows screen. You wil l know the status of the printer with graphics, icons,
and messages. 
Launching the Canon IJ Status Monitor 
The Canon IJ Status Monitor launches automatically  when data is sent to the...

Advanced Guide > Printing from a Computer > Printing with Other Application Software > Overview of the Printer Driver
> Canon IJ Preview 
Canon IJ Preview 
The Canon IJ Preview is an application software that displays what the print result will look like before a
document is actually printed.  
The preview reflects the information that is set wi thin the printer driver and allows you to check the
document layout, print order, and number of pages.  You can also change the media type and paper
source...

Advanced Guide > Printing on DVD/CDs 
Printing on DVD/CDs 
Printing on the Label Side of DVD/CDs
Troubleshooting
Page top
Page 303 of 437 pages
Printing on DVD/CDs
JownloadedhfromhManualsPrinterDcomhManuals  

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs 
Printing on the Label Side of DVD/CDs 
Items to Prepare
Cautions W hen Printing on DVD/CDs
Attaching/Removing the CD-R Tray
Printing on the Label Side of DVD/CDs
Printing with CD-LabelPrint from the Computer
Printing AreaPage top
Page 304 of 437 pages
Printing on the Label Side of DVD/CDs
JownloadedhfromhManualsPrinterDcomhManuals  

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Items to Prepare
Items to Prepare
The following items are needed to print on DVD/CDs:
CD-R Tray
G is on the upper side.
8 cm CD-R Adapter
Needed only when printing on 8 cm DVD/CDs. 
Attached to the CD-R Tray when shipped.
Printable DVD/CDs 
Obtain a 12 cm or 8 cm DVD/CD with a label surface compatible with inkjet printing.
A printable disc differs from regular DVD/CDs in  that its label surface has been specially
processed to...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Cautions When Printing on DVD/CDs
Cautions When Printing on DVD/CDs
Be sure to use the CD-R Tray supplied with this printer. It has an G on the upper side.
Do not print on DVD/CDs that are not compatible wit h ink-jet printing. The ink will not dry and may
cause problems with the disc itself or devices which the disc  is loaded onto.
Do not print on the DVD/CDs recording surface. Doing so will make data recorded on DVD/CDs...

Advanced Guide > Printing on DVD/CDs > Printing on the Label Side of DVD/CDs > Attaching/Removing the CD-R Tray
Attaching/Removing the CD-R Tray
Attaching the CD-R Tray
Important
Do not attach the CD-R Tray until the message asking you to load the DVD/CD is displayed.
Doing so can damage the printer.
1.Open the Paper Output Tray (A).
2.Make sure that the message asking you to load the D VD/CD is displayed, then open the
Inner Cover (B).
3.Place the DVD/CD on the CD-R Tray.
Important
Make sure that there...

the CD-R Tray.
2.Place the 8 cm disc on the CD-R Tray with the print ing surface facing up.
4.Attach the CD-R Tray to the printer.
Note
The CD-R Tray may be ejected after a specified peri od of time has elapsed. In this case,
follow the on-screen instructions to attach the CD- R Tray.
5.Insert the CD-R Tray straight until the arrow () on the Inner Cover is almost aligned with
the arrow (
) on the CD-R Tray.
(D) Keep the CD-R Tray level when inserting it. 
(E) Align the arrow (
) on the CD-R Tray with the...

2.Close the Inner Cover.
Important
If the Inner Cover is opened, you cannot print on paper as it will not feed properly. Make
sure that the Inner Cover is closed.
3.Remove the DVD/CD from the CD-R Tray.
Important
Do not touch the printing surface when removing the  disc from the CD-R Tray.
Note
Dry the printing surface sufficiently before removing the disc. If you see printing on the
CD-R Tray or the transparent parts on inner or oute r diameter of DVD/CD, wipe them off
after the printing surface has...

1.Remove the 8 cm CD-R Adapter from the CD-R Tray.
2.Remove the 8 cm disc from the CD-R Tray.
Important
The CD-R Tray cannot be used if it becomes warped.  Be sure to keep the CD-R Tray on a flat
place.
Page top
Page 310 of 437 pages
Attaching/Removing the CD-R Tray
JownloadedhfromhManualsPrinterDcomhManuals