Canon Pixma Ip4600 Quick Start Guide

							  19
6
1 2 354
(B)
1112
Click   Execute  .
Printing of the pattern starts.
Wait until the pattern printing ends (about 7 minutes), and go to the next step.
•
When this screen appears, click   OK .
Make sure that the  Output Tray Extension  (B) is extended.
•
 
						

							20
(C)
1314
5
For details, refer to " 6 Loading Paper " on page 22.
•
When the   Load plain paper into the cassette   screen appears, load plain 
paper in the  Cassette  (C) and click   Next .
Make sure that the pattern shown is printed.
 Print Head  Alignment is now complete.
When  Print Head  Alignment cannot be executed properly, the   Alarm   lamp  will 
fl ash orange 11 times. In this case, refer to " When Printing Becomes Faint or 
Colors Are Incorrect " in the on-screen manual:   Basic Guide .
The pattern is printed in blue and black.
•
•
Macintosh
 
						

							  21
6
1 2 354
Serial Number
* * * * * * * 
161517
Click   Exit .
Remove the   Setup CD-ROM   and keep 
it in a safe place.
Click   Next .
If connected to the Internet, the user registration page appears. Follow the on-
screen instructions to register your product. You will need your product serial 
number, which is located on the inside of the printer.
To register later, click   Cancel .   User Registration  can be started from the 
 Solution Menu  icon. For details, refer to " Solution Menu " on page 26.
• Internet connection is required. (Connection fees apply.)
•
Next, read " 6 Loading Paper " on page 22!
Click   Next .
 
						

							22
(A)
(E)
(F)
(D)
(C)
(A)
(B)(G)
(H)
6
213
This section explains how to 
load paper in the Cassette (A) 
and Rear Tray (B).
The Cassette (A) supports plain 
paper (C) only. To print Photo 
Paper/Hagaki (D), be sure to 
load it in the Rear Tray (B).
Pull out the Cassette (A) and 
remove the Cover (E).
Pull the Tab (F) in the direction of 
the arrow and extend the Cassette.
L o a d   i n   t h e   C a s s e t t e
Move the Paper Guides (G) and (H) 
to both edges.
Loading Paper
 
						

							  23
61 2 345
(H)
(E)(G)
(I)
4567
Load paper with the 
printing side facing 
down.
•
To print on speciality paper, be 
sure to load it in the  Rear Tray .
•
Load paper.
Slide the  Paper Guide  (H) to 
align with the mark of paper 
size.
Do not exceed the  Load Limit Mark  (I).
Slide the  Paper Guide  (G) against 
left edge of the paper. Attach the  Cover  (E) and insert 
the  Cassette  into the printer until 
it clicks into place.
The  Paper Guide  (H) will 
stop when it aligns with the 
corresponding mark of paper 
size.
There may be a little space 
between the  Paper Guide  
and the paper stack.
•
 
						

							24
61 2 345
(K)
(J)
(L)(L)
(L)(L)
(M)
981011
6
Printer installation is now complete!
Open the  Rear Tray Cover  
(J), and pull up the  Paper 
Support  (K).
Slide the left and right  Paper Guides  
(L) against both edges of the paper.
For details on media sizes and types 
you can use, refer to "Loading Paper" 
in the on-screen manual:  
Basic Guide .
•
Load paper in portrait orientation 
with the printing side facing up.
• Do not exceed the  Load Limit Mark  (M).
Load paper in the center of the 
 Rear Tray .
L o a d   p a p e r   i n   t h e    R e a r   T r a y  
Move the  Paper Guides  (L) to both 
edges.
Loading Paper
 
						

							  25
S a f e t y   P r e c a u t i o n s
For proper use, read safet y 
precautions before using the 
product.
S a f e t y   a n d   E n v i r o n m e n t  I n f o r m a t i o n
After Installing the Printer
M a n u a l s
■
G e t t i n g   S t a r t e d
( t h i s   m a n u a l )
Describes how to set up and use 
your printer. Introduces the printer 
and its functions, the included 
manuals and application sof t ware.
B a s i c   G u i d e
( o n - s c r e e n   m a n u a l )
Describes the basic operations 
and gives an introduction to other 
functions available.
A d v a n c e d   G u i d e
( o n - s c r e e n   m a n u a l )
Describes various operating 
procedures to make full use 
of the printer. Also includes 
"Troubleshooting" information for 
your printer.
 
						

							26
S o l u t i o n   M e n u
■
S o l u t i o n   M e n u   i s   a   g a t e w a y   t o   f u n c t i o n s   a n d   i n f o r m a t i o n   t h a t   a l l o w   y o u   t o   m a k e   f u l l   u s e   o f   t h e   p r i n t e r !
Open various applications and on-screen manuals with a single click.
You can start Solution Menu from the  Solution Menu icon on the desktop (Windows) or on 
the Dock (Macintosh).
If you have a problem with printer settings, click the  Change settings or find solutions to 
problems  icon in Solution Menu to open  My Printer (Windows only).
*The buttons displayed vary depending on the country or region of purchase. Example: Windows Vista
After Installing the Printer
 
						

							  27
U s i n g   Yo u r   P r i n t e r
■
Now let’s use the printer!
This printer allows you to print in various ways using the printer driver and application software installed on the computer.
For example, you can print borderless photos, and create your own calendar etc. easily.
For detailed operating procedures and functions, refer to the on-screen manuals.
 
						

							2
(A)
2134
Print Photos from a Computer
In Solution Menu, click One-
Click to Photo Print .
Easy-PhotoPrint EX allows you to print photos easily.
This section explains how to print borderless photos using 4" x 6" size Photo Paper Plus Glossy II. The screens are based on Windows Vista.
Select the image you want to print 
in a folder, then click Layout/Print.
Easy-PhotoPrint EX starts. When a photo is selected, the number 
of copies is set to "1."
For opening Solution Menu, refer to "Solution Menu" on page 26.
For more information refer to the on-screen manual:  Advanced Guide.
•
•
Load a sheet of photo paper in the Rear 
Tray (A) in portrait orientation.
For details, refer to "6 Loading Paper" on 
page 22.
•
Click 
Print.
Printing will start.
Load paper with the printing side facing up.
On Macintosh, if the Print screen 
is displayed, click Print to start 
printing.
•