Canon Pixma Ip4600 Quick Start Guide

							  9
6
1 2 354
34Windows Vista Windows Vista
 AutoPlay   screen appears, click   Run Msetup4.exe . User Account Control   screen appears, click  Continue .
If the same screen reappears in subsequent steps, click   Continue .
 
						

							10
657
5
Click Install .
Move the cursor over items to display explanations.
Installation starts.
Follow any on-screen instructions to install the 
software.
•
Read the 
License Agreement  screen carefully 
and click  Yes.
Click 
Easy Install .
The drivers, application software, and on-screen 
manuals are installed automatically.
If you want to select particular items to install, 
click Custom Install and follow the on-screen 
instructions to proceed with the installation.
•
Windows
 
						

							  11
6
1 2 354
USB
8
The  USB port  is located on the right side at the back of the printer.
• It takes about 15 seconds for the  
POWER   lamp  to light green.
When the printer is recognized by the computer, a message appears on the screen.
If you cannot go to the next procedure after 10 minutes, click   Help  and confi rm the message.
•
•
•
When the  
Printer Connection   screen appears, connect one end of the USB cable to the computer, the other to the printer, then TURN 
THE PRINTER ON.
 
						

							12
(C)
5
109
Click Execute .
Windows
Be sure to use the supplied speciality paper (MP-101) for Automatic Print Head Alignment.
MP-101 cannot be fed from the Cassette. Load it in the Rear Tray.
MP-101 has the front and back sides. Load it with the whiter side facing\
 up.
•
•
•
For details, refer to "6 Loading Paper" on page 22.
•
When the  Print Head Alignment  screen appears, load a sheet of supplied speciality paper (MP-101) in 
the Rear Tray (C).
A l i g n   t h e   P r i n t   H e a d
 
						

							  13
6
1 2 354
(D)
1211
Make sure that the pattern shown is printed, then click   Next  on the 
 
Print Head Alignment   screen.
When  Print Head  Alignment cannot be executed properly, the   Alarm   lamp  
will fl ash orange 11 times. In this case, refer to " When Printing Becomes 
Faint or Colors Are Incorrect " in the on-screen manual:   Basic Guide .
The pattern is printed in blue and black.
•
•
 Print Head  Alignment is now complete.
Printing of the pattern starts. Wait until the pattern printing ends (about 7 minutes), and go 
to the next step.
•
When the  
Start Print Head Alignment   screen appears, click 
  Align Print Head  .
Make sure that the  Output Tray Extension  (D) is extended.
•
Click  
OK  in the subsequent message.
 
						

							14
(E)
1413
5
For details, refer to "6 Loading Paper" on page 22.
•
When the  Load plain paper into the cassette  screen appears, load plain paper in 
the Cassette (E) and click  Next.
Windows
Click  Next.
It may take a while for the next screen to appear. Click  Next only once.
 
						

							  15
6
1 2 354
Serial Number
* * * * * * * 
161517
Click   Exit .
Next, read " 6 Loading Paper " on page 22!
When the   Extended Survey 
Program   screen appears, confirm 
the message. 
If you can agree, click   Agree .
If you click   Do not agree  , the 
 
Extended Survey Program   will not 
be installed. (This has no effect on the 
printer's functionality.) 
Click   Next .
If connected to the Internet, the user registration page appears. Follow the on-
screen instructions to register your product. You will need your product serial 
number, which is located on the inside of the printer.
To register later, click   Cancel .   User Registration  can be started from the 
 Solution Menu  icon. For details, refer to " Solution Menu " on page 26.
• Internet connection is required. (Connection fees apply.)
• If  
Restart   is displayed, make sure 
that the   Restart the system now 
(recommended)   check box is 
selected, then click   Restart . Remove 
the CD-ROM after clicking   Restart  
and restarting the computer.
 
						

							16
USB
2314
5
Connect one end of the USB cable to the 
computer and the other to the printer.
Make sure the printer is turned on.
Double-click the  Setup  icon.
Turn on the computer, then 
insert the   Setup CD-ROM   
into the CD-ROM drive.
If the CD-ROM folder does not 
open automatically, double-click the 
  CANON_IJ   icon on the desktop.
Macintosh
The  USB port  is located on the right side at the 
back of the printer.
•
Enter your administrator name 
and password. Click  
OK .
If you do not know your 
administrator name or password, 
click   Help , then follow the on-
screen instructions.
 
						

							  17
6
1 2 354
567
Click   Easy Install  .
The drivers, application software, and on-screen 
manuals are installed automatically.
Click  Install  .
Move the cursor over items to display 
explanations.
If you want to select particular items to install, 
click   Custom Install   and follow the 
on-screen instructions to proceed with the 
installation.
•
Read the  
License Agreement    screen 
carefully and click   Yes .
Installation starts.
Follow any on-screen instructions to install 
the software.
•
 
						

							1
9
5
10
(A)
8
When the  Start Setup   screen appears, 
click   Execute  . Click  
Restart  .
The  Print Head Alignment   screen appears 
after the computer has been restarted.
Macintosh
Load a sheet of supplied speciality paper ( MP-101 ) into the 
 Rear Tray (A) .
A l i g n   t h e    P r i n t   H e a d  
For details, refer to " 6 Loading Paper " on page 22.
• Be sure to use the supplied speciality paper ( MP-101 ) for Automatic 
 Print Head  Alignment.
 MP-101  cannot be fed from the  Cassette . Load it in the  Rear Tray .
 MP-101  has the front and back sides. Load it with the whiter side 
facing up.
•
•
•