Canon Pixma Ip2850 User Guide

PagesTo change the number of pages to be printed on a single sheet of paper, select the number of
pages from the list.
Page Order To change the page arrangement order, select a placement method from the list.
Page Border To print a page border around each document page, check this check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the specified number of pages will be arranged on each sheet of paper in the specified order.
121
 

Tiling/Poster PrintingThe tiling/poster printing function allows you to enlarge image data, divide it into several pages, and print
these pages on separate sheets of paper. You can also paste the pages together to create a large print like
a poster.
The procedure for performing tiling/poster printing is as follows:
Setting Tiling/Poster Printing
1.
Open the printer driver setup window
2.
Set tiling/poster printing
Select  Tiling/Poster  from the Page Layout  list on the Page Setup  tab.
The current...

If necessary, click Specify..., specify the following settings in the  Tiling/Poster Printing dialog box,
and then click  OK.
Image Divisions
Select the number of divisions (vertical x horizontal).As the number of divisions increases, the number of sheets used for printing increases. If you are
pasting pages together to create a poster, increasing the number of divisions allows you to create
a larger poster.
Print "Cut/Paste" in margins To leave out words "Cut" and "Paste",...

Note
•
Click the deleted pages to display them again.
•
Right-click the settings preview to select Print all pages or Delete all pages .
2.
Complete the setup
After completing the page selection, click  OK.
When you execute print, only specified pages will be printed.
Important
•
Since tiling/poster printing enlarges the document when printing it, the print results may become coarse.
124
 

Booklet PrintingThe booklet printing function allows you to print data for a booklet. Data is printed on both sides of the
paper. This type of printing ensures that pages can be collated properly, in page number order, when the
printed sheets are folded and stapled at the center.
The procedure for performing booklet printing is as follows:
1.
Open the printer driver setup window
2.
Set booklet printing
Select  Booklet  from the  Page Layout  list on the Page Setup  tab.
The current settings are displayed...

Margin for staplingSelect which side should the stapling margin be on when the booklet is completed.
Insert blank page To leave one side of a sheet blank, check the check box, and select the page to be left blank.
Margin Enter the margin width. The specified width from the center of the sheet becomes the margin width
for one page.
Page Border To print a page border around each document page, check the check box.
5.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the document...

Duplex Printing
The procedure for printing data on both sides of a sheet of paper is as follows:
You can also set duplex printing in  Additional Features on the Quick Setup  tab.
1.
Open the printer driver setup window
2.
Set duplex printing
Check the  Duplex Printing (Manual)  check box on the Page Setup tab.
3.
Select the layout
Select  Normal-size , Fit-to-Page , Scaled , or Page Layout  from the Page Layout  list.
4.
Specify the side to be stapled
The best  Stapling Side  is selected automatically...

Click OK on the  Page Setup  tab.
When you execute print, the document is first printed on one side of a sheet of paper. After one side is
printed, reload the paper correctly according to the message. Then click  Start Printing  to print the opposite side.
Important
•
When a media type other than  Plain Paper is selected from  Media Type on the Main tab, Duplex
Printing (Manual)  appears grayed out and is unavailable.
•
When Tiling/Poster  or Booklet  is selected from the  Page Layout list, Duplex...

Stamp/Background PrintingStamp  or Background  may be unavailable when certain printer drivers or operating environments are used.
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light illustration
behind the document data.
The procedure for performing stamp/background printing is as follows:
Printing a Stamp
"CONFIDENTIAL," "IMPORTANT," and...

3.Select a stamp
Check the  Stamp check box, and select the stamp to be used from the list.
The current settings are displayed in the settings preview on the left side of the  Page Setup tab.4.
Set the stamp details
If necessary, specify the following settings, and then click  OK.
Define Stamp... button To 
change the stamp text, bitmap, or position , click this.
Place stamp over text To print the stamp on the front of the document, check this check box.
Note
•
The stamp is given priority because the...