Canon Pixma Ip2850 User Guide

Setting the Number of Copies and Printing OrderThe procedure for specifying the number of copies and printing order is as follows:
You can also set the number of copies on the  Quick Setup tab.1.
Open the printer driver setup window
2.
Specify the number of copies to be printed
For  Copies  on the  Page Setup  tab, specify the number of copies to be printed.
3.
Specify the print order
Check the  Print from Last Page  check box when you want to print from the last page in order, and
uncheck the check box...

•
Print from Last Page:  /Collate : 
4.
Complete the setup
Click  OK.
When you execute print, the specified number of copies will be printed with the specified printing order.
Important
•
When the application software that you used to create the document has the same function, specify the
settings on the printer driver. However, if the print results are not acceptable, specify the function
settings on the application software. When you specify the number of copies and the printing order with
both the...

Setting the Stapling Margin
The procedure for setting the staple side and the margin width is as follows:
1.
Open the printer driver setup window
2.
Specify the side to be stapledCheck the position of the stapling margin from  Stapling Side on the Page Setup  tab.
The printer analyzes the  Orientation and Page Layout  settings, and automatically selects the best
staple position. When you want to change the setting, select from the list.
3.
Set the margin width
If necessary, click  Specify Margin... and...

Note•
The printer automatically reduces the print area depending on the staple position margin.
4.
Complete the setup
Click  OK on the  Page Setup  tab.
When you execute print, the data is printed with the specified staple side and margin width.
Important
•
Stapling Side  and Specify Margin...  appear grayed out and are unavailable when:
•
Tiling/Poster or Booklet  is selected for  Page Layout
•
Scaled is selected for  Page Layout (When Duplex Printing (Manual)  is also selected, only
Stapling Side  can...

Fit-to-Page Printing
The procedure for printing a document that is automatically enlarged or reduced to fit the page size to be
used is as follows:
1.
Open the printer driver setup window
2.
Set fit-to-page printing
Select  Fit-to-Page  from the Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Select the print paper size
Select the size of the paper loaded in the printer from the...

5.
Complete the setup
Click  OK.
When you execute print, the document will be enlarged or reduced to fit to the page size.
116
 

Scaled Printing
The procedure for printing a document with pages enlarged or reduced is as follows:
1.
Open the printer driver setup window
2.
Set scaled printingSelect  Scaled  from the  Page Layout  list on the Page Setup  tab.
3.
Select the paper size of the document
Using  Page Size , select the page size that is set with your application software.
4.
Set the scaling rate by using one of the following methods:
•
Select a Printer Paper Size
When the printer paper size is smaller than the  Page Size,...

•
Specify a scaling factorDirectly type in a value into the  Scaling box.
The current settings are displayed in the settings preview on the left side of the printer driver.
5.
Complete the setup
Click  OK.
When you execute print, the document will be printed with the specified scale.
Important
•
When the application software which you used to create the original has the scaled printing function,
configure the settings on your application software. You do not need to configure the same setting in
the...

Note•
Selecting Scaled changes the printable area of the document.119
 

Page Layout PrintingThe page layout printing function allows you to print more than one page image on a single sheet of paper.
The procedure for performing page layout printing is as follows:
1.
Open the printer driver setup window
2.
Set page layout printing
Select  Page Layout  from the Page Layout  list on the Page Setup  tab.
The current settings are displayed in the settings preview on the left side of the printer driver.
3.
Select the print paper size
Select the size of the paper loaded in the...