Canon Pixma Ip1900 User Guide

(B) Rear side
(C) Address side
(1) Align the envelopes against the right side of the Rear Tray (A) and load it WITH
THE ADDRESS SIDE FACING YOU.
The folded flap of the envelope will be faced down on the left side.
Up to 5 envelopes can be loaded at once.
(2) Pinch the Paper Guide and slide it against the left side of the envelopes.
Do not slide the Paper Guide too hard. The paper may not be fed properly.
(3) Set the Paper Thickness Lever to the right.
Reset the Paper Thickness Lever to the left when you...

Advanced Guide  Troubleshooting
Contents > Routine Maintenance
Routine Maintenance
This section describes how to clean the printer when the print result is faint, to replace a FINE Cartridge
when it runs out, or to take an action when paper does not feed properly.
When Printing Becomes Faint or Colors Are Incorrect
Printing the Nozzle Check Pattern
Examining the Nozzle Check Pattern
Cleaning the Print Head
Cleaning the Print Head Deeply
Aligning the Print Head
Replacing a FINE Cartridge
Checking the Ink...

Advanced Guide  Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect
When Printing Becomes Faint or Colors Are Incorrect
If print results are blurred or colors are not printed correctly, the print head nozzles (FINE Cartridges) are
probably clogged. Follow the procedure below to print the nozzle check pattern, check the print head
nozzle condition, then clean the Print Head.
If printed ruled lines are misaligned or print results are otherwise...

Advanced Guide  Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Printing the Nozzle Check
Pattern
 Printing the Nozzle Check Pattern
Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzles.
You need to prepare: a sheet of A4 or Letter-sized plain paper
  Note 
 If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the
FINE Cartridge whose ink is low.
See...

are loaded in the Rear Tray.
Set the Paper Thickness Lever to the left. See Front View.
2.Open the Canon IJ Printer Utility dialog box.
See Opening the Canon IJ Printer Utility (Macintosh).
3.Print the nozzle check pattern.
(1) Select Test Print in the pop-up menu.
(2) Click Nozzle Check.
(3)
 Confirm the displayed message and click Print Check Pattern.
The nozzle check pattern will be printed. Do not open the Front Cover while printing is in progress.
  Note 
 Clicking Initial Check Items displays the...

Advanced Guide  Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Examining the Nozzle Check
Pattern
 Examining the Nozzle Check Pattern
Examine the nozzle check pattern, and clean the Print Head if necessary.
1.Check if lines are missing in the pattern (1), or if there are white streaks in the
pattern (2).
(1) Check if lines are missing in this pattern.
If yes, the cleaning is required.
(A) Good
(B) Bad (Lines are missing)
(2) Check if there are white...

Click Cleaning.
Make sure that a sheet of A4 or Letter-sized plain paper are loaded in the Rear Tray, and then
proceed to the procedure below.
Go to the procedure of (3) in step 3.
Go to the procedure of (3) in step 3.
     
Page top
Стр. 37 из 334 стр. Examining the Nozzle Check Pattern
 

Advanced Guide  Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head
 Cleaning the Print Head
Clean the Print Head if lines are missing or if there are white streaks in the printed nozzle check pattern.
Cleaning unclogs the nozzles and restores the print head condition. Cleaning the Print Head consumes
ink, so clean the Print Head only when necessary.
You need to prepare: a sheet of A4 or Letter-sized plain paper
If you click...

If you click Cleaning on the Pattern Check dialog box that appears after printing the nozzle check pattern,
the printer starts cleaning the Print Head. Make sure that a sheet of A4 or Letter-sized plain paper are
loaded in the Rear Tray, then go to the procedure of (3) in step 3.
1.Make sure that the power is turned on and a sheet of A4 or Letter-sized paper are
loaded in the Rear Tray.
Set the Paper Thickness Lever to the left. See Front View.
2.Open the Canon IJ Printer Utility dialog box.
See Opening...

Advanced Guide  Troubleshooting
Contents > Routine Maintenance > When Printing Becomes Faint or Colors Are Incorrect > Cleaning the Print Head
Deeply
 Cleaning the Print Head Deeply
If print quality does not improve by standard Print Head Cleaning, clean the Print Head deeply. Print Head
Deep Cleaning consumes more ink than standard Print Head Cleaning, so clean the Print Head deeply
only when necessary.
1.Make sure that the power is turned on.
2.Open the printer properties dialog box.
See Opening the...