Canon Pixma Ip1900 User Guide

Advanced Guide > Maintenance > Cleaning Your Printer > Cleaning the Protrusions Inside the Printer
Cleaning the Protrusions Inside the Printer
If protrusions inside the printer are stained, wipe off any ink from the protrusions using a cotton swab or
the like.
caution
Be sure to turn off the power and disconnect the power plug before cleaning the printer.
Page top
Стр. 251 из 334 стр. Cleaning the Protrusions Inside the Printer
 

Advanced Guide > Maintenance > Performing Maintenance from a Computer
Performing Maintenance from a Computer
Cleaning the Print Heads
Cleaning the Paper Feed Rollers
Aligning the Print Head Position
Checking the Print Head Nozzles
Cleaning Inside the Printer
Page top
Стр. 252 из 334 стр. Performing Maintenance from a Computer
 

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Print Heads 
Cleaning the Print Heads 
The print head cleaning function allows you to remove any blockages in the print head nozzles. Perform
print head cleaning if printing is faint or a specific color fails to print, even though there is enough ink. 
The procedure for cleaning the print heads is as follows: 
 Cleaning 
1.Open the printer driver setup window
2.Make sure that the printer is on and then click Cleaning on...

Related Topic 
Checking the Print Head Nozzles
Page top
Стр. 254 из 334 стр. Cleaning the Print Heads
 

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning the Paper Feed Rollers 
Cleaning the Paper Feed Rollers 
The feed roller cleaning function allows you to clean the paper feed roller. Perform feed roller cleaning
when there are paper particles sticking to the paper feed roller and paper is not fed properly. 
The procedure for cleaning the feed rollers is as follows: 
 Roller cleaning 
1.Prepare the printer 
Remove all sheets of paper from the rear tray. 
2.Open the printer...

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Aligning the Print Head Position 
Aligning the Print Head Position 
Print head alignment corrects the installation positions of the print head and improves deviated colors
and lines. 
The procedure for performing print head alignment is as follows: 
 Print Head Alignment 
1.Open the printer driver setup window
2.Click Print Head Alignment on the Maintenance tab 
A message appears. 
3.Load paper in the printer 
Set the paper thickness...

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Checking the Print Head Nozzles 
Checking the Print Head Nozzles 
The nozzle check function allows you to check whether the print heads are working properly by printing a
nozzle check pattern. Print the pattern if printing becomes faint, or if a specific color fails to print. 
The procedure for printing a nozzle check pattern is as follows: 
 Nozzle Check 
1.Open the printer driver setup window
2.Click Nozzle Check on the Maintenance...

Advanced Guide > Maintenance > Performing Maintenance from a Computer > Cleaning Inside the Printer 
Cleaning Inside the Printer 
The bottom plate cleaning function allows you to prevent smudges on the reverse side of a sheet of
paper. Perform bottom plate cleaning before you perform duplex printing. 
Also perform bottom plate cleaning if ink smudges caused by something other than print data appear on
the printed page. 
The procedure for performing bottom plate cleaning is as follows: 
 Bottom Plate...

Advanced Guide > Changing the Printer Settings
Changing the Printer Settings
Changing Printer Settings from Your Computer
Page top
Стр. 259 из 334 стр. Changing the Printer Settings
 

Advanced Guide > Changing the Printer Settings
 > Changing Printer Settings from Your Computer
Changing Printer Settings from Your Computer
Changing the Print Options
Saving a Changed Printing Profile
Setting the Ink Cartridge
Managing the Printer Power
Reducing the Printer Noise
Changing the Printer Operation Mode
Page top
Стр. 260 из 334 стр. Changing Printer Settings from Your Computer