Canon Pixma Ip110 User Guide

About the Power Supply of the Printer
Confirming that the Power Is On
Turning the Printer On and Off
Notice for the Power Plug/Power Cord
Notice for Unplugging the Power Cord
101
 

Confirming that the Power Is OnThe  POWER  lamp is lit when the printer is turned on.
Note
•
It may take a while for the printer to start printing immediately after you turn on the printer.
102
 

Turning the Printer On and OffTurning on the printer1.
Open the rear tray cover.
The paper output slot cover opens automatically.
2.
Press the  ON button to turn on the printer.
The  POWER  lamp flashes and then remains lit.
Confirming that the Power Is On
Note
•
It may take a while for the printer to start printing immediately after you turn on the printer.
•
If the Alarm  lamp flashes, see If an Error Occurs .
•
If you use the battery, make sure that it is charged. For details on how to check it, refer...

Important
•
When you unplug the power cord after turning off the printer, be sure to confirm that the
POWER  lamp is off.
•
If you stand the printer up or carry the printer before the  POWER lamp goes off, this may cause
the ink to leak or the printer to break.
Note
•
It may take up to 40 seconds until the power is turned off.
•
You can set the printer to automatically turn off when no print jobs are sent to the printer for a
certain interval. This is the default setting.
Managing the Printer Power
104
 

Notice for the Power Plug/Power CordUnplug the power cord once a month to confirm that the power plug/power cord does not have anythingunusual described below.•
The power plug/power cord is hot.
•
The power plug/power cord is rusty.
•
The power plug/power cord is bent.
•
The power plug/power cord is worn.
•
The power plug/power cord is split.
Caution
•
If you find anything unusual with the power plug/power cord described above, unplug the power cord
and call for service. Using the printer with one of the...

Notice for Unplugging the Power CordTo unplug the power cord, follow the procedure below.
Important
•
When you unplug the power cord, press the  ON button, then confirm that the  POWER lamp is off.
Unplugging the power cord before the  POWER lamp is turned off may cause drying or clogging of the
print head and print quality may be reduced.
•
If you stand the printer up or carry the printer before the  POWER lamp goes off, this may cause the ink
to leak or the printer to break.
1.
Press the  ON button to...

Loading Paper
Loading Paper
107
 

Loading Paper
Loading Plain Paper / Photo Paper
Loading Envelopes
Media Types You Can Use
Media Types You Cannot Use
Printing Area
108
 

Loading Plain Paper / Photo PaperYou can load plain paper or photo paper.
Important
•
If you cut plain paper into small size such as 4" x 6" (10 x 15 cm) or 5" x 7" (13 x 18 cm) to perform trial
print, it can cause paper jams.
Note
•
We recommend Canon genuine photo paper for printing photos.
For details on the Canon genuine paper, see 
Media Types You Can Use .
•
You can use general copy paper.
•
For the page size and paper weight you can use for this printer, see Media Types You Can...

4.
Slide the paper guide (C) to the left, and load the paper against the far right (D) of the rear
tray WITH THE PRINT SIDE FACING YOU.
5.
Slide the paper guide (C) to align it with the paper stack.
Do not slide the paper guide too hard against the paper. The paper may not be fed properly.
Important
•
Always load paper in the portrait orientation (E). Loading paper in the landscape orientation (F)
can cause paper jams.
110