Canon Pixma Ip110 User Guide

Korisnici u Srbiji
Ovaj simbol označava da ovaj proizvod ne sme da se odlaže sa ostalim kućnim otpadom, u skladu sa
WEEE Direktivom (2012/19/EU), Direktivom o baterijama (2006/66/EC) i nacionalnim zakonima. Ukoliko
je ispod gore navedenog simbola odštampan hemijski simbol, u skladu sa Direktivom o baterijama, ovaj
simbol označava da su u ovoj bateriji ili akumulatoru prisutni teški metali (Hg – živa, Cd – kadmijum, Pb -
olovo) u koncentracijama koje premašuju prihvatljivi prag naveden u Direktivi o...

time or not at all.
Canon does not recommend extending the Activation Times from the optimum ones set as default.
Energy Star ®
The Energy Star ®
 programme is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to minimise environmental impact.
Products which meet the stringent requirements of the Energy Star ®
 programme for both environmental
benefits and the amount of energy consumption will carry the Energy Star ®
 logo accordingly.
Paper types
This...

Main Components and Basic Operations
Main Components
About the Power Supply of the Printer
93
 

Main Components
Front View
Rear View
Side View
Inside View
94
 

Front View
(1) print head coverOpen to replace an ink tank or remove jammed paper inside the printer.
(2) paper guide Align with the left side of the paper stack.
(3) paper support Pull out fully to support paper loaded on the rear tray.
(4) rear tray cover Open to load paper in the rear tray.
(5) rear tray Load paper here. Two or more sheets of the same size and type of paper can be loaded at the sametime, and fed automatically one sheet at a time.
Loading Plain Paper / Photo Paper
Loading Envelopes
(6)...

* All lamps are shown lit in the above figure for explanatory purposes.(8) ON button Turns the power on or off.
Turning the Printer On and Off
(9) POWER lamp Lights after flashing when the power is turned on.
Note
•
You can check the status of the printer by the  POWER and Alarm  lamps.
•
POWER  lamp is off: The power is off.
•
POWER lamp lights: The printer is ready to print.
•
POWER lamp flashes: The printer is getting ready to print, or printing is in progress.
•
Alarm lamp flashes: An error has...

Rear View
(1) battery connectorConnects the battery.
For how to connect and use the battery, refer to the battery's instruction manual.
(2) battery connector cover Covers the battery connector. When the battery is unplugged from the connector, use this cover to
protect the battery connector.
97
 

Side View
(1) AC adapter connectorPlug in the supplied universal AC adapter plug here.
(2) USB port Plug in the USB cable to connect the printer with a computer.
Important
•
Do not touch the metal casing.
•
Do not plug in or unplug the USB cable while printing.
98
 

Inside View
(1) ink lampsLights or flashes to indicate the ink tank status.
Checking the Ink Status with the Ink Lamps
(2) print head holder Install the print head here.
(3) print head lock lever Locks the print head into place.
Important
•
Do not pull up this lever after installing the print head.
•
If you pull up the print head lock lever after installing the print head, push both tabs in left to right orderuntil each clicks into place.
99
 

Note•
For details on replacing an ink tank, see Replacing an Ink Tank.100