Canon network camera VBR13 VE User Manual

Setting Page
5
161
Operation settings for external device output and for external device input triggered events.
External Device Output 1, 2
Set the operation for output to the external device.
The camera has two external device outputs.  You can set the output for each of them.
Note
The output for an external device can be switched between active and  inactive with [External Device Output] of the Camera Viewer (P. 84).
[Operation Mode]
Select whether the output terminals are normally open or closed.
If...

162
External Device Input
[External Device Input Event]
Select whether to use the input from an external device, such as a connected sensor, as an event.
External Device Input 1, 2
You can set the operation to be pe rformed when an event is triggered  by input from an external device.
The camera has two external device inputs. You can set the input for each of them.
You can set these if you have selected [E nable] in [External Device Input Event].
Note
An icon in the [Event and Input/Output] menu of the...

Setting Page
5
163
[Audio Playback at Inactive Event]
If you select [Enable], the sound clip specified in [Sound Clip] will play back  at inactive events for the external device inpu t.
[Sound Clip]
Select the sound clip when [Audio Play back at Active Event] or [Audio Playback at Inactive Event] has been set to 
[Enable].
You must register the sound c lip with [Video and Audio] > [Audio] (P. 148) beforehand.
[Volume]
Enter the volume for the sound clip.
[Switch Day/Night]
Select the Day/Night Mode...

164
Audio input from the microphone connected to the camera, such as loud noises or screams, or when expected audio input 
ceases, can trigger operations such as video recording or e-mail notification.
Note
You can check the audio detection status on the [Event and Input/Output] menu of the Camera Viewer (P. 85).
Volume Detection
A volume detection event will be triggered when audio input vo lume is detected exceeding or falling below the reference 
volume setting.
Set the conditions for triggering a vo...

Setting Page
5
165
[ON Event Operation]
If [Enable] is set, [Preset], [Video Record] and [E-mail Notification] will be ex ecuted according to their settings when a 
volume detection event (ON event) is triggered.
[OFF Event Operation]
If [Enable] is set, [Preset], [Video Re cord] and [E-mail Notification] will be ex ecuted according to their settings when a 
volume detection event (OFF event) is completed.
[Ongoing ON Event Operation]
Select the operation to be performed when  an ON event is triggered....

166
It is necessary to set presets beforehand with [Camera] > [Preset] (P. 131).
[Video Record]
Select whether to record video depending on the scream detection event.
If you select [Enable] and a scream dete ction event is triggered, video will be transmitted to the recording destination 
specified in [Video Record] > [Upload] > [Video Record Action] (P. 156).
[E-mail Notification]
Select whether to send an e-mail notificat ion depending on the scream detection event.
If you select [Enable] and a scream...

Setting Page
5
167
The timer function can generate events that can trigger operations, such as video recording and e-mail notifications, at 
regular intervals.
You can set the following two types of timers.
 24 hours continuous from specified time
 Within specified time only
Either type can be set to trigger timer events at regular intervals.
Timer 1 to 4
You can register up to four timer events.
[Timer Event]
Select whether to use a timer event.
[24-Hour Continuous Setting]
When set to [Enable], the...

168
[Video Record]
Select whether to record video depending on the timer event.
If you select [Enable] and a timer event is triggered, video will be transmitted to the recording destination specified in 
[Video Record] > [Upload] > [V ideo Record Action] (P. 156).
[E-mail Notification]
When [24-Hour Continuous Setting] is set to [Disable], select  whether to send an e-mail notification depending on the timer 
event.
If [Enable] is selected, e-mail notification  is performed when a timer event is...

Setting Page
5
169
Intelligent Function
The Intelligent Function records video, sends e-mail notifications, plays audio and starts other operations when it detects 
changes in the video due to subject movement.
The Intelligent Function has the following modes.
 Video Detection
 Auto Tracking

[Event] > [Intelligent Function]
- Overview -
R13R12
R13M50H652H651
Notes on Use of This Camera
The Intelligent Function is not su itable for applications where high reliability  is required. If constant and maximum...

170
Video Detection
Detects changes to video in a specified area. Ther e are six types of detection to suit your needs.
Moving Object Detection
Detects moving objects. This function can be used  to detect visitors or suspicious individuals.
Moving object detection is triggered while mo ving objects are inside the detection area.
Abandoned Object Detection
Detect objects that are carried in and abandoned for a certain duration. Th is function can be used to detect 
suspicious objects that have been left...