Canon network camera VBR13 VE User Manual
Here you can view all the pages of manual Canon network camera VBR13 VE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
Setting Page
5
111
Installation Conditions
Configure settings for camera use suitable for the location the camera will be installed.
[LED Setting]
Select whether to turn on the LED indicating the camera operation status.
Even if you set [Turn Off], the LED will light for several seconds during startup.
[Image Flip]
Select whether to vertically flip the video.
Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk.
Camera Position Control
Settings for...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-110.png "Page 111
Setting Page
5
111
Installation Conditions
Configure settings for camera use suitable for the location the camera will be installed.
[LED Setting]
Select whether to turn on the LED indicating the camera operation status.
Even if you set [Turn Off], the LED will light for several seconds during startup.
[Image Flip]
Select whether to vertically flip the video.
Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk.
Camera Position Control
Settings for...")
Setting Page 5 111 Installation Conditions Configure settings for camera use suitable for the location the camera will be installed. [LED Setting] Select whether to turn on the LED indicating the camera operation status. Even if you set [Turn Off], the LED will light for several seconds during startup. [Image Flip] Select whether to vertically flip the video. Select the setting suited to the camera installation method, such as ceiling mounting or placing on a desk. Camera Position Control Settings for...
Page 112
![Page 112
112
Sets initial settings, such as video quality compensation, at camera start up. If you change settings, the changes are
immediately reflected in the vid eo display area and Viewer, even if you do not click [Apply].
A message confirms whether you want to display the current camera status as the initial settings if the current camera
status differs from the settings registered as th e initial settings when you access [Initial Setting].
If you click [OK], the current camera status is displayed as the...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-111.png "Page 112
112
Sets initial settings, such as video quality compensation, at camera start up. If you change settings, the changes are
immediately reflected in the vid eo display area and Viewer, even if you do not click [Apply].
A message confirms whether you want to display the current camera status as the initial settings if the current camera
status differs from the settings registered as th e initial settings when you access [Initial Setting].
If you click [OK], the current camera status is displayed as the...")
112 Sets initial settings, such as video quality compensation, at camera start up. If you change settings, the changes are immediately reflected in the vid eo display area and Viewer, even if you do not click [Apply]. A message confirms whether you want to display the current camera status as the initial settings if the current camera status differs from the settings registered as th e initial settings when you access [Initial Setting]. If you click [OK], the current camera status is displayed as the...
Page 113
![Page 113
Setting Page
5
113
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 77).
Camera Settings
Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the
recommended settings as required and click [Apply].
[Focus]
Selects the focus.
[Auto]
Automatically adjusts...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-112.png "Page 113
Setting Page
5
113
Note
The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the
Digital PTZ of the Viewer (P. 77).
Camera Settings
Sets the camera settings at camera start up.
[Simple Camera Settings]
Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the
recommended settings as required and click [Apply].
[Focus]
Selects the focus.
[Auto]
Automatically adjusts...")
Setting Page 5 113 Note The Digital PTZ trim frame (yellow) displayed during startup can be set to incremental sizes. The sizes that can be set are the same as the Digital PTZ of the Viewer (P. 77). Camera Settings Sets the camera settings at camera start up. [Simple Camera Settings] Recommended settings for [Camera Settings] are displayed according to the selected type. You can also change the recommended settings as required and click [Apply]. [Focus] Selects the focus. [Auto] Automatically adjusts...
Page 114
![Page 114
114
[Fixed at infinity]
You can set the focus so that it is fixed near infinity.
Note
Focusing may be difficult for the following types of subjects when using [Auto].
Difficult to Focus Subjects
It is recommended that you check that the cam era is focused whenever you reboot the camera.
The estimated focus ranges depending on the [Day/Night] setting are shown in the following table.
* Using infrared illumination from an external device may throw the camera out of focus.You can use [Camera] >...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-113.png "Page 114
114
[Fixed at infinity]
You can set the focus so that it is fixed near infinity.
Note
Focusing may be difficult for the following types of subjects when using [Auto].
Difficult to Focus Subjects
It is recommended that you check that the cam era is focused whenever you reboot the camera.
The estimated focus ranges depending on the [Day/Night] setting are shown in the following table.
* Using infrared illumination from an external device may throw the camera out of focus.You can use [Camera] >...")
114 [Fixed at infinity] You can set the focus so that it is fixed near infinity. Note Focusing may be difficult for the following types of subjects when using [Auto]. Difficult to Focus Subjects It is recommended that you check that the cam era is focused whenever you reboot the camera. The estimated focus ranges depending on the [Day/Night] setting are shown in the following table. * Using infrared illumination from an external device may throw the camera out of focus.You can use [Camera] >...
Page 115
![Page 115
Setting Page
5
115
[Exposure]
Selects an exposure mode.
Note
If [Auto] is selected in [Day/Night], select either [Auto], [Auto (Flickerless)], [Auto (Shutter-priority AE)] or [Auto (Aperture-priority AE)] for
[Exposure].
[Auto]
Automatically controls the exposure.
[Auto (Flickerless)]
Automatically adjusts the shutter speed according to the brig htness of the usage environment. Video flickering caused
by fluorescent lights, etc., is reduced.
[Auto (Shutter-priority AE)]
Automatically adjusts the apertu...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-114.png "Page 115
Setting Page
5
115
[Exposure]
Selects an exposure mode.
Note
If [Auto] is selected in [Day/Night], select either [Auto], [Auto (Flickerless)], [Auto (Shutter-priority AE)] or [Auto (Aperture-priority AE)] for
[Exposure].
[Auto]
Automatically controls the exposure.
[Auto (Flickerless)]
Automatically adjusts the shutter speed according to the brig htness of the usage environment. Video flickering caused
by fluorescent lights, etc., is reduced.
[Auto (Shutter-priority AE)]
Automatically adjusts the apertu...")
Setting Page 5 115 [Exposure] Selects an exposure mode. Note If [Auto] is selected in [Day/Night], select either [Auto], [Auto (Flickerless)], [Auto (Shutter-priority AE)] or [Auto (Aperture-priority AE)] for [Exposure]. [Auto] Automatically controls the exposure. [Auto (Flickerless)] Automatically adjusts the shutter speed according to the brig htness of the usage environment. Video flickering caused by fluorescent lights, etc., is reduced. [Auto (Shutter-priority AE)] Automatically adjusts the apertu...
Page 116
![Page 116
116
[Metering Mode]
When [Exposure] is set a value other than [Manual], you can selects a metering mode.[Center-Weighted]
Performs photometry with the entire screen center-weighted.
Even if there is a slight difference in lig ht and dark around the screen, subjects near the center will have the appropriate
exposure.
Use this when the subject is near the center of the screen.
[Average]
Performs photometry with the average of the entire screen.
This enables stable exposure to be obtai ned even in...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-115.png "Page 116
116
[Metering Mode]
When [Exposure] is set a value other than [Manual], you can selects a metering mode.[Center-Weighted]
Performs photometry with the entire screen center-weighted.
Even if there is a slight difference in lig ht and dark around the screen, subjects near the center will have the appropriate
exposure.
Use this when the subject is near the center of the screen.
[Average]
Performs photometry with the average of the entire screen.
This enables stable exposure to be obtai ned even in...")
116 [Metering Mode] When [Exposure] is set a value other than [Manual], you can selects a metering mode.[Center-Weighted] Performs photometry with the entire screen center-weighted. Even if there is a slight difference in lig ht and dark around the screen, subjects near the center will have the appropriate exposure. Use this when the subject is near the center of the screen. [Average] Performs photometry with the average of the entire screen. This enables stable exposure to be obtai ned even in...
Page 117
![Page 117
Setting Page
5
117
[Auto]
Automatically adjusts the white balance.
[Manual]
Operate [One-shot WB], [R Gain], and [B Gain] to manually set the white balance.
[Daylight Fluorescent]
Select this when capturing under a daylight fluorescent lamp.
[White Fluorescent]
Select this when capturing under a daylight fluorescent lamp or white fluorescent lamp.
[Warm Fluorescent]
Select this when capturing under a warm fluorescent lamp.
[Mercury Lamp]
Select this when capturing under a mercury lamp.
[Sodium Lamp]...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-116.png "Page 117
Setting Page
5
117
[Auto]
Automatically adjusts the white balance.
[Manual]
Operate [One-shot WB], [R Gain], and [B Gain] to manually set the white balance.
[Daylight Fluorescent]
Select this when capturing under a daylight fluorescent lamp.
[White Fluorescent]
Select this when capturing under a daylight fluorescent lamp or white fluorescent lamp.
[Warm Fluorescent]
Select this when capturing under a warm fluorescent lamp.
[Mercury Lamp]
Select this when capturing under a mercury lamp.
[Sodium Lamp]...")
Setting Page 5 117 [Auto] Automatically adjusts the white balance. [Manual] Operate [One-shot WB], [R Gain], and [B Gain] to manually set the white balance. [Daylight Fluorescent] Select this when capturing under a daylight fluorescent lamp. [White Fluorescent] Select this when capturing under a daylight fluorescent lamp or white fluorescent lamp. [Warm Fluorescent] Select this when capturing under a warm fluorescent lamp. [Mercury Lamp] Select this when capturing under a mercury lamp. [Sodium Lamp]...
Page 118
![Page 118
118
Note
When [Auto] or [Manual] is selected for [Haze Compensation], the video data size may increase.
If using [Haze Compensation] causes a strong difference in video brightness, set [Haze Compensation] to [Manual] and set a wea ker
compensation level.
[Haze Compensation Level]
When Haze Compensation is set to [Manual], set the compensation level.
[Clear IR Mode]
Uses infrared light to reduce shade and heat shimme r in far backgrounds to make the video clearer.
If you select [Enable], the video...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-117.png "Page 118
118
Note
When [Auto] or [Manual] is selected for [Haze Compensation], the video data size may increase.
If using [Haze Compensation] causes a strong difference in video brightness, set [Haze Compensation] to [Manual] and set a wea ker
compensation level.
[Haze Compensation Level]
When Haze Compensation is set to [Manual], set the compensation level.
[Clear IR Mode]
Uses infrared light to reduce shade and heat shimme r in far backgrounds to make the video clearer.
If you select [Enable], the video...")
118 Note When [Auto] or [Manual] is selected for [Haze Compensation], the video data size may increase. If using [Haze Compensation] causes a strong difference in video brightness, set [Haze Compensation] to [Manual] and set a wea ker compensation level. [Haze Compensation Level] When Haze Compensation is set to [Manual], set the compensation level. [Clear IR Mode] Uses infrared light to reduce shade and heat shimme r in far backgrounds to make the video clearer. If you select [Enable], the video...
Page 119
![Page 119
Setting Page
5
119
Note
If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the
infrared lighting. If this occurs, please adjust the camera angle.
If you use the Sunshade Cover (sold separately) in conjunction wi th infrared illumination, switching between day/night using [Day/Night]
> [Auto] may not be possible due to the angle of the lens. In th is case, adjust the angle of the lens (please refer to Installation...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-118.png "Page 119
Setting Page
5
119
Note
If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the
infrared lighting. If this occurs, please adjust the camera angle.
If you use the Sunshade Cover (sold separately) in conjunction wi th infrared illumination, switching between day/night using [Day/Night]
> [Auto] may not be possible due to the angle of the lens. In th is case, adjust the angle of the lens (please refer to Installation...")
Setting Page 5 119 Note If all or part of the image appears to have a white glow, there is a possibility that a wall (even a wall not in the image) is reflecting the infrared lighting. If this occurs, please adjust the camera angle. If you use the Sunshade Cover (sold separately) in conjunction wi th infrared illumination, switching between day/night using [Day/Night] > [Auto] may not be possible due to the angle of the lens. In th is case, adjust the angle of the lens (please refer to Installation...
Page 120
![Page 120
120
Set the focus position when switching day/night. It is necessary to change the focus position since the wavelengths of
regular lighting such as fluorescent lamps and infrared lighting differ.
Note
You can set [Day/Night Mode Focus] if the following conditions have been met.
– When [Focus] (P. 113) is set to [Manual]
– When [Clear IR Mode] (P. 118) is set to [Disable]
Day/Night Mode Focus
[Day/Night Mode Focus Control]
Set the focus control method when switching day/night.
[Use One-shot AF]
Select...](http://img.usermanuals.tech/thumb/14/1406/w300_network-camera-vbr13-ve-1478297522_d-119.png "Page 120
120
Set the focus position when switching day/night. It is necessary to change the focus position since the wavelengths of
regular lighting such as fluorescent lamps and infrared lighting differ.
Note
You can set [Day/Night Mode Focus] if the following conditions have been met.
– When [Focus] (P. 113) is set to [Manual]
– When [Clear IR Mode] (P. 118) is set to [Disable]
Day/Night Mode Focus
[Day/Night Mode Focus Control]
Set the focus control method when switching day/night.
[Use One-shot AF]
Select...")
120 Set the focus position when switching day/night. It is necessary to change the focus position since the wavelengths of regular lighting such as fluorescent lamps and infrared lighting differ. Note You can set [Day/Night Mode Focus] if the following conditions have been met. – When [Focus] (P. 113) is set to [Manual] – When [Clear IR Mode] (P. 118) is set to [Disable] Day/Night Mode Focus [Day/Night Mode Focus Control] Set the focus control method when switching day/night. [Use One-shot AF] Select...