Canon network camera VBR12VE User Manual
Here you can view all the pages of manual Canon network camera VBR12VE User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 71
![Page 71
Camera Viewer
4
71
(1) [Pan/Tilt]The camera angle will move in the direction of each a rrow. Movement will continue while you hold the button
down, and stop when you release it.
Click the center button to move the camera angle to the mi dpoint of the pan/tilt range of motion. However, if a
view restriction is set (P. 128) and th e midpoint is outside the restrict view area, the camera angle moves to the
edge of the restrict view area.
(2) Pan/Tilt Speed Set the operation speed by the [Pan/Tilt]...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-70.png "Page 71
Camera Viewer
4
71
(1) [Pan/Tilt]The camera angle will move in the direction of each a rrow. Movement will continue while you hold the button
down, and stop when you release it.
Click the center button to move the camera angle to the mi dpoint of the pan/tilt range of motion. However, if a
view restriction is set (P. 128) and th e midpoint is outside the restrict view area, the camera angle moves to the
edge of the restrict view area.
(2) Pan/Tilt Speed Set the operation speed by the [Pan/Tilt]...")
Camera Viewer 4 71 (1) [Pan/Tilt]The camera angle will move in the direction of each a rrow. Movement will continue while you hold the button down, and stop when you release it. Click the center button to move the camera angle to the mi dpoint of the pan/tilt range of motion. However, if a view restriction is set (P. 128) and th e midpoint is outside the restrict view area, the camera angle moves to the edge of the restrict view area. (2) Pan/Tilt Speed Set the operation speed by the [Pan/Tilt]...
Page 72
72 Move or Zoom by Dragging Click inside the frame and drag it to pan and tilt the camera. If you click and drag outside the frame, a new frame will be drawn. The camera will pan/tilt/zoom to capture the area in the frame. If you drag an edge of the frame to change its size, the camera will zoom in or out to capture the area in the frame. Move by Clicking If you click outside the frame, the frame will move and center on that point, panning and tilting the camera. Adjusting Video Open [Camera...
Page 73
![Page 73
Camera Viewer
4
73
Setting the Clear IR Mode
If you click the [Clear IR Mode] button to enable it (mak e it purple), the video becomes black and white, which
reduces shade and heat shimmer in far backgrounds.
Switching Day/Night
Set the shooting mode according to the brightness of the installation environment of the camera.
For details on this function, see [D ay/Night] on “Setting Page” (P. 118).
Using Backlight Compensation
Click [BLC] to brighten video that is dark due to backlight.
The back...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-72.png "Page 73
Camera Viewer
4
73
Setting the Clear IR Mode
If you click the [Clear IR Mode] button to enable it (mak e it purple), the video becomes black and white, which
reduces shade and heat shimmer in far backgrounds.
Switching Day/Night
Set the shooting mode according to the brightness of the installation environment of the camera.
For details on this function, see [D ay/Night] on “Setting Page” (P. 118).
Using Backlight Compensation
Click [BLC] to brighten video that is dark due to backlight.
The back...")
Camera Viewer 4 73 Setting the Clear IR Mode If you click the [Clear IR Mode] button to enable it (mak e it purple), the video becomes black and white, which reduces shade and heat shimmer in far backgrounds. Switching Day/Night Set the shooting mode according to the brightness of the installation environment of the camera. For details on this function, see [D ay/Night] on “Setting Page” (P. 118). Using Backlight Compensation Click [BLC] to brighten video that is dark due to backlight. The back...
Page 74
![Page 74
74
Using Presets or the Home Position
It is possible to control the camera using a preset or home position registered to the camera in advance.
When you click the preset selection menu and select a preset from the list that is displayed, the camera will move to the
camera angle of the selected preset.
Clicking the [Home Position] button will move the camera angle to the home position.
Note
Register preset/home positions in advance in [Camera] > [P reset] > [Preset Registration] (P. 131) on the Setting...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-73.png "Page 74
74
Using Presets or the Home Position
It is possible to control the camera using a preset or home position registered to the camera in advance.
When you click the preset selection menu and select a preset from the list that is displayed, the camera will move to the
camera angle of the selected preset.
Clicking the [Home Position] button will move the camera angle to the home position.
Note
Register preset/home positions in advance in [Camera] > [P reset] > [Preset Registration] (P. 131) on the Setting...")
74 Using Presets or the Home Position It is possible to control the camera using a preset or home position registered to the camera in advance. When you click the preset selection menu and select a preset from the list that is displayed, the camera will move to the camera angle of the selected preset. Clicking the [Home Position] button will move the camera angle to the home position. Note Register preset/home positions in advance in [Camera] > [P reset] > [Preset Registration] (P. 131) on the Setting...
Page 75
Camera Viewer 4 75 Viewer PTZ and Digital PTZ are both functions which allow easy panning, tilting and zooming using the digital zoom. Magnifying and Display Part of Video (Viewer PTZ) You can use the Viewer PTZ to magnify part of a video (using digital zoom) without moving the camera. This feature does not use the came ra’s pan, tilt, or zoom features, making it useful fo r situations like the use of the intelligent function, where you do not want to change the camera position. Note You cannot record...
Page 76
76 Move or Resize by Dragging Press the mouse button inside the frame and drag it to move the preview frame. If you press the mouse button and drag outside the frame, a new preview frame will be drawn. You can resize the preview frame by dragging an edge of the frame. Move by Clicking If you click outside the frame, the preview frame will move and center on that point. Move Using the Sliders You can use the pan, tilt and zoom sliders in th e video display area to move the preview frame. Note The Viewer...
Page 77
![Page 77
Camera Viewer
4
77
Cropping Video With Digital PTZ Panel
The [Digital PTZ] button changes active (purple), and the Digital PTZ panel is shown in the control display area.
The preview frame operatio ns are the same as with the Viewer PTZ (P. 75).
The preview frame size can be set to any of 5 sizes. The screen sizes according to the setting in [Basic] > [Video]
> [All Videos] > [Video Size Set] (P. 104) on the Setting Page.
When the aspect ratio 16:9 is selected: 640 x 360, 512 x 288, 384 x 216, 256 x...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-76.png "Page 77
Camera Viewer
4
77
Cropping Video With Digital PTZ Panel
The [Digital PTZ] button changes active (purple), and the Digital PTZ panel is shown in the control display area.
The preview frame operatio ns are the same as with the Viewer PTZ (P. 75).
The preview frame size can be set to any of 5 sizes. The screen sizes according to the setting in [Basic] > [Video]
> [All Videos] > [Video Size Set] (P. 104) on the Setting Page.
When the aspect ratio 16:9 is selected: 640 x 360, 512 x 288, 384 x 216, 256 x...")
Camera Viewer 4 77 Cropping Video With Digital PTZ Panel The [Digital PTZ] button changes active (purple), and the Digital PTZ panel is shown in the control display area. The preview frame operatio ns are the same as with the Viewer PTZ (P. 75). The preview frame size can be set to any of 5 sizes. The screen sizes according to the setting in [Basic] > [Video] > [All Videos] > [Video Size Set] (P. 104) on the Setting Page. When the aspect ratio 16:9 is selected: 640 x 360, 512 x 288, 384 x 216, 256 x...
Page 78
![Page 78
78
Note
The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.
Using Presets or the Home Position
You can use a registered preset or home posi tion to specify the range for Digital PTZ.
If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside
the frame is displayed in the video display area.
Note
Register presets in advance in [Camera] > [Preset] > [Preset Registration] on the Setting Page (P....](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-77.png "Page 78
78
Note
The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality.
Using Presets or the Home Position
You can use a registered preset or home posi tion to specify the range for Digital PTZ.
If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside
the frame is displayed in the video display area.
Note
Register presets in advance in [Camera] > [Preset] > [Preset Registration] on the Setting Page (P....")
78 Note The Digital PTZ uses digital zoom, so the higher the digital zoom ratio, the lower the video quality. Using Presets or the Home Position You can use a registered preset or home posi tion to specify the range for Digital PTZ. If you select a preset, the preview frame on the Digital PTZ panel moves to the preset position, and the video inside the frame is displayed in the video display area. Note Register presets in advance in [Camera] > [Preset] > [Preset Registration] on the Setting Page (P....
Page 79
![Page 79
Camera Viewer
4
79
You can take snapshots while checking the video in the video display area.
The snapshot panel is opened in the control display area and the still image from the instant that the button was
clicked is displayed.
If you click the [Snapshot] button again, the image displayed in the Snapshot panel will be updated.
Note
The snapshot is saved as a JPEG file.
The saved snapshots are the same size as the reception video size.
Saving Snapshots
1
Click the [Snapshot] button at the mome nt...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-78.png "Page 79
Camera Viewer
4
79
You can take snapshots while checking the video in the video display area.
The snapshot panel is opened in the control display area and the still image from the instant that the button was
clicked is displayed.
If you click the [Snapshot] button again, the image displayed in the Snapshot panel will be updated.
Note
The snapshot is saved as a JPEG file.
The saved snapshots are the same size as the reception video size.
Saving Snapshots
1
Click the [Snapshot] button at the mome nt...")
Camera Viewer 4 79 You can take snapshots while checking the video in the video display area. The snapshot panel is opened in the control display area and the still image from the instant that the button was clicked is displayed. If you click the [Snapshot] button again, the image displayed in the Snapshot panel will be updated. Note The snapshot is saved as a JPEG file. The saved snapshots are the same size as the reception video size. Saving Snapshots 1 Click the [Snapshot] button at the mome nt...
Page 80
![Page 80
80
Manually record video being displayed in the video display area to a memory card inserted in the camera.
Note
You can manually record video if the following conditions have been met.
– The memory card inserted in the camera is mounted.
– [Operation Settings] is set to [Save Logs and Videos] in [Video Record] > [Memory Card ] > [Memory Card Operations] (P. 215) in the
Setting Page.
The format and size of the video recorded to a memory card depends on the settings configured on the Setting Page. –...](http://img.usermanuals.tech/thumb/14/1404/w300_network-camera-vbr12ve-1478297402_d-79.png "Page 80
80
Manually record video being displayed in the video display area to a memory card inserted in the camera.
Note
You can manually record video if the following conditions have been met.
– The memory card inserted in the camera is mounted.
– [Operation Settings] is set to [Save Logs and Videos] in [Video Record] > [Memory Card ] > [Memory Card Operations] (P. 215) in the
Setting Page.
The format and size of the video recorded to a memory card depends on the settings configured on the Setting Page. –...")
80 Manually record video being displayed in the video display area to a memory card inserted in the camera. Note You can manually record video if the following conditions have been met. – The memory card inserted in the camera is mounted. – [Operation Settings] is set to [Save Logs and Videos] in [Video Record] > [Memory Card ] > [Memory Card Operations] (P. 215) in the Setting Page. The format and size of the video recorded to a memory card depends on the settings configured on the Setting Page. –...