Canon network camera VBR10VE User Manual

Camera Setup
2
41
When camera installation and initial settings are complete,  access the camera with the Camera Management Tool and 
check if video can be viewed properly.
Access the Top Page from Camera Management Tool
You can use the Camera Management Tool to launch the camera top page.
The web browser will start and the camera top page appears.
Note
 The web browser will not start when [Connection Status] for a camera is [Not connectable].
 You can also launch the camera top page by entering the IP...

42
Click to switch the display language.
(2) [ Setting Page]
Displays the Setting Page (P. 60).
You can make initial camera settings and se ttings to suit how the camera will be used.
(3) [Admin Tools] Displays the Admin Tools top page (P. 193).
You can launch various tools for making settings, such as  for using the camera, or launch a utility for managing 
recorded video.
(4) [Admin Viewer] Launches the Admin Viewer (P. 43).
(5) [VB Viewer] Launches the VB Viewer (P. 43).
User Authentication
When you...

Camera Setup
2
43
 Depending on the security settings in Internet Explorer, the bl ocked content dialog box may appear when attempting to access 
the Setting Page, Admin Tools or the Viewers when using the camera with Internet Explorer 9 or later, or on Windows Server 2008 /
Windows Server 2012. If this happens, click [Add] to re gister the camera IP address as a trusted site.
Checking Camera Video
Check the camera video with a viewer. VB Viewer and Admin Viewer are available.
This section only explains...

44
The Admin Viewer launches and displays the camera video.
2Enter a user name and password (P. 42) and click [OK]. 

Chapter
 
Camera Angle Setting Tool
After installing the camera, connect to it with the Camera Angle Setting Tool and view the displayed video to 
make settings, such as the camera angle, focus and exposure.
M 641M 640M741M740 

46
The Camera Angle Setting Tool allows you to view displayed video on a computer to make settings, such as the camera 
angle and focus.
Use this to adjust the camera during installation or if  the camera has been moved from its original position.
The following gives an overview of the settings t hat can be made with the Camera Angle Setting Tool.
Pan, Tilt, Rotation, Zoom, Focus, Image Flip
Zoom, Focus, Image Flip
Launch the Camera Angle Setting Tool
Double-click the [Camera Angle Setting Tool] icon on...

Camera Angle Setting Tool
3
47
Connect by Specifying Camera Information
The [Connection settings] dialog box appears.
(1) [Host Name] Enter the host name or IP ad dress of the camera (P. 37).
(2) [Administrator User Name] Enter the administra tor user name for the camera (P. 42).
(3) [Administrator Password] Enter the administra tor password for the camera (P. 42).
(4) [Enable  SSL Communications]
Select this to connect to the camera using SSL communication.
Normally, disabling SSL communi cation (the...

48
Use a Camera Specificat ion File for Connecting
You can connect to a camera by loading camera informat ion listed in a camera specification file (P. 56).
The [Select Camera] dialog box appears.
The camera specification file will be loaded and  the camera name will appear in [Camera List].
1Click [File] menu > [Select Camera].
2Click [Load camera specification file].
3Select a camera specification file and click [Open]. 

Camera Angle Setting Tool
3
49
You will connect to the camera.
Connect to the Next Camera
After setting the camera angle, click  [Next] to connect to the next camera.
You will be disconnected from the current camera and co nnected to the next camera appearing in the list.
Note
 The [Select Camera] dialog box will continue to display until y ou close the Camera Angle Setting Tool or click the X in the upper 
right corner of the dialog box.
 The camera list will be discarded when the Camera Angle Setting...

50
You will disconnect from the camera.
The Camera Angle Setting Tool will close.
1Click [File] menu > [Disconnect].
2Click [File] menu > [Exit].