Canon network camera VBM620D User Manual

Restore Default Settings
181
Appendix
7
There is no on/off switch on the camera. Turn the 
camera on and off by plugging in or unplugging LAN 
cable (PoE power supply), AC adapter, or external 
power plug.
The reset switch is located in a recessed area. Push 
the switch using the tip of a slender object such as a 
clip. 
All settings of the camera, except for the date and 
time, are restored to factory default settings. 
For dome case attachment, see the “Installation 
Guide” included with the camera....

182
List of Factory Default Settings
ItemSetting
  User Name (Administrator ID)  root
  Administrator password camera

LAN Interface Auto
Maximum Packet Size 1500

IPv4 Address Setting Method Manual
IPv4 Address   192.168.100.1
Subnet Mask 255.255.255.0
IPv4 Default Gateway Address
AutoIP Enable
IPv4 Address (AutoIP)

IPv6 Enable
Auto (RA) Enable
Auto (DHCPv6) Enable
IPv6 Address (Manual) 
Prefix Length 64
IPv6 Default Gateway Address
IPv6 Address (Auto) 
 DNS
Name Server Address 1
Name Server Address 2...

List of Factory Default Settings
183
Appendix
7
Color Saturation 4
Haze Compensation Disable
Haze Compensation Level 4
Day/Night Day Mode
 Camera Control
Digital Zoom  Disable
Image Stabilizer  Disable
AGC Limit 5
Smart Shade Control Strength 
(Auto)Medium
Haze Compensation Strength 
(Auto)Medium
Pan/tilt speed control  Control by zoom position
 Day/Night (when Auto is set)
Switching Brightness Standard
Response (sec.)  20
 Installation Conditions
Dome Do not use
LED Setting 
    Turn On
Image Flip...

184
Video Quality  3
Target Bit Rate (kbps)  2048
Frame Rate (fps) 30
I Frame Interval (sec)  1
 H.264(2)
H.264(2) Disable
Video Size  320 x 180
Bit Rate Control Use bit rate control 
Video Quality  3
Target Bit Rate (kbps)  2048
Frame Rate (fps) 30
I Frame Interval (sec)  1
„Common to all models
 On-screen display 
Date display  Disable
Position of date display Upper left
Format of date display YYYY/MM/DD
Time display Disable 
Position of time display Upper left
Text display Display nothing
Position of...

List of Factory Default Settings
185
Appendix
7
Notification Notification Only with 
HTTP
URI
User Name
Proxy Server
Proxy Port 80
Proxy User Name
Parameter (query string) 
 FTP Upload
Notification Video data upload with 
FTP
FTP Server
User Name
PASV Mode Enable
File Upload Path
File Naming YYMMDDHHMMSSms
Subdirectory Name to Create
File Name to Create image.jpg
File Name to Create video.mov
Maximum Number of Loops 0
 E-mail Notification
Notification Text Only
Mail Server Name
Mail Server Port 25
Sender...

186
Active Event Operation Disable
Inactive Event Operation Disable
Ongoing Active Event Operation Disable
Preset None
Video Record Disable
E-mail Notification Disable
External Device Output for 
Active EventDisable
External Device Output for 
Inactive EventDisable
Audio Playback at Active Event Disable
Audio Playback at Inactive 
EventDisable
Sound Clip
Volume 50
Day/Night Mode Switching Disable
 External Device Input 2
Operation Mode Normally Open
Active Event Operation Disable
Inactive Event Operation...

List of Factory Default Settings
187
Appendix
7
Video Distribution Checked
Audio Distribution Checked
 IPv4 Host Access Restrictions
Apply Host Access Restrictions Disable
Default Policy Authorize Access
Network Address / Subnet 01: / 32 Yes
     02: / 32 Yes
03: / 32 Yes
04: / 32 Yes
05: / 32 Yes
06: / 32 Yes
07: / 32 Yes
08: / 32 Yes
09: / 32 Yes
10: / 32 Yes
11: / 32 Yes
12: / 32 Yes
13: / 32 Yes
14: / 32 Yes
15: / 32 Yes
16: / 32 Yes
17: / 32 Yes
18: / 32 Yes
19: / 32 Yes
20: / 32 Yes
 IPv6 Host...

188
SA ESP Authentication Key 
(inbound) 
SA ESP SPI (inbound) 
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key 
(outbound) 
SA AH SPI (outbound) 
SA AH Authentication Key 
(inbound) 
SA AH SPI (inbound) 
 IPsec Set 2
IPsec Set Disable
IPsec Mode Tunnel Mode
Destination IPv4 Address
Destination IPv6 Address
Source IPv4 Address
Source IPv6 Address
Security Protocol ESP
Security Gateway IPv4 Address
Security Gateway IPv6 Address
Destination Subnet Mask Length 16
Destination Prefix...

List of Factory Default Settings
189
Appendix
7
IKE Pre-Shared Key 
SA ESP Encryption Algorithm AES
SA ESP Authentication 
AlgorithmHMAC_SHA1_96
SA ESP Encryption Key 
(outbound) 
SA ESP Authentication Key 
(outbound) 
SA ESP SPI (outbound) 
SA ESP Encryption Key 
(inbound) 
SA ESP Authentication Key 
(inbound) 
SA ESP SPI (inbound) 
SA AH Authentication Algorithm HMAC_SHA1_96
SA AH Authentication Key 
(outbound) 
SA AH SPI (outbound) 
SA AH Authentication Key 
(inbound) 
SA AH SPI (inbound) 
 IPsec Set...

190
Notification Level Error
Mail Server Name
Mail Server Port 25
Sender (From)
Recipient (To)
Authentication None
User Name
POP Server
ItemSetting