Canon network camera VBM50B User Manual
Here you can view all the pages of manual Canon network camera VBM50B User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
Camera Detection/Configuration Techniques
4
51
Edited advanced settings are saved to the camera selected in step 1.
The [Advanced Camera Settings] dialog box closes.
Saving Advanced Settings as a File
Settings loaded in [Advanced Camera Settings] can be save d as a file. For example, you can save the advanced camera
settings of a particular moment from the camera to a file, an d recall these settings later by saving them back to a camera.
The [Save As] dialog box appears.
The [Save As] dialog box closes...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-50.png "Page 51
Camera Detection/Configuration Techniques
4
51
Edited advanced settings are saved to the camera selected in step 1.
The [Advanced Camera Settings] dialog box closes.
Saving Advanced Settings as a File
Settings loaded in [Advanced Camera Settings] can be save d as a file. For example, you can save the advanced camera
settings of a particular moment from the camera to a file, an d recall these settings later by saving them back to a camera.
The [Save As] dialog box appears.
The [Save As] dialog box closes...")
Camera Detection/Configuration Techniques 4 51 Edited advanced settings are saved to the camera selected in step 1. The [Advanced Camera Settings] dialog box closes. Saving Advanced Settings as a File Settings loaded in [Advanced Camera Settings] can be save d as a file. For example, you can save the advanced camera settings of a particular moment from the camera to a file, an d recall these settings later by saving them back to a camera. The [Save As] dialog box appears. The [Save As] dialog box closes...
Page 52
![Page 52
52
Loading Advanced Settings From a File
Advanced settings saved as a file can be reloaded using this tool.
The [Open] dialog box appears.
The setting information of the specified file is loaded. When loading is finished, the [Advanced Camera Settings]
dialog box appears.
Note
Only XML files saved with this tool (P. 51) can be loaded. XML files edited using another editor may not load properly.
Editing the Advanced Camera Setting Information
Settings loaded from the camera or a file appear in the [Adv...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-51.png "Page 52
52
Loading Advanced Settings From a File
Advanced settings saved as a file can be reloaded using this tool.
The [Open] dialog box appears.
The setting information of the specified file is loaded. When loading is finished, the [Advanced Camera Settings]
dialog box appears.
Note
Only XML files saved with this tool (P. 51) can be loaded. XML files edited using another editor may not load properly.
Editing the Advanced Camera Setting Information
Settings loaded from the camera or a file appear in the [Adv...")
52 Loading Advanced Settings From a File Advanced settings saved as a file can be reloaded using this tool. The [Open] dialog box appears. The setting information of the specified file is loaded. When loading is finished, the [Advanced Camera Settings] dialog box appears. Note Only XML files saved with this tool (P. 51) can be loaded. XML files edited using another editor may not load properly. Editing the Advanced Camera Setting Information Settings loaded from the camera or a file appear in the [Adv...
Page 53
![Page 53
Camera Detection/Configuration Techniques
4
53
(1) Information on advanced settings load sourceDisplays the model name, IPv4 address, and MAC address loaded to the [Advanced Camera Settings].
(2) Setting item path display Displays the path of the item selected in the setting item list. When a lower level it em in the tree view is selected, the
lower level item is displayed after the upper level item se parated by a comma.
If you enter a setting item in the input field and click [View], a search of the...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-52.png "Page 53
Camera Detection/Configuration Techniques
4
53
(1) Information on advanced settings load sourceDisplays the model name, IPv4 address, and MAC address loaded to the [Advanced Camera Settings].
(2) Setting item path display Displays the path of the item selected in the setting item list. When a lower level it em in the tree view is selected, the
lower level item is displayed after the upper level item se parated by a comma.
If you enter a setting item in the input field and click [View], a search of the...")
Camera Detection/Configuration Techniques 4 53 (1) Information on advanced settings load sourceDisplays the model name, IPv4 address, and MAC address loaded to the [Advanced Camera Settings]. (2) Setting item path display Displays the path of the item selected in the setting item list. When a lower level it em in the tree view is selected, the lower level item is displayed after the upper level item se parated by a comma. If you enter a setting item in the input field and click [View], a search of the...
Page 54
54
Page 55
Chapter Camera Maintenance This chapter explains how to perform various maintenance work for cameras such as updating the firmware, backing up and restoring the settings, and mounting and unmounting memory cards.
Page 56
![Page 56
56
You can update the firmware for multiple cameras or only update the Mobile Camera Viewer for multiple cameras without
updating the firmware.
Updating the Firmware
When updating the firmware, you can specify the firmware file an d set to restore the camera settings to the factory default
settings.
A message appears to display prec autions on updating the firmware.
The [Update Firmware] dialog box appears.
Updating the Software
Important
Do not use an update file that has been edited or manipulated....](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-55.png "Page 56
56
You can update the firmware for multiple cameras or only update the Mobile Camera Viewer for multiple cameras without
updating the firmware.
Updating the Firmware
When updating the firmware, you can specify the firmware file an d set to restore the camera settings to the factory default
settings.
A message appears to display prec autions on updating the firmware.
The [Update Firmware] dialog box appears.
Updating the Software
Important
Do not use an update file that has been edited or manipulated....")
56 You can update the firmware for multiple cameras or only update the Mobile Camera Viewer for multiple cameras without updating the firmware. Updating the Firmware When updating the firmware, you can specify the firmware file an d set to restore the camera settings to the factory default settings. A message appears to display prec autions on updating the firmware. The [Update Firmware] dialog box appears. Updating the Software Important Do not use an update file that has been edited or manipulated....
Page 57
![Page 57
Camera Maintenance
5
57
Click [Browse] and then specify the firmware file in the dialog box that appears.
Note
You can copy and paste the path of the [File Name]. Copy the ta rget by pressing the Ctrl+C keys, and paste by selecting the
destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking.
If you select [Restore], all user settings except the follo wing will be erased and restored to the factory default
settings after the...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-56.png "Page 57
Camera Maintenance
5
57
Click [Browse] and then specify the firmware file in the dialog box that appears.
Note
You can copy and paste the path of the [File Name]. Copy the ta rget by pressing the Ctrl+C keys, and paste by selecting the
destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking.
If you select [Restore], all user settings except the follo wing will be erased and restored to the factory default
settings after the...")
Camera Maintenance 5 57 Click [Browse] and then specify the firmware file in the dialog box that appears. Note You can copy and paste the path of the [File Name]. Copy the ta rget by pressing the Ctrl+C keys, and paste by selecting the destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking. If you select [Restore], all user settings except the follo wing will be erased and restored to the factory default settings after the...
Page 58
![Page 58
58
Updating the Mobile Camera Viewer
You can update the Mobile Camera Viewer for the camera selected in the camera list, without updating the firmware of the
camera.
The update dialog for the Mobile Camera Viewer is displayed.
Click [Browse] and specify the file in the dialog box that is displayed.
Note
You can copy and paste the path of the [File Name]. Copy the targ et by pressing the Ctrl+C keys, and paste by selecting the
destination row and pressing the Ctrl+V keys. paste it using t he Ctrl + V...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-57.png "Page 58
58
Updating the Mobile Camera Viewer
You can update the Mobile Camera Viewer for the camera selected in the camera list, without updating the firmware of the
camera.
The update dialog for the Mobile Camera Viewer is displayed.
Click [Browse] and specify the file in the dialog box that is displayed.
Note
You can copy and paste the path of the [File Name]. Copy the targ et by pressing the Ctrl+C keys, and paste by selecting the
destination row and pressing the Ctrl+V keys. paste it using t he Ctrl + V...")
58 Updating the Mobile Camera Viewer You can update the Mobile Camera Viewer for the camera selected in the camera list, without updating the firmware of the camera. The update dialog for the Mobile Camera Viewer is displayed. Click [Browse] and specify the file in the dialog box that is displayed. Note You can copy and paste the path of the [File Name]. Copy the targ et by pressing the Ctrl+C keys, and paste by selecting the destination row and pressing the Ctrl+V keys. paste it using t he Ctrl + V...
Page 59
![Page 59
Camera Maintenance
5
59
You can batch back up the settings of multiple cameras. The camera setting information can be loaded and then exported
as a backup file. A backup file can be us ed to restore the same settings as when the cameras were backed up or to apply
the same settings to other cameras.
Specifying the Save Location for Backup Files
Before performing a backup, specify the save location for backup files.
The [Environmental Settings] dialog box appears.
Click [Browse] and specify the save...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-58.png "Page 59
Camera Maintenance
5
59
You can batch back up the settings of multiple cameras. The camera setting information can be loaded and then exported
as a backup file. A backup file can be us ed to restore the same settings as when the cameras were backed up or to apply
the same settings to other cameras.
Specifying the Save Location for Backup Files
Before performing a backup, specify the save location for backup files.
The [Environmental Settings] dialog box appears.
Click [Browse] and specify the save...")
Camera Maintenance 5 59 You can batch back up the settings of multiple cameras. The camera setting information can be loaded and then exported as a backup file. A backup file can be us ed to restore the same settings as when the cameras were backed up or to apply the same settings to other cameras. Specifying the Save Location for Backup Files Before performing a backup, specify the save location for backup files. The [Environmental Settings] dialog box appears. Click [Browse] and specify the save...
Page 60
![Page 60
60
Note
You can copy and paste the path of the [File Name]. Copy the target by pressing the Ctrl+C keys, and paste by selecting the destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking.
You can specify the name of the backup file (file extension: .d at). If you choose not to specify a file name, the camera’s MAC
address will be used.
If the save location for backup files is not changed, the last b ackup file will be...](http://img.usermanuals.tech/thumb/14/1388/w300_network-camera-vbm50b-1478296441_d-59.png "Page 60
60
Note
You can copy and paste the path of the [File Name]. Copy the target by pressing the Ctrl+C keys, and paste by selecting the destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking.
You can specify the name of the backup file (file extension: .d at). If you choose not to specify a file name, the camera’s MAC
address will be used.
If the save location for backup files is not changed, the last b ackup file will be...")
60 Note You can copy and paste the path of the [File Name]. Copy the target by pressing the Ctrl+C keys, and paste by selecting the destination row and pressing the Ctrl+V keys. You can select mult iple copy destinations by holding the Ctrl key while clicking. You can specify the name of the backup file (file extension: .d at). If you choose not to specify a file name, the camera’s MAC address will be used. If the save location for backup files is not changed, the last b ackup file will be...