Canon network camera VBH610D User Manual
Here you can view all the pages of manual Canon network camera VBH610D User Manual. The Canon manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 101
![Page 101
Preset Setting Tool
101
6
Admin Tools
Preset Tour
Set a preset tour whereby the camera tours and monitors
the multiple presets currently set.
„[Preset Tour] Tab Display Screen
(1) [Preset Tour] selection box.
Select when you want to perform a preset tour from
the following options.
[Not used]
Preset tour is not performed.
[For Viewers]
Preset tour is performed when a camera is
connected via the VB Viewer, etc.
[Always]
Preset tour is always performed.
(2) Tour schedule list
A list of presets set...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-100.png "Page 101
Preset Setting Tool
101
6
Admin Tools
Preset Tour
Set a preset tour whereby the camera tours and monitors
the multiple presets currently set.
„[Preset Tour] Tab Display Screen
(1) [Preset Tour] selection box.
Select when you want to perform a preset tour from
the following options.
[Not used]
Preset tour is not performed.
[For Viewers]
Preset tour is performed when a camera is
connected via the VB Viewer, etc.
[Always]
Preset tour is always performed.
(2) Tour schedule list
A list of presets set...")
Preset Setting Tool 101 6 Admin Tools Preset Tour Set a preset tour whereby the camera tours and monitors the multiple presets currently set. „[Preset Tour] Tab Display Screen (1) [Preset Tour] selection box. Select when you want to perform a preset tour from the following options. [Not used] Preset tour is not performed. [For Viewers] Preset tour is performed when a camera is connected via the VB Viewer, etc. [Always] Preset tour is always performed. (2) Tour schedule list A list of presets set...
Page 102
![Page 102
102
In [Speed (PT)] and [Speed (Z)], you can set the pan,
tilt, and zoom speeds of the preset.
In [Pause (sec)], you can enter the number of
seconds for the camera to remain stationary at the
preset position.
When [Preview] is clicked, the camera angle switches
to this preset, and the new angle can be checked in
the image display area.
When you want to delete changes made to the tour
schedule list and restore the settings registered in the
camera, click [Restore settings].
When you complete...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-101.png "Page 102
102
In [Speed (PT)] and [Speed (Z)], you can set the pan,
tilt, and zoom speeds of the preset.
In [Pause (sec)], you can enter the number of
seconds for the camera to remain stationary at the
preset position.
When [Preview] is clicked, the camera angle switches
to this preset, and the new angle can be checked in
the image display area.
When you want to delete changes made to the tour
schedule list and restore the settings registered in the
camera, click [Restore settings].
When you complete...")
102 In [Speed (PT)] and [Speed (Z)], you can set the pan, tilt, and zoom speeds of the preset. In [Pause (sec)], you can enter the number of seconds for the camera to remain stationary at the preset position. When [Preview] is clicked, the camera angle switches to this preset, and the new angle can be checked in the image display area. When you want to delete changes made to the tour schedule list and restore the settings registered in the camera, click [Restore settings]. When you complete...
Page 103
103 Admin Tools 6 This tool is used to set intelligent functions that perform uploads, notify the viewer, audio playback, etc., if a change has occurred in the captured image due to movement of a subject. The intelligent functions can perform the following 6 types of detection. Use detection types that best serve your needs. Intelligent Function Setting Tool Admin Viewer RM Viewer Passing DetectionE-mail notification Network Video recording on storage serverUpload to FTP server/HTTP server Volume...
Page 104
104 Abandoned Object Detection Detect objects that are carried in and abandoned for a certain amount of time. This function can be used to detect objects that have been left. Abandoned object detection is triggered when an object is left in the detection area for a specified duration. Object abandoned. Background Image Generated Alert Change in Designated Area Analysis Abandoned Object DetectedThe object is abandoned and detection begins after set time. Removed Object Detection Detect objects that...
Page 105
Intelligent Function Setting Tool 105 6 Admin Tools Caution Notes on Use of This Camera The intelligent functions are not suitable for applications where high reliability is required. If constant and maximum reliability is required for surveillance it is not recommended that you use this function. Canon shall assume no liability for any accident, loss or other undesirable outcomes resulting from intelligent function operations. Passing Detection Detect when a person or moving object crosses a...
Page 106
106 Display Screen of Intelligent Function Setting Tool (1) Image Display Area The image currently captured by the camera is shown. Detection areas are shown in translucently colored frames (rectangular or polygonal) and the detection line is shown as a translucently colored polygonal line or line segment. Also, subjects for which movement has been detected are shown in a detection block and detection frame. Pan, tilt, and zoom operations are the same as in the VB-H41/610/710 Viewer. For details,...
Page 107
![Page 107
Intelligent Function Setting Tool
107
6
Admin Tools
If camera control privileges are not obtained, this
function is grayed out.
(10)[Detection Settings]
Show the [Detection Settings] dialog box (p. 113).
This dialog box allows you to reduce the effects of
lighting changes.
(11)[Lock camera position] checkbox
Select this checkbox to move the camera position to a
preset position selected from the preset selection box
and lock it there. Lock the camera position when
specifying detection settings to...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-106.png "Page 107
Intelligent Function Setting Tool
107
6
Admin Tools
If camera control privileges are not obtained, this
function is grayed out.
(10)[Detection Settings]
Show the [Detection Settings] dialog box (p. 113).
This dialog box allows you to reduce the effects of
lighting changes.
(11)[Lock camera position] checkbox
Select this checkbox to move the camera position to a
preset position selected from the preset selection box
and lock it there. Lock the camera position when
specifying detection settings to...")
Intelligent Function Setting Tool 107 6 Admin Tools If camera control privileges are not obtained, this function is grayed out. (10)[Detection Settings] Show the [Detection Settings] dialog box (p. 113). This dialog box allows you to reduce the effects of lighting changes. (11)[Lock camera position] checkbox Select this checkbox to move the camera position to a preset position selected from the preset selection box and lock it there. Lock the camera position when specifying detection settings to...
Page 108
![Page 108
108
„Intelligent Function Settings
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
(1) [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
(2) [Detection Type]
Select detection types that suit your...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-107.png "Page 108
108
„Intelligent Function Settings
When you click [Add] in the [Detection Setting List],
the [New Detection Settings] dialog box is displayed.
Set the [Detection Setting Number] and [Detection
Type] of the detection setting you want to add, and
then click [OK].
Up to 15 different detection settings can be
registered.
(1) [Detection Setting Number]
Specify a detection setting number from 1 to 15 for the
detection area you want to set.
(2) [Detection Type]
Select detection types that suit your...")
108 „Intelligent Function Settings When you click [Add] in the [Detection Setting List], the [New Detection Settings] dialog box is displayed. Set the [Detection Setting Number] and [Detection Type] of the detection setting you want to add, and then click [OK]. Up to 15 different detection settings can be registered. (1) [Detection Setting Number] Specify a detection setting number from 1 to 15 for the detection area you want to set. (2) [Detection Type] Select detection types that suit your...
Page 109
![Page 109
Intelligent Function Setting Tool
109
6
Admin Tools
Setting Intelligent Function Detection
Settings
„Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
(1) [Detection Settings Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Settings Name], ASCII characters
(spaces or printable characters) can be...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-108.png "Page 109
Intelligent Function Setting Tool
109
6
Admin Tools
Setting Intelligent Function Detection
Settings
„Setting Detection Criteria ([Detection
Criteria] tab)
Set detection criteria while operating the camera and
checking the image in the image display area.
(1) [Detection Settings Name]
You can use up to 64 characters in a detection setting
name. Be sure to enter a single-byte alphanumeric
detection setting name.
In a [Detection Settings Name], ASCII characters
(spaces or printable characters) can be...")
Intelligent Function Setting Tool 109 6 Admin Tools Setting Intelligent Function Detection Settings „Setting Detection Criteria ([Detection Criteria] tab) Set detection criteria while operating the camera and checking the image in the image display area. (1) [Detection Settings Name] You can use up to 64 characters in a detection setting name. Be sure to enter a single-byte alphanumeric detection setting name. In a [Detection Settings Name], ASCII characters (spaces or printable characters) can be...
Page 110
![Page 110
110
„Setting Event Operations ([Event] tab)
Set operations to be performed upon detection of
changes in a subject.
[Event] tab
(1)Specify the operation timing. (Multiple checkboxes can
be selected.)
[ON Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to ON.
[OFF Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the...](http://img.usermanuals.tech/thumb/14/1379/w300_network-camera-vbh610d-1478295901_d-109.png "Page 110
110
„Setting Event Operations ([Event] tab)
Set operations to be performed upon detection of
changes in a subject.
[Event] tab
(1)Specify the operation timing. (Multiple checkboxes can
be selected.)
[ON Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the
moment detected mode is triggered to ON.
[OFF Event Operation] checkbox
When selected, the operations set in (2) [E-mail
Notification] and [Video Record] are performed the...")
110 „Setting Event Operations ([Event] tab) Set operations to be performed upon detection of changes in a subject. [Event] tab (1)Specify the operation timing. (Multiple checkboxes can be selected.) [ON Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the moment detected mode is triggered to ON. [OFF Event Operation] checkbox When selected, the operations set in (2) [E-mail Notification] and [Video Record] are performed the...