Canon network camera VBH610D User Manual

Panorama Creation Tool
91
6
Admin Tools
Note
 While a panorama image is being captured, the image 
stabilizer function is temporarily disabled. 
 While a panorama image is being created, all connections 
other than Administrators and RTP connections are cut off.
 When a small value is entered for [Maximum Frame Rate: 
Video Transmission] under [Video] > [JPEG] in the Setting 
page, panorama capture is slowed down. 
Saving/Deleting a Panorama Image on the 
Camera
How to Save
Click [Save to camera], and...

92
View Restriction Setting Tool is a tool that limits the range that can be captured by the camera. If view restrictions have been 
set, you can limit the displayable capture range using the viewer. 
[Apply View Restriction Setting] 
Restrictions set by the View Restriction Setting Tool are applied in the following cases.
 When the Admin Viewer is accessed with authorized user authorities
 When the VB Viewer is accessed
 When accessed via the Intelligent Function Setting Tool
 When accessed via RM-Lite...

View Restriction Setting Tool
93
6
Admin Tools
Display Screens of View Restriction Setting Tool
(1) Image Display Area
The image currently captured by the camera is shown. 
Pan, tilt, and zoom operations are the same as in the 
VB-H41/610/710 Viewer. For details, see “How to 
Operate the Viewer” (p. 128).
(2) [Switch Mouse Operation] button
Click the button to switch to . In this mode, move 
the mouse pointer to the image display area and click 
to operate the pan and tilt. Click the button again to...

94
[Wide-angle]:Wide-angle limit of the view restriction. 
Click [Get value] to load the zoom 
ratio of the current camera angle.
(11)[Display in panorama screen] 
Apply the current view restriction settings to the 
panorama screen. At this point, the settings are not 
yet saved in the camera. Be sure to click [Save 
settings]. 
(12)[Restore settings] 
Clear the settings you have specified on the screen of 
the tool and restore the settings saved in the camera. 
(13)[Save settings] 
Save the set view...

View Restriction Setting Tool
95
6
Admin Tools
 The pan and tilt ranges vary depending on the zoom ratio 
(view angle). 
 If the view restriction will be exceeded as a result of controlling 
the zoom toward the wide-angle side, the camera will first pan 
and tilt to a position where the maximum wide-angle zoom will 
be within the viewing restriction area. Wide-angle zoom control 
will then be enabled within the view restriction area.
 Reducing the view restriction may also reduce the zoom range. 
Pan...

96
A tool that lets you set presets and the home position. You can make the desired settings with the mouse by referring to the 
preview in the panorama or full image mode. You can also set Preset Tour whereby the camera tours and monitors multiple 
presets. 
Preset Setting Tool
Set preset tour after the 
presets have been set. Preset Setting Tool
Important
 If you want to use intelligent functions, it is strongly recommended that you 
use the Preset Setting Tool to register a preset that corresponds to...

Preset Setting Tool
97
6
Admin Tools
Display Screens of Preset Setting Tool
Preset Setting Tool has two display screens, the [Preset] tab and the [Preset Tour] tab.
With the [Preset] tab, up to 20 presets and the home position are set while referring to the panorama screen or full image. 
With the [Preset Tour] tab, Preset Tour is set whereby the camera tours and monitors multiple presets.
The following explains the [Preset] tab display screen.
For the [Preset Tour] tab, see “Preset Tour” (p. 101)....

98
(11)[Detailed Settings]  
Show the detailed settings. 
(11)-1 [Show in viewers] checkbox  
Select this checkbox to use presets in the 
viewer. When the [Home Position] is selected in 
(8), this function is grayed out.
(11)-2 Camera Parameter  
Enter the center angle of the desired angle in 
[Pan] and [Tilt]. In [Zoom], enter the view angle.
 Camera Angle
[Pan] ..... Set the pan position of the camera.
[Tilt] ....... Set the tilt position of the camera.
[Zoom] .. Set the viewing angle of the camera....

Preset Setting Tool
99
6
Admin Tools
„Use the preview frame of the panorama 
screen to set presets
Use the preview frame of the panorama screen to set 
presets. 
Be sure to enter the preset name. 
If you click on the panorama screen, the preview 
frame will move to center on the clicked point.
The settings are reflected in the image display area. 
If you previewed incorrect settings, etc., and want to 
restore the settings registered in the camera, click 
[Restore settings].
„Using the Digital PTZ...

100
Note
Digital PTZ is a function for transmitting only the specified part of 
a 1920 x 1080 image. This function reduces the load on the 
network because only part of the image is cropped and 
transmitted.
„Specifying Detailed Settings
If you want to fine-tune the camera angle or to adjust the 
image, etc., click [Detailed Settings] and specify the 
detailed settings before saving the preset settings in the 
camera.
The camera parameters in the image display area are 
loaded to [Detailed Settings].
The...