Canon network camera VBC500D User Manual

1-7
1
1Detailed Settings
Setting the Administrator Password, LAN, IPv6, 
DNS, etc. (Network)
Administrator Password 
(1) [Password]
Set the Administrator password. You can use  up to eight (single-byte) ASCII characters 
(space or printable characters). The factory setti ng is camera. If Admin Viewer or VBAdmin 
Tools is connected, disconnect the applicable item before changing the password. 
(2) [Confirm Password] Enter the same password for confirmation. You can set the following items. 
z...

1-8
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
LAN
(1) [IP Address Setting]Select [ Auto (DHCP) ] or [Manual ] as the address setting mode. If [ Auto (DHCP)] is selected, 
the values automatically acquired from t he DHCP server will be entered in [IP Address], 
[ Subnet Mask ] and [Default Gateway Address ]. If [Manual ] is selected, directly enter the 
values appropriate for the environment in which the camera is used. 
(2) [IP Address] If [Manual ] was selected in (1), enter a...

1-9
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1Detailed Settings
 
IPv6
(1) [IPv6] 
Select [ Disable] or [Enable ] regarding the use of IPv6. 
(2) [IPv6 Address] If [Enable ] is selected for IPv6, an automatical ly acquired address will be shown. 
Note
zFor [ IP Address ], [Subnet Mask ] and [Default Gateway Address ], contact your network 
administrator. 
z If any of the [ IP Address], [Subnet Mask ] and [Default Gateway Address ] settings is wrong, 
network access may be...

1-10
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
DNS
(1) [Name Server Address 1], [Name Server Address 2]Enter each name server address you want to register. If only one address is registered, 
keep the [ Name Server Address 2 ] field blank. 
(2) [Host Name Registration with DDNS] Select [ Enable] and enter the host name. The host name can be registered in the name 
server. 
You can use up to 63 (single-byte) characters including A to Z, a to z, 0 to 9, - (hyphen), 
_ (underber)...

1-11
Setting the Administrator Password, LAN, IPv6, DNS, etc. (Network)
1
1Detailed Settings
(4) [Administration Function Name] 
Set the camera name used for administration. The set name can be referenced by the SNMP 
Manager. 
If this field is left blank,  VB-C500VD is used by default when the connected camera is 
VB-C500VD, and VB-C500D when the connected camera is VB-C500D.
(5) [Installation Location] Set information regarding the installation location of this camera. The set name can be 
referenced...

1-12
Setting the Date and Time (Date and Time) 
Current Date and Time 
[Date], [Time]The date and time currently set in the camera is shown. 
Setting
(1) [Setting Method]Select [ Set manually ], [Synchronize with NTP server ], [Synchronize with NTP broadcast ] or 
[ Synchronize with computer time ]. 
(2) [Date], [Time] Set the following items according to the selection for [ Setting Method] made in (1). 
[Set manually]
You can set a desired date and time. Enter the date in the order of  and 
time in the...

1-13
Setting the Date and Time (Date and Time)
1
1Detailed Settings
Example: To specify August 23, 2008 1:23:04 pm, enter 2008/08/23 and 13:23:04.
[Synchronize with NTP server] 
The camera will synchronize with that time of t
he NTP server. Enter the IP address of the 
NTP server. 
[Synchronize with NTP broadcast] 
The camera will synchronize with the NTP broadcast time. 
[Synchronize with computer time] 
The camera will synchronize with the date and  time of the computer currently accessing 
the camera....

1-14
Setting the Camera Control and External Device 
Name (Camera)
Camera Name 
[Camera Name]
Be sure to enter the camera name using up to 15 ASCII characters (space or printable 
characters).    You can set the following items. 
z
Camera Name 
Enter the name of the camera. The camera name is require if VK-64, etc., 
is used with the camera.
z Initial Camera Settings
Set the AF Mode, Slow Shutter and Shutter Speed. 
z Camera Control 
Set the digital zoom. 
z Day/Night
Set the Day/Night switching mode. 
z...

1-15
Setting the Camera Control and External Device Name (Camera)
1
1Detailed Settings
Initial Camera Settings
[AE Mode], [Slow Shutter], [Shutter Speed]
Set the camera exposure control and shutter speed. 
[AE Mode][Auto]
The exposure is controlled automatically. 
[Flickerless]
In this mode, image flickers caused by  fluorescent lights, etc., can be reduced. The 
shutter speed is automatically adjusted accordi ng to the brightness of the environment in 
which the camera is used. 
[Shutter-priority AE]
In...

1-16
Setting the Camera Control and External Device Name (Camera)
Camera Control 
[Digital Zoom]Select [ Enable] or [Disable ] for digital zoom. 
* The higher the digital zoom ratio, the lower the image quality becomes. 
Day/Night
(1) [Mode]
Select [ Manual] or [Auto ] as the Day/Night mode. 
If [ Manual ] is selected, you can manually switch [ Day Mode] and [Night Mode ] using the 
Admin Viewer Night Mode function (  P. 3-28).
If [ Auto ] is selected, set [ Switching Brightness ] and [Response (sec.) ]...