Canon Maxify Mb5020 User Guide

Page Setup tab DescriptionThe  Page Setup  tab allows you to determine how a document is to be arranged on the paper. Also, this tab
allows you to set the number of copies and the order of printing. If the application which created the
document has a similar function, set them with the application.
Settings Preview The paper illustration shows how the original will be laid out on a sheet of paper.
You can check an overall image of the layout.
Page Size Selects a page size.
Ensure that you select the same...

Rotate 180 degreesPrints the document by rotating it 180 degrees against the paper feed direction.
The width of print area and the amount of extension that are configured in other application software will
be reversed vertically and horizontally.
Printer Paper Size Selects the size of paper actually loaded into the printer.
The default setting is  Same as Page Size to perform normal-sized printing.
You can select a printer paper size when you select  Fit-to-Page, Scaled , Page Layout , Tiling/Poster ,
or...

Duplex PrintingSelects whether to print the document automatically on both sides or one side of a sheet of paper.Check this check box to print the document on both sides.
This function can be used only when  Plain Paper is selected for  Media Type and one of Normal-size ,
Fit-to-Page , Scaled , or Page Layout  is selected.
Automatic Selects whether duplex printing is to be performed automatically or manually.
This check box will be enabled if  Booklet is selected from the  Page Layout list or the Duplex...

Stamp/Background... (Stamp...)Opens the 
Stamp/Background (Stamp) dialog box .
The  Stamp  function allows you to print a stamp text or a bitmap over or behind document data. It also
allows you to print date, time and user name. The  Background function allows you to print a light
illustration behind the document data.
Note
•
With the XPS printer driver, the  Stamp/Background... button has become the  Stamp... button and
only the stamp function can be used.
Depending on the type of printer driver you are...

Image DivisionsSelect the number of divisions (vertical x horizontal).
As the number of divisions increases, the number of sheets used for printing increases. If you are pasting pages together to create a poster, increasing the number of divisions allows you to create a
larger poster.
Print "Cut/Paste" in margins Specifies whether to print the words "Cut" and "Paste" in the margins. These words serve as
guidelines for pasting together the pages into a poster.
Check this check box...

Print Area Setup dialog box
When you perform duplex printing, the print area of the document becomes slightly narrower than usual.
Therefore when a document that has small margins is printed, the document may not fit on one page.
This dialog box allows you to set whether the page is to be reduced when printed so that the document
fits in one page.
Use normal-size printing Prints the document pages without reducing them. This is the default setting.
Use reduced printing Slightly reduces each document page...

Important•
Even when this check box is checked, only some of the information in the color profile isdisabled, and the color profile can still be used for printing.
•
Uncheck this check box under normal circumstances.
Ungroup Papers Sets the display method of  Media Type, Page Size , and Printer Paper Size .
To display the items separately, select the check box. To display the items as a group, clear the check box.
Do not allow application software to compress print data Compression of the application...

Unit of Print Data ProcessingSelects the processing unit of the print data to be sent to the printer.
Select  Recommended  under normal circumstances.
Important
•
A large amount of memory may be used for certain settings.
Do not change the setting if your computer has a small amount of memory.
Note
•
Unit of Print Data Processing  tab cannot be used with the XPS printer driver.
Stamp/Background (Stamp...) dialog box The  Stamp/Background  (Stamp... ) dialog box allows you to print a stamp and/or...

BackgroundBackground printing is a function that allows you to print an illustration or a similar object (bitmap)
behind the document.
Check this check box to print a background and select a title from the list.
Select Background... Opens the 
Background Settings dialog box .
You can register a bitmap as a background, and change layout method and intensity of the selected
background.
Background first page only Selects whether to print the background on the first page only or print on all pages when the...

When Stamp Type  is Bitmap
File Specifies the name of the bitmap file to be used as the stamp.
Select File... Opens the dialog box to open a file.Click this button to select a bitmap file to be used as a stamp.
Size Adjusts the size of the bitmap file to be used as a stamp.
Moving the slider to the right increases the size, moving the slider to the left decreases the size.
Transparent white area Specifies whether to make white-filled areas of the bitmap transparent.
Check this check box to make...