Canon Maxify Ib4020 User Guide

1660Cause
The ink tank is not installed.
Action
Install the ink tank.551
 

1688Cause
The ink has run out.
Action
Replace the ink tank and close the front cover.
Printing under the current condition may damage the machine.
If you want to continue printing in this condition, you need to release the function for detecting the
remaining ink level. Press and hold the machine's  Stop button for at least 5 seconds, and then release it.
With this operation, releasing the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable...

1700Cause
The ink absorber is almost full.
Action Press the printer's  OK button to continue printing. Contact the service center.553
 

1701Cause
The ink absorber is almost full.
Action Press the printer's  OK button to continue printing. Contact the service center.554
 

1754Cause
The ink tank is not installed properly.
Action Open the front cover.
Then push the ink tank.
After installing the ink tank properly, close the front cover.
If the problem is not resolved, contact the service center.
Important
•
The ink tank that was once installed cannot be removed until the ink runs out.
555
 

1755Cause
The ink has run out.
Action
To maintain both machine and print quality, the machine cannot continue printing under the ink out condition.
Cancel printing and replace the ink tank before printing again.
Important
•
Do not remove an ink tank until a new one is prepared to be installed.
•
Once you remove an ink tank, the machine will not operate until a new one is installed.
•
Once you remove an ink tank, the machine will not operate even if the removed ink tank is just
reinstalled.
556
 

1872Cause
The cassette 1 is not inserted.
Action
Insert the cassette 1.
Note
•
The cassette paper information registration screen is displayed after inserting the cassette 1. Register the cassette paper information according to the paper you loaded in the cassette 1.
•
If you want to cancel printing, press the printer's  Stop button.
557
 

1873Cause
The cassette 2 is not inserted.
Action
Insert the cassette 2.
Note
•
The cassette paper information registration screen is displayed after inserting the cassette 2. Register the cassette paper information according to the paper you loaded in the cassette 2.
•
If you want to cancel printing, press the printer's  Stop button.
558
 

1874Cause
The cassette 1 and the cassette 2 are not inserted.
Action Insert the both cassettes.
Note
•
The cassette paper information registration screen is displayed after inserting the cassettes. Registerthe cassette paper information according to the paper you loaded in the cassette 1 and the cassette
2.
•
If you want to cancel printing, press the printer's  Stop button.
559
 

1890Cause
The protective material for the print head holder or the tape may remain attached to the holder.
Action Open the front cover, then confirm that the protective material or the tape does not remain attached to the
print head holder.
If you find the protective material or the tape remains attached, remove it, then close the front cover.
If the problem is not resolved, contact the service center.
560