Canon Lv-s4 Multimedia Projector Owners Manual

							51
This symbol on the nameplate means the product is
Listed by Underwriters Laboratories Inc.  It is designed
and manufactured to meet rigid U.L. safety standards
against risk of fire, casualty and electrical hazards.
Appendix
The CE Mark is a Directive conformity
mark of the European Community (EC).
Some displays are not seen–Check the Display item.  (See “Setting” on page 38.)
during  the operation.
PIN code dialog box appears at start-up.–PIN code lock is being set.  Input a PIN code (1234 or numbers you have 
set).  (See “PIN code lock” on page 17 and 43.)
The Remote Control Unit does not work.–Check the batteries.
–Make sure no obstruction is between the projector and remote control unit.
–Make sure you are not too far from the projector when using the remote 
control.  Maximum operating range is 16.4’ (5m).
–Make sure the code of the remote control unit is conformed to the projector.
(See page 42.)
–Unlock Key lock for the remote control unit in the Setting Menu.  
(See page 42.)
WARNING :
High voltages are used to operate this projector.  Do not attempt to open the cabinet.
If problems still persist after following all operating instructions,
contact the dealer where you purchased the projector or the
service center.Give the model number and explain about the problem.  We will advise you how to obtain service.
Appendix 
						

							52
Appendix
Menu Tree
System (1)MODE 1MODE 2SVGA 1- - - -
Auto PC Adj.Fine sync.Total dotsHorizontalVerticalCurrent mode
ClampDisplay area
Display area HDisplay area VFull screenReset
Store
Quit
High contrastBlackboard(Green)Custom
Image AdjustContrastBrightnessColor temp.
RedGreenBlueGamma
Store
Quit
NormalTrueWideDigital zoom +Digital zoom –
0 - 31
On / Off
0 - 630 - 63
Computer Input
PC Adjust
640 x 480720 x 400800 x 6001024 x 7681152 x 8641280 x 10241400 x 1050
Mode 1Mode 2Mode 3Mode 4Mode 5
Image Select
High
0 - 630 - 630 - 630 - 15
Yes
Screen
Quit
Quit
Yes / No
No
✽Systems displayed in the System Menu vary
depending on an input signal.
Mid
ResetYes / No
Low
XLow
Computer Input / Video Input
Sound
VolumeMuteQuitOn / OffSound0 - 63
InputComputer 
Go to System(3)
✽N/A - - -not applicable
RGBGo to System(1)
Go to System(2)
N/A
Standard
Video
Go to System(3)
RGB( Scart )  
Component
S-Video
H-Sync freq.V-Sync freq.Quit
Mode 1Mode 2Mode 3Mode 4Mode 5Quit
Mode free
Adj.
Quit
Quit 
						

							53
Appendix
AutoPALSECAMNTSCNTSC 4.43PAL-MPAL-N
Video Input
Auto1080i1035i720p575p480p575i480i
CinemaBlackboard(Green)Custom
Quit
NormalWide
0 - 630 - 630 - 630 - 63
Off
Setting
Image Select
System (2)
System (3)
Image AdjustContrastBrightnessColorTint
RedGreenBlueSharpness
ResetStore
GammaProgressive
0 - 630 - 630 - 630 - 150 - 15
YesNo
Screen
Yes / No
HighColor temp.MidLow
XLow
L1L2
FilmOn/ Off
LanguageSettingEnglishGermanFrenchItalianSpanishPortugueseDutchSwedish
ChineseKoreanJapanese
Store / ResetOn / OffOn / Off
Off
On / OffOn / Off
Off
On / OffNormal
Code 1
Yes / No
KeystoneBlue backDisplay
Logo
CeilingRear
Power management
On startLamp mode
Remote controlCode 2
Quit
Russian
Yes/NoCapture
ReadyShut down
Auto
Yes / NoLamp counter reset
OffKey lockProjectorRemote Control Unit
DefaultUser
Timer(1-30 Min)Quit
Quit
PIN code lock entryPIN code lock
On1On2PIN code changeQuit
Off
Logo PIN code lock
On
PIN code changeQuit
Silent
Factory default
L1 / L2Fan
Quit
Standard
Logo PIN code entry
Off
Appendix
Adj.
Quit   
						

							54
Appendix
Check the indicators for projector condition.  
• • • emit green light• • • emit red light• • • off• • • blink green
✽When the life of the projection lamp draws to an end, the LAMP REPLACE indicator emits yellow light.  When this indicator emits
yellow light, replace the projection lamp with a new one promptly.  Reset the Lamp replace counter after replacement of the lamp.  
See page 48 and 49.
The projector is OFF.  (The AC power cord is unplugged.)
The projector is preparing for stand-by or the projection lamp is being
cooled down.  The projector cannot be turned on until cooling is completed. 
The temperature inside the projector is abnormally high.  The projector
cannot be turned on.  When  the projector is cooled down enough and the
temperature returns to normal, the POWER indicator emits red light and
the projector can be turned on.  (The WARNING indicator keeps blinking.)
Check and clean the air filters.
Projector Condition
The projector is ready to be turned on with the POWER button.
POWERred/green
Indicators
LAMP
REPLACE
yellow
WARNING red
The projector detects an abnormal condition and cannot be turned on.
Unplug the AC power cord and plug it again to turn on the projector.  If the
projector is turned off again, disconnect the AC power cord and contact the
dealer or the service center for service and checkup.  Do not leave the
projector on.  It may cause electric shock or a fire hazard.
✽
✽
✽
✽
✽
The projector is operating normally. 
The projector is in the Power management mode. 
✽
✽
The projector has been cooled down enough and the temperature returns
to normal.  When turning on the projector, the WARNING indicator stops
blinking.  Check and clean the air filters.
Indicators and Projector Condition
• • • blink red 
						

							55
Appendix
Compatible Computer Specifications
Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than
100 MHz of Dot Clock.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x 62449.7274.55
MAC 191024 x 76860.2475.08
MAC 211152 x 87068.6875.06
SVGA 1800 x 60035.15656.25
SVGA 2800 x 60037.8860.32
SVGA 3800 x 60046.87575.00
SVGA 4800 x 60053.67485.06
SVGA 5800 x 60048.0872.19
SVGA 6800 x 60037.9061.03
SVGA 7800 x 60034.5055.38
SVGA 8800 x 60038.0060.51
SVGA 9800 x 60038.6060.31
SVGA 11800 x 60038.0060.51
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
XGA 101024 x 768
XGA 111024 x 768
XGA 121024 x 768
XGA 131024 x 768
62.0477.07
XGA 141024 x 768
61.0075.70
XGA 151024 x 768
35.52286.96
(Interlace)
46.9058.20
XGA 81024 x 768
47.0058.30
XGA 91024 x 768
58.0372.00
SXGA 11152 x 864
63.4879.35
36.0087.17
(Interlace)
64.2070.40
SXGA 111152 x 900
SXGA 131280 x 1024
SXGA 141280 x 1024
61.2065.20
50.0086.00
(Interlace)
720p (HDTV)––––––––
50.0094.00
(Interlace)
45.0060.00
XGA 11024 x 768
XGA 41024 x 768
48.3660.00
XGA 61024 x 768
XGA 71024 x 768
56.47670.07
48.5060.02
44.0054.58
SXGA 171152 x 900
SXGA 181280 x 1024
61.8566.00
46.4386.70
(Interlace)
XGA 51024 x 76860.3174.92
VGA 7640 x 48043.26985.00
575i––––––––15.62550
(Interlace)480i––––––––15.73460
(Interlace)
1080i (HDTV)––––––––33.7560.00
(Interlace)1035i (HDTV)––––––––33.7560.00
(Interlace)SVGA 10800 x 60032.7051.09
1080i (HDTV)––––––––28.12550.00
(Interlace)
480p––––––––31.4759.88
575p––––––––31.2550.00
XGA 21024 x 76868.67784.997
XGA 31024 x 76860.02375.03
Appendix 
						

							56
Appendix
Technical Specifications
Mechanical Information
Projector Type Multi-media Projector
Dimensions (W x H x D) 10.63 x 3.27 x 7.76 (270mm x 83.1mm x 197.2mm) (not including Adjustable Feet)
Net Weight 5.1lbs (2.3 kg)
Feet Adjustment 0˚ to 8.0˚
Panel Resolution
LCD Panel System 0.5 TFT Active Matrix type, 3 panels
Panel Resolution 800 x 600 dots
Number of Pixels 1,440,000 (800 x 600 x 3 panels)
Signal Compatibility
Color SystemPAL, SECAM, NTSC, NTSC4.43, PAL-M, PAL-N
High Definition TV Signal480i, 480p, 575i, 575p, 720p, 1035i, and 1080i
Scanning FrequencyH-sync. 15 ~ 80 KHz, V-sync. 50 ~ 100 Hz
Optical Information
Projection Image Size (Diagonal) Adjustable from 34 to 200
Projection Lens F 1.6 ~ 1.8 lens with f 18.3 mm ~ 21.9 mm with manual zoom and focus
Throw Distance 4.3 ~ 21.3 (1.3m ~ 6.5m)
Projection Lamp 160W UHP Lamp
Interface
Video Input Jack RCA Type x 1 
Audio Input Jack Mini Jack (Stereo) x 1
Monitor Out Terminal (VGA) HDB15 Terminal X 1
Computer / S-Video / Component Input Terminal(VGA) HDB15 Terminal X 1
Service Port Connector Mini DIN 8 pin x 1
Audio Output Jack Mini Jack (stereo) x 1  (Variable)
Audio
Internal Audio Amp 0.8 W RMS
Built-in Speaker 1 speaker, ø1.3 (32mm) 
Power
Voltage and Power Consumption AC 100 ~ 120 V (3.6 A  Max. Ampere), 50 / 60 Hz  (The U.S.A and Canada)
AC 200 ~ 240 V (1.8 A  Max. Ampere), 50 / 60 Hz  (Continental Europe)
Operating Environment
Operating Temperature 41 ˚F ~ 95 ˚F (5 ˚C ~ 35 ˚C)
Storage Temperature 14 ˚F ~ 140 ˚F (-10˚C ~ 60 ˚C)
Remote Control Unit
Battery AAA, SUM-04 or LR03 type x 2
Operating Range 16.4’ (5m) / ±30˚
Dimensions 2.0”(W) x 0.91”(H) x 4.8”(D) (51.5mm x 23.2mm x 123mm)
Net Weight 2.11 oz (60 g) (including batteries) 
						

							57
Appendix
Model No.
COMPONENT-VGA Cable: LV-CA32
SCART-VGA Cable:LV-CA31
S-Video-VGA Cable : LV-CA33
Ceiling Hanger : LV-CL09
Presentation Remote Control Kit : LV-RC02
The parts listed below are optionally available.  When ordering those parts, give the item name and Model No. to the sales
dealer.
Optional Parts
Accessories
Owners Manual
AC Power Cord
Remote Control Unit and Batteries
VGA Cable
Lens Cover with String 
Soft Carrying Bag
PIN Code Label
●The specifications are subject to change without notice.
●LCD panels are manufactured to the highest possible standards.  Even though 99.99% of the pixels are effective,  a tiny fraction of
the pixels (0.01% or less) may be ineffective by the characteristics of the LCD panels.
●The On-Screen Menu and figures in this manual may differ slightly from the product.  
Appendix 
						

							58
Appendix
Terminal : Mini DIN 8-PIN
12345876
SERVICE PORT CONNECTOR COMPUTER INPUT/S-VIDEO INPUT/COMPONENT INPUT/MONITOR OUTPUT TERMINAL (ANALOG)
Terminal : HDB15-PIN 
512341096781514131112
Configurations of Terminals
Red (R/Cr) Input / Output
Ground (Horiz.sync.)
Green (G/Y) Input / Output
-----
Blue (B/Cb) Input / Output
Ground (Red)
Ground (Green)
Ground (Blue)
1
5
2
4
3
6
7
8
-----
Horiz. sync. Input/Output (Composite H/V sync.)
Ground (Vert.sync.)
-----
Ground /  -----
Vert. sync.
-----
9
13
10
12
11
14
15
R X D
-----
-----
GND
RTS / CTS
T X D
GND
GND
Serial
1
2
3
4
5
6
7
8 
						

							59
Appendix
Put the label below (supplied) on in a prominent place of the
projectors body while it is locked with a PIN code.
While the projector is locked with the PIN code...
Appendix
PIN code label 
						

							©CANON INC.  2005
YT1-1353-000
CANON INC.30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan
CANON U.S.A., INC. 
One Canon Plaza, Lake Success, NY 11042, U.S.A.
CANON CANADA, INC.
6390 Dixie Road Mississauga, Ontario L5T 1P7 Canada
CANON LATIN AMERICA, INC.
703 Waterford Way Suite 400 Miami, Florida 33126 U.S.A.
CANON MEXICANA, S.DE R.L.DE C.V. 
Blvd. M. A. Camacho No.138, Piso PB 15, 16 y 17, Col. Lomas de Chapultepec, 
C.P. 11000 México, D.F. México
CANON EUROPA N.V.
P.O.Box 2262, 1180 EG Amstelveen, The Netherlands
CANON COMMUNICATION & IMAGE FRANCE S.A.
102, Avenue du General de Gaulle, 92250 La Garenne Colombes, France
CANON (UK) LTD.
Woodhatch, Reigate, Surrey RH2 8BF, United Kingdom
CANON DEUTSCHLAND GmbH
Europark Fichtenhain A 10, 47807 Krefeld, Germany
CANON ITALIA S.p.A.
Via Milano 8, I-20097 San Donato Milanese (MI), Italy
CANON (Schweiz) A.G.
Industriestrasse 12, 8305 Dietlikon, Switzerland
CANON BELGIUM N.V./S.A
Bessenveldstraat 7, 1831 Diegem, Belgium
CANON GmbH
Zetschegasse 11, A-1232 Wien, Austria
CANON ESPANA S.A.
C/Joaquin Costa 41, 28002 Madrid, Spain
CANON SVENSKA AB
Stensätravägen 13, S-127 88 Skarholmen 2, Sweden
CANON NORGE A/S
Hallagerbakken 110, P. O. Box 2-33, Holmlia 1201 Oslo 12, Norway
CANON OY
Huopalahdentie 24, P.O. Box 1, FIN-00351 Helsinki, Finland
CANON HONGKONG CO., LTD.
19/F., The Metropolis Tower, 10 Metropolis Drive, Hunghom, Kln., H. K.
CANON SINGAPORE PTE. LTD.
1 HarbourFront Avenue #04-01, Keppel Bay Tower Singapore 098632
CANON AUSTRALIA PTY. LTD.
1 Thomas Holt Drive, North Ryde, Sydney, N.S.W.2113, Australia
CANON NEW ZEALAND LTD.
Akoranga Business Park, Akoranga Drive, Northcote, Auckland, New Zealand
CANON DENMARK A/S
Knud Hoejgaards Vej, DK-2860 Soeborg, Denmark
1AA6P1P4793-- (MR7P)PRINTED IN CHINA