Canon Lbp 5000 User Guide

4-58
Printing a Document
Using the Various Printing Functions
4
2Confirm the settings, then click [OK].
3Click [OK] or [Print].
The printer starts printing.
Printing with Upper Left of Sheet as Starting Point
Since printing is usually performed with the upper-left 5 mm (10 mm for envelopes) 
margin within the printable area of a sheet as the starting point, a certain portion 
(lower right) may be missing when printing data with no margin. In this case, you 
can print with the upper-left 0 mm margin as the...

4-59
Printing a Document
4
Using the Various Printing Functions
2Select the [Print with Upper Left of Sheet as Starting Point] 
check box.
3Confirm the settings, then click [OK].
The [Finishing] sheet reappears.
4Click [OK].
5Click [OK] or [Print].
The printer starts printing.
Printing with the Data 180 Degrees Rotated
Prints with the image 180 degrees rotated.
This option is useful for printing envelopes and Index Card size media that can be 
fed only in specific orientations.
 

4-60
Printing a Document
Using the Various Printing Functions
4
1Display the [Finishing] sheet, then click [Finishing Details].
2Select the [Rotate Print Data 180 Degrees] check box.
3Confirm the settings, then click [OK].
The [Finishing] sheet reappears.
4Click [OK].
5Click [OK] or [Print].
The printer starts printing.
 

4-61
Printing a Document
4
Using the Various Printing Functions
Smoothing Out Rough-Textured Images
When image data such as photographic images are enlarged in size in an 
application and printed, the printed images can look rough or jagged. You can print 
this kind of low-resolution image data with smoothing it out.
1Display the [Quality] sheet, then click [Settings].
2Select the [Enable Image Correction] check box.
 

4-62
Printing a Document
Using the Various Printing Functions
4
3Confirm the settings, then click [OK].
The [Quality] sheet reappears.
4Click [OK].
5Click [OK] or [Print].
The printer starts printing.
Printing with Toner Density Adjusted
You can print with the toner density of each color (black, yellow, magenta, and 
cyan) adjusted.
1Display the [Quality] sheet, then click [Settings].
 

4-63
Printing a Document
4
Using the Various Printing Functions
2Adjust the toner density by dragging the [Toner Density] 
slider of each color from side to side.
Move the slider to the right to make it denser and to the left to make it lighter.
3Confirm the settings, then click [OK].
The [Quality] sheet reappears.
4Click [OK].
5Click [OK] or [Print].
The printer starts printing.
 

4-64
Printing a Document
Using the Various Printing Functions
4
Color Settings
You can perform color printing with the colors originally specified.
1Display the [Quality] sheet, select the [Manual Color Settings] 
check box, and then click [Color Settings].
2Display the [Color Adjustment] sheet, then adjust the colors 
by moving the [Preview Image] at the center of [Adjustment 
Grid] from side to side or up and down.
When [Preview Image] is in the center, the image has not been adjusted. There 
are three...

4-65
Printing a Document
4
Using the Various Printing Functions
•Dragging [Preview Image] in the center onto the desired color.
3Confirm the settings, then click [OK].
The [Quality] sheet reappears.
If you are using Windows 2000/XP/Server 2003, you can print an adjusted color sample. 
For more details, see Printing a Color Sample (Windows 2000/XP/Server 2003 only), 
on p. 4-68.
 

4-66
Printing a Document
Using the Various Printing Functions
4
Specifying the Brightness and Contrast
You can perform color printing with the brightness and contrast specified.
1Display the [Quality] sheet, select the [Manual Color Settings] 
check box, and then click [Color Settings].
 

4-67
Printing a Document
4
Using the Various Printing Functions
2Display the [Color Adjustment] sheet, then adjust the 
brightness and contrast for the print data.
Move the [Brightness] slider to the right to make it lighter and to the left to make it 
darker.
Move the [Contrast] slider to the right to make it higher and to the left to make it 
lower.
3Confirm the settings, then click [OK].
The [Quality] sheet reappears.
If you are using Windows 2000/XP/Server 2003, you can print a sample after adjusting...