Canon large format printer imagePROGRAF iPF6400 User Manual

SettingDetailsPrint Area Layout*You can change the image print position when you drag the image while the cursor is displayedas .ImageThe entire image is displayed.
 
*You can select the print range when you drag the image while the cursor is displayed as .*When you click the image while the cursor is displayed as , the selected area is deselected.Roll Paper PreviewDisplay the media size and roll paper information on the top in the layout printing on roll paper.
 
*To select Roll Paper Preview, select...

Main Sheet
Main Sheet
You can use this sheet to perform basic settings such as selecting a printer, setting the media type, or adjusting image
quality.
•
Printer
The printer types are displayed.
•
Select  button
Click this button to display the  Select Printer dialog box.
When you click the  OK button after selecting the printer in the  Select Printer dialog box, you can change the print-
er that corresponds with Print Plug-In for Photoshop/Digital Photo Professional.
•
Media Type
This allows you to...

SettingDetailsHigh Gradation 8bitThis processes images with at 8bit/channel (24 bit).Highest Gradation 16bitThis processes images with at 16bit/channel (48 bit).
 
*This may not be displayed depending on how you set Media Type and Input Resolution toPlug-in.•
Print Mode
Selecting the printing mode strikes the balance between the quality of the printed image and printing speed.
The following settings are available for the print mode.
SettingDetailsHighestA setting for printing at the highest resolution...

•
Matching Method
You can select the processing method when performing color conversion.The following settings are available for the matching method.
SettingDetailsPerceptualThis converts the image to an image with natural color balance and gradation. This is useful forpictures.SaturationThis converts the image to an image with heightened color saturation. The color balance of pic-tures and drawings may change.Relative ColorimetricThis converts the image with emphasis on color balance before the...

Page Setup Sheet
Page Setup Sheet
You can use this sheet to set the size of the image to be printed, the media size, and whether to enlarge/reduce the
image.
•
Input Image Size
The size of the image imported to Print Plug-In for Photoshop/Digital Photo Professional is displayed.
•
Borderless Printing
When you place a checkmark here, the  Specify Roll Paper Width dialog box is displayed and you can print an
image without borders.
For more information about  Borderless Printing, see " Print with No...

Note
•When Paper Size is smaller than Output Image Size, part of the image may not print.•
Paper Size
You can select the size of the print media.
Note
•This is not displayed when a checkmark is placed in Borderless Printing.•This is not displayed when Fit Roll Paper Width is set in Enlarged/Reduced Printing.•
Orientation
This selects the print orientation.
The following settings are available for orientation.
SettingDetailsPortraitPrints the image on the media as it appears on the screen.LandscapePrints...

SettingDetailsManual (3mm margins)Select for manual paper feed printing when you want to minimize the margin at the far end edgeof paper.Roll PaperSelect to print on roll paper.
Note
•When you select Manual (3mm margins) for Paper Source, the far end edge of printed image may become defectivedepending on the paper used. If this happens, select another media source.•
Roll Paper Options button
Click this button to open the  Roll Paper Options dialog box, where you can set roll paper width and perform auto...

•
Brightness
You can adjust the brightness of the printed image without losing the brightest and darkest areas by either input-
ting a numerical value or dragging the slide bar.
•
Contrast
You can relatively adjust the brightness of the brightest and darkness areas by either inputting a numerical value
or dragging the slide bar.
•
Saturation
You can adjust the saturation of vivid color balance to dark color balance by either inputting a numerical value or dragging the slide bar.
•
Adjustment pattern...

Drag the vertical or horizontal scroll bars for adjustment, as desired.
You can click the arrows by the  X (horizontal) and  Y (vertical) boxes or enter the values directly.•
Tone
You can adjust the brightness of intermediate tones in an image. Selecting  Hard tone gives a hard impression
with more definition. Selecting  Soft tone gives a soft impression.
•
Brightness
You can adjust the brightness of the printed image without losing the brightest and darkest areas by either input-
ting a numerical value...

•
Print History and Favorites
This displays a list of print preferences.
Select  Restore Defaults  and click the Apply button to restore all settings to their initial settings.Note
•You can check the 3 print preferences in the preview display.•
Apply button
When you click the button, the print setting content applies to the current image selected with  Print History and
Favorites .
 
•
Details  button
Click the Details button to open the  Print History Details dialog box, where you can manage print...